[The Raman Scatting of Carbon Nanotubes].

F Li,J Zuo,B Lu,Z Chen,J Lu,Y Jia,G Zhou

1997-01-01

Abstract:Raman scattering measurements of the cathode deposite produced by carbon arc discharge method and graphite was repotred. The results indicate that the inner core of the deposite containing large quantities of carbon nanotubes undergoing crystallization process. Carbon nanotube is one kind of micro-crystal of quasi-graphite.

What problem does this paper attempt to address?

The study of field emission properties of an individual carbon nanotube

Di KONG,Jian-zhou LI,Hao ZHANG,Chang CHEN

DOI: https://doi.org/10.3969/j.issn.1674-6236.2014.12.045

2014-01-01

Abstract:The field emission properties of carbon nanotubes are excellent, therefore they are a promising source of electron emission. The emission mechanism of nano-materials are explored in this paper, the electromagnetic software CST is used for building simulation models, and appropriate simulation environment is developed according to the specific structural characteristics of the carbon nanotubes. The simulation results are of great importance to the study of using carbon nanotube array as field emission cathode microwave tube.
Morphology of Carbon Nanotubes Prepared by Carbon Arc

XL Zhao,M Wang,M Ohkohchi,Y Ando

DOI: https://doi.org/10.1143/jjap.35.4451

IF: 1.5

1996-01-01

Japanese Journal of Applied Physics

Abstract:Carbon nanotubes were obtained as deposits on the cathode of carbon arc in He and CH4 gases. The morphology of carbon nanotubes was observed by scanning electron microscopy of the top surface of the cathode deposit, and was found to change with evaporation conditions. The variation of carbon nanotube morphology was more marked for the case of evaporation in CH4 gas than that in He gas. Thick carbon nanotubes embellished with a number of nanoparticles were obtained on the cathode of carbon arc under the conditions of high CH4 gas pressure and high dc arc current.
Carbon Nanotubes Grown on the Surface of Cathode Deposit by Arc Discharge

M Wang,XL Zhao,M Ohkohchi,Y Ando

DOI: https://doi.org/10.1080/10641229608001160

1996-01-01

Fullerene Science and Technology

Abstract:Carbon nanotubes prepared by dc arc discharge of graphite electrodes in He and CH4 gas took markedly different morphology. Thick nanotubes embellished with many carbon nanoparticles were obtained by evaporation under high CH4 gas pressure and high arc current. Thin and long carbon nanotubes were obtained under a CH4 gas pressure of 50Torr and an arc current of 20A for the anode with a diameter of 6mm.
Synthesis Of Large Quantity Single-Walled Carbon Nanotubes By Arc Discharge

Zh Li,M Wang,Xq Wang,Hb Zhu,Hm Lu,Y Ando

DOI: https://doi.org/10.1088/0256-307x/19/1/328

2002-01-01

Chinese Physics Letters

Abstract:We report on a new method to prepare large quantity single-walled carbon nanotubes (SWCNTs) with high purity. Using a Y-Ni powder composite graphite rod as an anode, at a given angle with the high-purity graphite cathode rod, a cloth-like deposit can be obtained by dc arc discharge in helium at high temperature, which contains about 60% SWCNTs. In this way, we can obtain a deposit of more than one gram in ten minutes. Transmission electron microscopy and Raman scattering have been used to observe the structure and morphology of the SWCNTs.
Raman Characterization for the Carbon Nanotubes Synthesis: Defects Determination, Product Thermal Treatment,Process Analysis and Catalyst Design

QIAN Wei-zhong,YU Jian-yuan,CHENG Feng-en,WEI Fei,WANG Yao,YU Hao,NING Guo-qing,LUO Guo-hua

DOI: https://doi.org/10.3969/j.issn.1004-5929.2005.01.005

2005-01-01

Abstract:Raman scattering technique is used to study the carbon nanotube synthesis system. It is found that it not only favors the determination of the characteristics of carbon materials itself, but also is effective to analyze the growth process of multiwalled and single walled carbon nanotubes in macroscopic scale. And consequently the rational catalyst and reactor design and the proper process control method are proposed, considering the differences in the growth of different nanometer carbon materials. Meanwhile, a method for the quantitative determination of the purity of single walled carbon nanotubes is proposed based on the Raman scattering technique.
Morphologies and Microstructures of Carbon Nanotubes Prepared by Self-Sustained Arc Discharging

