Application of wavelet transform to fault detection

Hao Ye,GuiZeng Wang,Chongzhi Fang

1997-01-01

Abstract:By using wavelet transform a new approach of fault detection in dynamic systems is presented. It has good sharpness of response to faults and robustness to noise. Results of simulation are given.

What problem does this paper attempt to address?

Power System Fault Detection Based on Stationary Wavelet Packet Transform and Hilbert Transform

Yi-Hua Liu,Guang-Zhou Zhao

DOI: https://doi.org/10.1109/CISP.2008.380

2008-01-01

Abstract:Based on stationary wavelet packet transform and Hilbert transform, the paper proposes a fault detection algorithm, which adaptively extracts the fault characteristic component of the signal. Firstly, the algorithm uses one-level stationary wavelet packet transform to decompose the signal into low- and high-frequency sub-bands. Subsequently, Hilbert transform is used to obtain the instantaneous frequency and instantaneous amplitude of the low- or high-frequency sub-band. Based on the preset frequency and amplitude criteria, the algorithm decides whether to further decompose the sub-band or hold it. Thus the algorithm adaptively selects the path of stationary wavelet packet decomposition, making a multi-resolution spectral analysis on the signal and extracting the characteristic components for fault detection. The simulations show that the algorithm provides sufficient frequency-amplitude fault information with the less computational workloads and has better anti-noise performance.
Fault Detection in Dynamic Systems Based on Wavelet Transform

H Ye,GZ Wang,CZ Fang

DOI: https://doi.org/10.1016/s1474-6670(17)42561-4

1998-01-01

Abstract:A new method of fault detection based on wavelet transform is presented in this paper. It needs no model of the monitored object. Experimental results on a long petroleum transport pipeline and a model vehicle showed that it is sensitive to faults and robustness to noises.
Wavelet Fault Detection Based on Filtering Pretreatment

Guangzhou Zhao

2007-01-01

Abstract:Noise degrades most existing fault detection methods based on singularity analysis.A method based on wavelet module maxima of the pretreated electric signal is proposed.As wavelet module maxima occur at peaks of signal,the pretreatment removes power frequency periodic components from electric signal and thus avoids misjudgments of fault.Wavelet transform decomposes fault component and noise into different scale spaces,which guarantees the abstraction of fault signature and the de-noising performance.The simplified Mallat singularity detection method not only reduces the computational complexity,but also keeps the localization accuracy.Simulations show that the fault detection method is precise for fault locating and insensible to noise.The method can also be applied to other periodic signal analysis.
Application of Wavelet Transform to Fault Diagnosis in Long Vehicle

Ye Hao,Wang Guizeng,Fang Chongzhi,Zhang Yongguang,Qiu Jie,Liu Zhijun

DOI: https://doi.org/10.5687/sss.1996.53

1996-01-01

Proceedings of the ISCIE International Symposium on Stochastic Systems Theory and its Applications

Abstract:This paper presents a new non-model approach of fault detection via wavelet transform and its application to the fault detection of a long vehicle. It has good sharpness of response to vehicle faults and robustness to noises. Vehicle tyre and spring faults can be easily discriminated. Results of simulation and experimental investigation on a model vehicle are given.
Adaptive Fault Feature Extraction Based on Stationary Wavelet Packet Decomposition and Hilbert Transform

Yihua Liu,Yuanyuan Wang,Zhihuan Song

DOI: https://doi.org/10.3321/j.issn:1000-6753.2009.02.023

2009-01-01

Abstract:A fault detection algorithm is proposed to adaptively extract the characteristic component of fault signals in this paper. The algorithm used one-level stationary wavelet packet transform to decompose the signal into low- and high-frequency subbands, whose instantaneous frequency and instantaneous amplitude are calculated by Hilbert transform at the same time. Based on the preset rules of component extraction and signal decomposition, the algorithm adaptively selects the path of stationary wavelet packet decomposition, building the wavelet packet decomposition tree of the signal with a multiresolution spectral analysis. Thus the algorithm denoiseds the signal and extracts the characteristic components for fault detection. The simulation show that the algorithm provides sufficient frequency-amplitude fault information with the less computational workloads and data storage spaces. The algorithm also has a good anti-noise performance.
Wavelet-transformation-based advanced state chi-square test method and its application

