Multivariable decoupling self-tuning control for MIMO bilinear system

Xi Sun,Yihui Jin,Chongzhi Fang

1997-01-01

Abstract:A mulitivariable self-tuning decoupling controller for a MIMO bilinear system is presented. The global convergence of the controller is established. Simulation results show the effectiveness of the controller.

What problem does this paper attempt to address?

Command Filter-Based I I Adaptive Control for MIMO Uncertain Systems with Input Saturation and Disturbances

Qi Han,Zhitao Liu,Hongye Su,Xiangbin Liu

DOI: https://doi.org/10.1007/s11432-022-3770-2

2023-01-01

Science China Information Sciences

Abstract:This paper develops a control strategy based on immersion and invariance (I I) adaptive methodology for a class of multi-input multi-output (MIMO) systems in the presence of parametric uncertainty, input saturation, and external disturbance. To avoid the analytic calculation in the backstepping process, a high-gain auxiliary system is constructed to compensate for the effect of command filter error. The first-order command filters are also employed in the construction procedure of the I I adaptive law to simplify its design and remove the structural conditions on the regressors. A filter-based disturbance observer is developed to counteract the effect of the external disturbance produced by a partially known exogenous system. To overcome the input saturation nonlinearity, a smooth function is introduced to approximate the input saturation with an extended state and a bounding estimation law. Stringent analysis guarantees the stability of closed-loop system. Finally, simulated examples confirm the effectiveness of the suggested method.
AN IMPROVED OPTIMAL ADAPTIVE CONTROL METHOD FOR MIMO SINE VIBRATION CONTROL OF A MULTICHANNEL COUPLED SYSTEM

Chao Li,Zhangwei Chen,Hongfei Zu,Yugang Zhao

DOI: https://doi.org/10.1115/imece2018-86983

2018-01-01

Abstract:This paper proposes an improved optimal adaptive control algorithm to accelerate convergence for sine control of general multichannel coupled system, as well as enhance the stability. First of all, the convergence of traditional multi-input multi output (MIMO) sine control method is analytically investigated in the presence of frequency response function (FRF) error. Then, the controller with the improved optimal adaptive control algorithm is developed, where a high-precision algorithm for amplitude and phase estimation is proposed to guarantee the accuracy of the response vector calculation. Numerical simulation results show that the proposed method possess excellent performance with fast convergence rate and strong robustness.
A Self-Tuning Decoupling Controller for A Class of Multivariable Bilinear Systems

X Sun,YH Jin,CZ Fang

DOI: https://doi.org/10.1109/icit.1996.601540

1994-01-01

Abstract:This paper presents a new self - tuning decoupling controller for a class of multivariable bilinear Systems. The controller employs a slightly modified recursive least - squares estimator and uses a generalized minimum variance control technique. The proof of global convergence of the controller is given.
Towards a multivariable auto-tuner

Yucai Zhu,Esther T. Serrano,Siep Weiland

DOI: https://doi.org/10.3182/20050703-6-cz-1902.00110

2005-01-01

IFAC Proceedings Volumes

Abstract:An MIMO auto-tuning method is develop that can be used by a layman of control. The method is based on MIMO identification and robust control design. The identification part delivers process model and model error bounds. The controller design block performs control synthesis, simulation and robust analysis. All steps can be done automatically. The parameters the user needs to enter are minimal and easy to understand and to obtain. The developed scheme is applied to a high-precision wafer stage motion control using simulations. The step tracking performance is optimized using the method and it is compared with a multi-loop PID controller.
Iterative Learning Control for MIMO Second-Order Hyperbolic Distributed Parameter Systems with Uncertainties