DS Tang,WY Zhou,LJ Ci,XQ Yan,HJ Yuan,ZP Zhou,YX Liang,DF Liu,W Liu

DOI: https://doi.org/10.1088/1009-1963/11/5/316

2002-01-01

Chinese Physics

Abstract:We have investigated the morphology and microstructure of carbon nanotubes and nanoparticles in cathode deposits prepared by self-sustained arc discharge.Scanning electron microscopy images indicate that there are two regions exhibiting different morphologies on the top surface of the cathode deposits.In the central region,there is a triangular pattern of spots with a diameter up to 100μm,which consists of carbon nanotubes and nanoparticles.In the fringe region,carbon nanotubes and nanoparticles are distributed randomly.In addition,carbon nanotubes in the central region have a larger inner diameter,compared with those in the fringe region.The outer diameter distribution of tubes in the central region is narrower than that of tubes in the fringe region,while the former has a smaller peak value than the latter.For the nanoparticles,they exhibit a different behaviour from the tubes existing in the same region.The difference between the microstructure of tubes or particles in the two regions is attributed to the different temperatures and temperature gradients during their formation.
Raman spectroscopy and field emission measurements on catalytically grown carbon nanotubes

Christian Klinke,Ralph Kurt,Jean-Marc Bonard,Klaus Kern

DOI: https://doi.org/10.48550/arXiv.cond-mat/0508657

2005-08-27

Materials Science

Abstract:We used microcontact printing to pattern a silicon surface with an iron-containing catalytic solution. Multi-wall carbon nanotubes were subsequently grown on the patterned areas by chemical vapor deposition at temperatures between 650 and 1000C. We demonstrate that the diameter of the catalytically grown multi-wall nanotubes increases with the deposition temperature. Raman spectroscopy has been used to investigate the crystalline character of the obtained structures and it is found that the fraction of the nano-crystalline shell increases with the temperatures. The measurement of the field emission properties shows a correlation between the tube diameter and the emission field values.
Preparation of Large Amounts of Carbon Nanotubes in Hydrogen Atmosphere by Arc-Discharge

M Wang,ZH Li,Y Lu,XH Chen,ZC Chen,ZF Qi,WZ Li

DOI: https://doi.org/10.7498/aps.49.1106

IF: 0.906

2000-01-01

Acta Physica Sinica

Abstract:Making use of graphite as electrode,we have prepared carbon nanotubes by the direct current arc-discharge method.The experimental results indicate that the carbon nanotubes are generated on the front-end surface and within the carbon accretion on the cathode.Using SEM adn TEM,we find no significant difference for the shapes and the structures of the generated carbon nanotubes when the pressure and the direct arc-current change.Under the pressure of hydrogen gas 11999Pa and direct arc-current 60A,we obtain a large number of straight and long carbon nanotubes with uniform calibers.
Field emission from Nanocomposite Carbon

g a j amaratunga,i alexandrou,n l rupesinghe,m chhowalla,christopher j kiely

DOI: https://doi.org/10.1007/978-94-010-0858-7_15

2001-01-01

Abstract:A carbon arc with a local N2 gas jet is used to deposit a new form of nanocomposite carbon films. The films are comprised of a semiconducting carbon matrix with nanoscale graphitic particles embedded within it. These nanoscale particles have a closed form structure similar to short carbon nanotubes. The field emission properties of these films are reported. A threshold electric field of 3.8 V/μm at 1 nA are measured. After a short wet etch, the measured threshold field reduces to 2.6 V/μm. The emission characteristics of the etched nanocomposite films are very close to those of films made up from randomly oriented nanotubes obtained by drying of a suspension. The unetched nanocomposite films give a more stable emission characteristic. A model which involves emission of electrons from subsurface nanoparticles into the semiconducting a-C matrix, and emission from a-C into vacuum is proposed. This type of film combines the advantages of carbon nanotube field emission with those of plasma based thin film deposition technology. There is a small lowering of the emission current, but the emission stability is greatly improved.
[Raman Scattering of Single-Wall Carbon Nanotubes Produced Using Y/Ni Catalyst].