Yao Zhang,LIU Ying-ying,ZHOU Jun

DOI: https://doi.org/10.3969/j.issn.1005-6734.2013.01.031

2013-01-01

Abstract:In view of the problem that traditional state chi-square test can't accurately determine the fault duration in soft fault detection, an improved state chi-square test method based on wavelet-transform was presented. Firstly, the signal jumping point was identified by using the decay speed of wavelet transform modulus maxima on the different scales. Then, the detection results were feedback to the Kalman filter. By introducing state correction term to correct the state error, the soft fault duration can be determined by the curve of fault detection. The simulation results show that the proposed method solve the problem of soft fault duration, and greatly improve the accuracy of fault detection.
Fault Detection in Power System Based on Wavelet Analysis

彭秀艳,于秀萍,王显峰

DOI: https://doi.org/10.3969/j.issn.1009-671x.2004.02.019

2004-01-01

Abstract:The precise fault detection of the power system has great significance for the quality of electric energy.The analysis and distinguishment methods were proposed for the power system fault signal with wavelet transformation fast algorithm.The simulation result indicates that it is very accurate and fast, and can satisfy the real-time requirements for the project.
Fault Detection Based on Orthonormal Wavelet Transform of System Impulse Response

Ye Hao,Wang Gui-zeng,Fang Chongzhi

DOI: https://doi.org/10.1016/S1474-6670(17)42993-4

1998-01-01

Abstract:A new fault detection method based on the coefficients of the orthonormal wavelet transform of system impulse response is proposed in this paper. It needs no model of the monitored system, requires only small amount of computation, and has very simple fault decision process.
An Application of Wavelet Packet Scalogram in Fault Detection

LIU Chong-chun,QIU Zheng-ding

DOI: https://doi.org/10.3969/j.issn.1000-9965.2000.03.009

2000-01-01

Abstract:A fault diagnosis method according to wavelet packet scalogram is proposed. It decomposes signals in different bands by using compactly Daubechies wavelet packet bases. Then calculating the percentage of scalogram of each wavelet packet subspace contained in the whole scalogram, and further it can detect the fault frequency. It has been shown that, this method can be successfully applied to machine axes fault diagnosis.[
Investigation of Aeroengine Fault Diagnosis Based on Discrete Wavelet Transform

Ma Tingting,Guo Yingqing

DOI: https://doi.org/10.16526/j.cnki.11-4762/tp.2010.02.014

2010-01-01

Abstract:This paper describes a novel approach based upon discrete wavelet transform for fault detection of aeroengine.By the use of discrete wavelet transform that well localize the characterization of signal both in time and frequency domains,the occurring instants of abnormal status of a sensor in its output signal can be identified.We mainly study aeroengine sensor fault diagnosis based on discrete wavelet transform.According to the decomposition and reconstruction of discrete wavelet coefficients of input and output,we can locate the singularity of signals.And then,by deducting the extreme points corresponding to the input signal,we can detect the sensor fault.It indicates that aeroengine sensor faults can be detected accurately and promptly using this method through a large number of simulations in Matlab.
Bearing Fault Detection Via Wavelet Packet Transform and Rough Set Theory

Cheng Li,Zhihuan Song,Ping Li

DOI: https://doi.org/10.1109/wcica.2004.1340953

2004-01-01

Abstract:A novel method for bearing fault detection through the sound signal translated from the vibration signal is introduced. The wavelet packet transform is used to preprocess the signal, then the computed wavelet coefficients are divided into clusters accordingly, important frequency ranges have a larger number of clusters than less important frequency ranges. These clusters extract the time-frequency information to get the fault characteristic of the bearing. In order to identify the fault, the method based on rough set theory is adopted. The result from experience proves that fault types can be identified and diagnosed by the above method. Furthermore, it attains nearly the same accuracy, compared with artificial neural network.
Application of Wavelet Transform in Fault Diagnosis to Indicate the Singularity of Signal

Kai Huang

2005-01-01

Abstract:In industrial automatically controlled system, fault signal is often paroxysmal. Wavelet transform is a new time and frequency domain analysis method, by using it , we can easily figure out the singularity of indeterminacy, at the same time fault information will acquired. It is approved that wavelet transform is superiority in fault diagnosis.
Application of wavelet transform for early-stage damage detection