Xisheng Dai,Chao Xu,Senping Tian,Zhenglin Li

DOI: https://doi.org/10.1186/s13662-016-0820-8

2016-01-01

Advances in Difference Equations

Abstract:In this paper, we consider an iterative learning control (ILC) problem for a class of multiinput-multioutput (MIMO) second-order hyperbolic distributed parameter systems with uncertainties. A P-type ILC scheme is proposed in the iteration procedure for distributed systems with an initial deviation in the state. A convergence of tracking error with respect to the iteration index can be guaranteed in the sense of \(\mathbf{L}^{2}\) norm. Feasibility in theory of the iterative learning algorithm with difference method is proposed. Numerical simulation results are presented to illustrate the effectiveness of the proposed ILC approach.
A Multivariate Bilinear Self—Tuning Controller*

Xi Sun,Yihui Jin,Chongzhi Fang

DOI: https://doi.org/10.1016/S1474-6670(17)58467-0

1996-01-01

IFAC Proceedings Volumes

Abstract:This paper describes a new multivariable bilinear self—tuning controller with a generalized minimum variance control technique. The controller can control a multivariable bilinear system whose linear part is not necessarily minimum phase. The theoretical proof of global convergence of the control algorithm is given.
Predictive Function Control Based on Global Feedback Linearization for MIMO Bilinear System

张智焕,王树青,荣冈

DOI: https://doi.org/10.3969/j.issn.1000-8152.2003.03.035

2003-01-01

Abstract:The predictive function control (PFC) strategy is developed for MIMO bilinear system. It is a kind of double layer control strategy and based on global feedback linearization of nonlinear system. The geometric tool needed here includes the input-output linearization theory. This methodology relies upon the exact cancellation of nonlinear term using state feedback, and closed loop model of the MIMO bilinear system is linearized and decoupled. Based on the input-output decoupled and linearized model, the predictive function controller is designed. The SISO models are given in the lower layer, the parameter varies and decoupled approximation are overcome by robust of PFC in the higher layer. Simulation result shows that the performance of the derived control strategy is satisfying.
Multilinear Model Decomposition of MIMO Nonlinear Systems and Its Implication for Multilinear Model-Based Control

Jingjing Du,Chunyue Song,Yuan Yao,Ping Li

DOI: https://doi.org/10.1016/j.jprocont.2012.12.007

IF: 3.951

2013-01-01

Journal of Process Control

Abstract:In order to accomplish the multilinear model decomposition of MIMO nonlinear processes with multiple scheduling variables, a systematic division algorithm based on gap metric together with a supporting dichotomy gridding algorithm is proposed by using the gap metric as a measuring tool. For a prescribed distance level, this gap metric based division algorithm effectively decomposes a MIMO nonlinear system into a set of linear subsystems which provide enough model information for multilinear model-based controller design without linear model redundancy. Based on the linear models, a set of linear MPC controllers are designed and combined into a global controller for setpoint tracking control. Two benchmark nonlinear processes are studied to demonstrate the effectiveness of the proposed method. (C) 2012 Elsevier Ltd. All rights reserved.
MIMO decoupling control based on support vector machines αth-order inversion

FuHua Song,Ping Li

DOI: https://doi.org/10.1109/WCICA.2006.1712495

2006-01-01

Abstract:Combining inverse system method and support vector machines (SVM), the paper presents an αth-order inverse system method based on SVM for general nonlinear MIMO discrete systems. The nonlinear offline inverse model of the controlled plant is built by SVM with the radial basis function (RBF) kernel. Cascading SVM ath-order inversion with the original system can form a pseudo-linear system. So the traditional linear system methods can be used in a nonlinear system. Simulations demonstrate that even without prior information about the plant, the method presented can accurately model the inverse dynamic system of the plant. This method can apply to general nonlinear MIMO discrete systems, and can be easily implemented for engineering. © 2006 IEEE.
Analytical decoupling control strategy using a unity feedback control structure for MIMO processes with time delays

