Abstract:The evolution of phase composition and mechanical properties and the formation of oxide layers on Fe40–xNiCoCrAlx (x = 5 and 10 at.%) alloys in long-term oxidation at 900 and 1000°C were studied. In the initial cast state, depending on the aluminum content and valence electron concentration, the alloys contain only an fcc solid solution (VEC = 8 e/a) or a mixture of fcc and bcc phases (VEC = = 7.75 e/a). Thin continuous oxide scales containing Cr2O3 and NiCr2O4 spinel formed on the surface of both alloys oxidized at 900°C for 50 h. A further increase in the annealing time to 100 h leads to the formation of aluminum oxide Al2O3 in the scale on the Fe30Ni25Co15Cr20Al10 alloy, having high protective properties. An increase in the oxidation temperature to 1000°C results in partial failure of the protective layer on the alloy with 10 at.% Al. Long-term holding at 900°C (100 h) + 1000°C (50 h) does not change the phase composition of the Fe35Ni25Co15Cr20Al5 alloy matrix, being indicative of its high thermal stability. In the two-phase Fe30Ni25Co15Cr20Al10 alloy, the quantitative ratio of solid solutions sharply changes: the amount of the bcc phase increases from 4 to 54 wt.% and its B2-type ordering is observed. The mechanical characteristics of the starting alloys and those after long-term high-temperature annealing were determined by automated indentation. The hardness (HIT) and elastic modulus (E) of the cast Fe35Ni25Co15Cr20Al5 alloy are equal to 2 and 147 GPa, respectively, and decrease to 1.8 and 106 GPa after a series of long-term annealing operations. The Fe30Ni25Co15Cr20Al10 alloy shows the opposite dependence: HIT increases from 2.5 in the initial state to 3.1 GPa after annealing and E decreases from 152 to 134 GPa. This indicates that the Fe30Ni25Co15Cr20Al10 alloy is promising as a high-temperature oxidation-resistant and creep-resistant material.

Investigation on chemical stability of alloy carbides at high temperature

INFLUENCE OF CARBIDE STABILITY ON WEAR RESISTANCE OF ALLOY AT ELEVATED TEMPERATURE

Effect of Phase Stability on the Wear Resistance of White Cast Iron at 800°C

Thermal stability of carbides in a Ni-based single crystal superalloys

Effect of Anti-oxidation Stability of Carbides and Its Synergism with Matrix on Wear Resistance of High Cr-Ni Alloy Cast Iron at Elevated Temperature

Microstructure of a novel Ni-Cr-W-Mo-V containing ductile iron and decomposition behavior of its eutectic carbides at elevated temperature

Thermal stability of microstructures and mechanical properties in a Fe-based Fe-Cr-Mn-Cu-Mo multi-component alloy

Element diffusion behaviors at high temperature and their effects on microstructure and tribological properties of Cr2O3 films

Studies on As-Cast Microstructure and Oxidation Behavior of the FeCrBAl Alloys at 1073 K

Dissolution Behavior of Eutectic Carbides in Medium-Alloy Steels for Heavy Forgings

Stability of FeCrNiTiAl high-entropy alloy at high temperature

High temperature oxidation behavior of a novel Ni-Cr-W-Al-Ti superalloy

Effect of temperature on mechanical properties of Al0.5CoCrCuFeNi wrought alloy

Research of Fe-Cr Alloys Properties at High Temperature

Structural State of High-Entropy Fe40–xNiCoCrAlx Alloys in High-Temperature Oxidation

Effect of Temperature on Oxidation Resistance and Isothermal Oxidation Mechanism of Novel Wear-Resistant Fe-Cr-B-Al-C-Mn-Si Alloy

Exploring the Influence of Nanocrystalline Structure and Aluminum Content on High-Temperature Oxidation Behavior of Fe-Cr-Al Alloys

Effect of Microstructure on High Temperature Mechanical Properties in Forming Ni-20cr-10mo-10co Superalloy

Effects of Mn, V, Mo, Ti, Zr elements on microstructure and high temperature oxidation performance of AlFeCrCoCu-X high-entropy alloys

High-Temperature Rheological Behavior and Microstructure Evolution of Mo-12Si-8.5B Alloy Reinforced by Layered Mo2TiAlC2 Phase

Effects of Ni and Cr on the high-temperature oxidation behavior and mechanisms of Co- and CoNi-base superalloys