GAO Shun-de,TANG Yong-gang,WANG Xin

DOI: https://doi.org/10.3969/j.issn.1672-5581.2007.04.015

2007-01-01

Abstract:In this paper,the wavelet transform technique is employed for early-stage damage detection.Accordingly, the wavelet theory is first summarized,and the wavelet transform is then validated to detect structural damage via simulation testing.Subsequently,the damage can be positioned based on the maximal modulus regarding continuous wavelet transform (CWT) coefficient or detailed signal regarding discrete wavelet transform (DWT),i.e.the static or dynamic singularity.In this method,either static or dynamic response signal from damaged structure,rather than undamaged structure,is required for this purpose.Through instantaneous and dynamic signal sampling,this method is used for the finite element (FE) modeling of cracked cantilever to accurately detect the cracking position and quantity.Compared with the traditional methods,this approach possesses feasible,economic and precise strengths.Consequently,the proposed wavelet transform method is proven effective for early-stage structural damage detection.
A Wavelet-Based Approach to Abrupt Fault Detection and Diagnosis of Sensors

JQ Zhang,Y Yan

DOI: https://doi.org/10.1109/19.963215

IF: 5.6

2001-01-01

IEEE Transactions on Instrumentation and Measurement

Abstract:This paper describes a novel wavelet-based approach to the abrupt fault detection and diagnosis of sensors. By the use of wavelet transforms that accurately localize the characteristics of a signal both in the time and frequency domains, the occurring instants of abnormal status of a sensor in the output signal can be identified by the multiscale representation of the signal. Once the instants are detected, the distribution differences of the signal energy on all decomposed wavelet scales of the signal before and after the instants are used to claim and classify the sensor faults. Synthetic data simulated by means of a computer using real-word data from a general-purpose pressure sensor have verified the effectiveness of the proposed method.
Integrated design approach of fault detection systems based on wavelet transform

Hao Ye,Steven Ding,Guangming Wang

DOI: https://doi.org/10.1109/ACC.2001.945988

2001-01-01

Abstract:Problems related to the integrated design of robust fault detection (FD) systems are studied. Firstly, a problem of the 2-norm based approaches is discussed, i.e. due to the necessary length of the time window introduced to realize the 2-norm based residual evaluation function of a FD system, the expected optimal performance of the FD system may not be achieved when the system is realized in real applications. Then a new kind of evaluation function based on the absolute value of the wavelet transform (WT) of the residual signal and the corresponding integrated design approach for the FD systems are proposed. Different from the usual 2-norm based approaches whose mathematical basis is the relationship between the whole energy of the output and input signal of a dynamic system, a relationship between the instant power of the WT of the output signal and the energy of the past input signal of a dynamic system is established and further used for the FD system design. It solves the problem in the 2-norm based method, and the resulting FD system is easy to implement, and can detect faults very rapidly with a low miss detection ratio
Fault feature extracting by wavelet transform for control system fault detection and diagnosis

Ren, Z.,Jie Chen,Xiaojing Tang,Weisheng Yan

DOI: https://doi.org/10.1109/CCA.2000.897471

2000-01-01

Abstract:The paper deals with the problem of fault feature extraction from the residual in the model-based control system fault detection and diagnosis, based on the fact that the wavelet transform of a signal will maximise the modulus at its singular point in the transform domain, and the fault error has positive singularity exponent while the noise has negative singularity exponent at the corresponding singular points; the fault error and noise mixed in the residual can be separated from each other by multi-scale wavelet transform, and the modulus maximum can be taken as the fault feature, so that the fault feature becomes clearer and more recognizable and a correct decision as to whether the system fault will take place or not can be correctly made in the transform domain. This makes it easy to detect and diagnose faults in the control system
Fault detection of a precision test turntable's angular measuring system based on wavelet transform