Tao Liu,Weidong Zhang,Furong Gao

DOI: https://doi.org/10.1016/j.jprocont.2006.08.010

IF: 3.951

2007-01-01

Journal of Process Control

Abstract:An analytical decoupling control method is proposed for multiple-input–multiple-output (MIMO) processes with multiple time delays. The desired diagonal system transfer matrix is proposed first in terms of the H2 optimal performance specification, resulting in the ideal desired decoupling controller matrix derived within the framework of a unity feedback control structure. It is demonstrated that dead-time compensators must be enclosed in the decoupling controller matrix to realize absolute decoupling for MIMO processes with multiple time delays. To alleviate the difficulties associated with the implementation, the ideal desired decoupling controller matrix is transformed into a practical form using an analytical approximation approach. Correspondingly, the stability of the resultant control system is assessed, together with its robust stability in the presence of process uncertainties. An on-line tuning rule for the single adjustable parameter of each column controllers in the decoupling controller matrix is given to cope with the process unmodeled dynamics. Finally, illustrative examples are given to show the superiority of the proposed method over the recently improved decoupling control methods.
MIMO system simultaneous stabilization asymptotic tracking and static decoupling performance design

Da-yong DING,De-jin WANG

DOI: https://doi.org/10.3969/j.issn.1001-7011.2001.01.009

2001-01-01

Abstract:Based on received results and with the internal model principle, the authors discuss the controller design problem for MIMO satisfying asymptotic tracking and static decoupling performance of simultaneous stabilization.
Decoupling Controller with Disturbance Observer for LTI MIMO Systems

Hao Yin,Shuyi Lin,Fei Ye,Weidong Zhang

DOI: https://doi.org/10.1002/asjc.1947

IF: 2.4

2018-01-01

Asian Journal of Control

Abstract:In this paper, a decoupling multivariable control strategy for linear time‐invariant (LTI) multi‐input/multi‐output (MIMO) systems is proposed. The strategy includes a multivariable disturbance observer (MDOB) and a decoupling controller. This MDOB is introduced to improve the system performances when the system encounters severe external disturbances. H2 optimal scheme is utilized to design the MDOB filter. The controller is developed based on an inverse control method, through which the design process can be simplified. Simulation results certify the effectiveness of the proposed control strategy.
Predictive Functional Control and Stability Analysis of MIMO Bilinear Systems

Bin Zhang,Xiaoyan Wang,Youchun Tang,Weidong Zhang

DOI: https://doi.org/10.1109/acc.2006.1657489

2006-01-01

Abstract:This paper describes the use of predictive functional control algorithm to MIMO bilinear systems. In order to facilitate the online calculation, aggregation as part of algorithm is used to deal with the future predicted values of the state variables, which leads to that the design procedure does not linearize the nonlinear model, as a result a QP problem is the one requiring solution at each step. Further, the paper discusses the local asymptotic stability of the closed loop control system based on Lyapunov stability method. Last, illustrative simulations are provided to show that the proposed method is effective and owns the efficient robustness for system parameters perturbation
Adaptive Neural Control of MIMO Nonlinear Systems in Block-triangular Pure-feedback Form

SS Ge,C Wang

DOI: https://doi.org/10.1016/s1474-6670(17)32940-3

2001-01-01

IFAC Proceedings Volumes

Abstract:In this paper, an adaptive neural control scheme is proposed for a class of MIMO nonlinear systems in block-triangular pure-feedback form. The MIMO system is composed of interconnected subsystems. Each subsystem is in the pure-feedback form with all the nonlinearities unknown. Firstly, we design for each subsystem an adaptive neural controller by using backstepping methodology. With the help of NN approximation, there is no need to solve the implicit functions for the explicit virtual controls to cancel the unknown functions in backstepping design. Secondly, by exploiting the structure properties of the MIMO system, we conclude the stability of the whole closed-loop MIMO system by stability analysis of all the signals in the closed-loop in a nested iterative manner. Semi-global uniform ultimate boundedness of all the signals in the closed-loop of MIMO nonlinear systems is guaranteed. The outputs of the systems are proven to converge to small neighborhoods of the desired trajectories. The control performance of the closed-loop system is guaranteed by suitably choosing the design parameters.
Almost disturbance decoupling control of mimo nonlinear system subject to feedback linearization and a feedforward neural network: Application to half-car active suspension system

T. H. S. Li,C. J. Huang,C. C. Chen

DOI: https://doi.org/10.1007/s12239-010-0070-9

2010-07-21

International Journal of Automotive Technology

Abstract:A novel tracking and almost disturbance decoupling problem of multi-input, multi-output (MIMO) nonlinear systems based on feedback linearization and a multi-layered feedforward neural network approach has been proposed. The feedback linearization and neural network controller guarantees exponentially global uniform ultimate bounded stability and almost disturbance decoupling performance without using any learning or adaptive algorithms. The new approach renders the system to be stable with the almost disturbance decoupling property at each step when selecting weights to enhance the performance if the proposed sufficient conditions are maintained. One example, which cannot be solved by the existing approach of the almost disturbance decoupling problem because it requires the sufficient conditions that the nonlinearities that multiply the disturbances satisfy structural triangular conditions, is proposed to exploit the fact that the tracking and the almost disturbance decoupling performances are easily achieved by the proposed approach. In order to demonstrate the practical applicability, a famous half-car active suspension system is investigated.

engineering, mechanical,transportation science & technology
Two-degree-of-freedom Controller Design for MIMO Systems with Multiple Time Delays Based on Inversing Decoupling

Zhang Wei,Sun Bo,Zhang Xi,Zhang Weidong

2013-01-01

Abstract:In this paper, a two-degree-of-freedom (TDOF) controller design method for multi-inputs multi-outputs (MIMO) system with multiple time delays based on inversing decoupling is proposed. Firstly, an inversing decoupling method based on the factorization of the plant is developed. Secondly, the H2 optimal controller design method is applied to the decoupled single-input/single-output (SISO) system after the system has been decoupled. Finally, a TDOF controller is designed for the decoupled closed-loop system. Compared with other developed methods, the proposed design method has two main advantages. One is that the design procedure is simple and the obtained controllers are given in analytical form. The other is that better performance can be achieved since the TDOF control structure can isolate the disturbance from the reference. Simulations are provided to illustrate the effectiveness of the proposed design approach.
Analytical Design And Tuning Method Of Multivariable Controller For Multi-Input-Multi-Output (Mimo) Processes

PeiYing Chen,Yang Liu,Weidong Zhang,Jie Bao

DOI: https://doi.org/10.1109/ACC.2007.4282312

2007-01-01

Abstract:This paper proposes a new analytical method for multivariable control design for a class of stable linear multi-input-multi-output (MIMO) processes. By using the unity feedback structure, a multivariable controller with full matrix form is derived based on Internal Model Control (IMC) theory. The proposed design approach provides a single adjustable parameter for each control loop. Two analytical computation methods are developed to obtain the control parameters according to the robust stability condition and nominal performance. Simulation results are presented to demonstrate the effectiveness of the proposed control and tuning scheme.
MIMO system simultaneous stabilization asymptotic tracking and disturbance attenuation performance design

DING Da-yong,WANG De-jin

DOI: https://doi.org/10.3969/j.issn.1001-7011.2000.04.010

2000-01-01

Abstract:Based on the stable coprime factorization resulted in the parameterization result of simultaneously stabilizing controller, the internal model principle of eliminating system steadystate error and the result of SISO, the authors discuss the controller design problem for MIMO satisfying asymptotic tracking and disturbance attenuation performance of simultaneous stabilization.
Same controller in all loops controller design for multivariable systems with multiple time delays based on ideal decoupler