ZHAO Bai-ting,CHEN Xi-jun,ZENG Qing-shuang

DOI: https://doi.org/10.3969/j.issn.1005-6734.2007.05.028

2007-01-01

Abstract:A new method based on discrete wavelet transformation was presented for fault feature extraction of the precision test turntable’s angular measuring system.This method separates the original signals into approximate signals and detail signals by using the wavelet function of db4.The fault points of discontinuity and saturation can be located with the first-level detail signals.By multiple-level decomposition,we can get maximum value of approximate signals and detail signals.The fault of high frequency disturbance can be located by SNR.The experiment results show the method is practical and effective in detecting the faults,and can increase the turntable’s security and reliability.
Wavelet analysis for the fault detection in electrical connectors

Zhang Hao,Gao Jinchun,Yu Cuiping,Chen Chen

DOI: https://doi.org/10.1049/cp.2012.0665

2012-01-01

Abstract:Dust particle contamination is generally recognized as one of the major inducement to the electrical connector failure in communication systems. Contamination within the connector may affect the signals which is transporting through and turn it to be some fault signals. Wavelet Transform is proved to be a great detector and has been widely applied in power systems. However, relatively little work has been focused on its application in the electrical connectors in telecommunication systems. In this work, the detection of fault signal was studied by using wavelet transform method. A series of experiments were conducted to observe the resulted influences on the contaminated connector. An algorithm based on the wavelet theory was developed to detect the fault signals. Corresponding simulations utilizing MATLAB were performed to test and validate the algorithm.
Adaptive Harmonic Wavelet Packet Transform and Its Application to Machine Fault Diagnosis

Shengchun Wang,Jie Han,Zhinong Li,Jianfeng Li

DOI: https://doi.org/10.3969/j.issn.1000-1298.2007.10.042

2007-01-01

Abstract:Combined harmonic wavelet packet with matching pursuit, an adaptive decomposing method was presented. In the proposed method, the time-frequency atoms could be adaptively selected from the harmonic wavelet packet dictionary. Non-stationary signal could be decomposed into a number of independent frequency sub-bands and the frequency overlapping and leakage was avoided. The proposed algorithm is simple and has good resolution. The simulation results showed that the proposed approach is superior to the wavelet packet transform and matching pursuit based on wavelet packet. At last, the proposed method has been applied to the fault diagnosis of bearing and rotor system, the experiment result showed the proposed method is effective.
Application Of Wavelet Transform To Defect Detection. Of Wheelflats Of Railway Wheels

Jh Yue,Zd Qiu,Bs Chen

DOI: https://doi.org/10.1109/ICOSP.2002.1180975

2002-01-01

Abstract:Continuous wavelet transform is applied to vibration signal analysis of railway wheels to detect the meshing abnormality of wheels with tread defects. According to the analysis of experimental data, the results show that the method can be applied to wheelflats detection of railway wheels successfully.

Application of wavelet transform to fault detection

Power System Fault Detection Based on Stationary Wavelet Packet Transform and Hilbert Transform

Fault Detection in Dynamic Systems Based on Wavelet Transform

Wavelet Fault Detection Based on Filtering Pretreatment

Application of Wavelet Transform to Fault Diagnosis in Long Vehicle

Adaptive Fault Feature Extraction Based on Stationary Wavelet Packet Decomposition and Hilbert Transform

Wavelet-transformation-based advanced state chi-square test method and its application

Fault Detection in Power System Based on Wavelet Analysis

Fault Detection Based on Orthonormal Wavelet Transform of System Impulse Response

An Application of Wavelet Packet Scalogram in Fault Detection

Investigation of Aeroengine Fault Diagnosis Based on Discrete Wavelet Transform

Bearing Fault Detection Via Wavelet Packet Transform and Rough Set Theory

Application of Wavelet Transform in Fault Diagnosis to Indicate the Singularity of Signal

Application of wavelet transform for early-stage damage detection

A Wavelet-Based Approach to Abrupt Fault Detection and Diagnosis of Sensors

Integrated design approach of fault detection systems based on wavelet transform

Fault feature extracting by wavelet transform for control system fault detection and diagnosis

Fault detection of a precision test turntable's angular measuring system based on wavelet transform

Wavelet analysis for the fault detection in electrical connectors

Adaptive Harmonic Wavelet Packet Transform and Its Application to Machine Fault Diagnosis

Application Of Wavelet Transform To Defect Detection. Of Wheelflats Of Railway Wheels