Zhang Wei,Sun Bo,Yang Bo,Zhang Weidong

DOI: https://doi.org/10.1109/ChiCC.2014.6895537

2014-01-01

Abstract:In this paper, a two-degree-of-freedom (TDOF) control scheme for multi-input/multi-output (MIMO) systems with multiple time delays is proposed. First, a novel inversing decoupler design method based on the ideal decoupling is proposed for decoupling the MIMO system with multiple time delays into several same independent single-input/single output (SISO) systems. Then the H2 proportion-integral-derivative (PID) controller based on the internal model control (IMC) is applied to the obtained SISO systems. Finally, the second controller is developed according to the decoupled closed-loop transfer function. Since the decoupled SISO systems are the same, only one PID controller should be designed for the independent SISO systems. The proposed method can simplify the design task significantly. Moreover, because the TDOF control structure can isolate the disturbance from the reference, the controller of the reference loop can be used to improve the reference response independently. Simulations are provided to illustrate the effectiveness of the proposed design approach.
Multivariable Disturbance Observer-Based H-2 Analytical Decoupling Control Design For Multivariable Systems

Wei Zhang,Yagang Wang,Yurong Liu,Weidong Zhang

DOI: https://doi.org/10.1080/00207721.2015.1036479

IF: 2.648

2016-01-01

International Journal of Systems Science

Abstract:In this paper, an H-2 analytical decoupling control scheme with multivariable disturbance observer for both stable and unstable multi-input/multi-output (MIMO) systems with multiple time delays is proposed. Compared with conventional control strategies, the main merit is that the proposed control scheme can improve the system performances effectively when the MIMO processes with severe model mismatches and strong external disturbances. Besides, the design method has three additional advantages. First, the derived controller and observer are given in analytical forms, the design procedure is simple. Second, the orders of the designed controller and observer are low, they can be implemented easily in practice. Finally, the performance and robustness can be adjusted easily by tuning the parameters in the designed controller and observer. It is useful for practical application. Simulations are provided to illustrate the effectiveness of the proposed control scheme.

Multivariable decoupling self-tuning control for MIMO bilinear system

Command Filter-Based I I Adaptive Control for MIMO Uncertain Systems with Input Saturation and Disturbances

AN IMPROVED OPTIMAL ADAPTIVE CONTROL METHOD FOR MIMO SINE VIBRATION CONTROL OF A MULTICHANNEL COUPLED SYSTEM

A Self-Tuning Decoupling Controller for A Class of Multivariable Bilinear Systems

Towards a multivariable auto-tuner

Iterative Learning Control for MIMO Second-Order Hyperbolic Distributed Parameter Systems with Uncertainties

A Multivariate Bilinear Self—Tuning Controller*

Predictive Function Control Based on Global Feedback Linearization for MIMO Bilinear System

Multilinear Model Decomposition of MIMO Nonlinear Systems and Its Implication for Multilinear Model-Based Control

MIMO decoupling control based on support vector machines αth-order inversion

Analytical decoupling control strategy using a unity feedback control structure for MIMO processes with time delays

MIMO system simultaneous stabilization asymptotic tracking and static decoupling performance design

Decoupling Controller with Disturbance Observer for LTI MIMO Systems

Predictive Functional Control and Stability Analysis of MIMO Bilinear Systems

Adaptive Neural Control of MIMO Nonlinear Systems in Block-triangular Pure-feedback Form

Almost disturbance decoupling control of mimo nonlinear system subject to feedback linearization and a feedforward neural network: Application to half-car active suspension system

Two-degree-of-freedom Controller Design for MIMO Systems with Multiple Time Delays Based on Inversing Decoupling

Analytical Design And Tuning Method Of Multivariable Controller For Multi-Input-Multi-Output (Mimo) Processes

MIMO system simultaneous stabilization asymptotic tracking and disturbance attenuation performance design

Same controller in all loops controller design for multivariable systems with multiple time delays based on ideal decoupler

Multivariable Disturbance Observer-Based H-2 Analytical Decoupling Control Design For Multivariable Systems