YF Wang,HR Liu,XX Xu,Y Shao,XW Cao,SF Hu,YY Liu,GX Lan

DOI: https://doi.org/10.3321/j.issn:1000-0593.2002.04.016

2002-01-01

Abstract:Single wall carbon nanotubes (SWNTs) were synthesized by electric are discharge method with a mixture of nickel and yttrium as catalysts. The examination results of scanning electronic microscope and transmission electronic microscope indicate that the yield of SWNTs in the sample were high. SWNTs have been investigated by Raman scattering techniques with excitation wavelengths in the range of 514.5 to 782.0 nm. We have observed some differences in the frequencies and intensities of the radial breathing modes. The electronic density of states of SWNTs was calculated using the Brillouin zone folding. A graphical method was proposed for assigning Raman peaks of the radial breathing modes (RMB) based on the data of diameters, RBM frequencies and electronic density of states of SWNTs. The radial breathing modes on SWNTs are assigned. The results indicate that the diameter distribution of SWNTs is in the range of 0.79-1.76 nm, and the SWNTs with diameter 1.45 nm are in the majority. The metallic and semiconductor tubes are all present in the sample.
Abnormal Anti-Stokes Raman Scattering Of Carbon Nanotubes

Shu-Lin Zhang,Xinhua Hu,Hongdong Li,Zujin Shi,Kwok Yue,Jian Zi,Zhennan Gu,Xiaohua Wu,Zilong Lian,Yong Zhan,Fumin Huang,Lixia Zhou,Yaogang Zhang,Sumio Iijima

DOI: https://doi.org/10.1103/PhysRevB.66.035413

IF: 3.7

2002-01-01

Physical Review B

Abstract:Abnormal anti-Stokes Raman scattering (AASR) was unambiguously observed in carbon nanotubes (CNT's). In contrast to traditional Raman scattering theory, the absolute value of the Raman frequency of the anti-Stokes peak is not the same as that of the corresponding Stokes peak. It was demonstrated that AASR scattering originates from the unique nanoscale cylindrical structure of CNT's that can be considered naturally as a graphite structure with an intrinsic defect from its rolling. The double-resonance Raman scattering theory was applied to interpret the scattering mechanism of the AASR phenomenon successfully and quantitatively.
Comparative Raman Study of Carbon Nanotubes Prepared by D.C. Arc Discharge and Catalytic Methods

PH Tan,SL Zhang,KT Yue,FM Huang,ZJ Shi,XH Zhou,ZN Gu

DOI: https://doi.org/10.1002/(sici)1097-4555(199705)28:5<369::aid-jrs107>3.0.co;2-x

IF: 2.727

1997-01-01

Journal of Raman Spectroscopy

Abstract:The Raman spectra of carbon nanotubes prepared by catalytic (C-CNT) and d.c. arc discharge (D-CNT) methods are reported. A previously unnoticed third-order Raman peak at ca. 4248 cm-1 was observed in the Raman spectrum of D-CNT. The Raman features of D-CNT and C-CNT are similar to those of highly oriented pyrolytic graphite (HOPG) and active carbon, respectively. The data also suggest that the increase in disorder in D-CNT compared with HOPG is due to structural defects in D-CNT. © 1997 by John Wiley & Sons, Ltd.
Carbon Nanotube Fibers: Monitoring a Micromechanical Process in Macroscale Carbon Nanotube Films and Fibers (adv. Mater. 5/2009)

Wenjun Ma,Luqi Liu,Rong Yang,Taihua Zhang,Zhong Zhang,Li Song,Yan Ren,Jun Shen,Zhiqiang Niu,Weiya Zhou,Sishen Xie

DOI: https://doi.org/10.1002/adma.200990014

IF: 29.4

2009-01-01

Advanced Materials

Abstract:The evaluation of mechanical properties of carbon nanotube (CNT) fibers is inherently difficult. On p. 603, Sishen Xie and co-workers report that Raman scattering—a generic methodology independent of mechanical measurements—can be used to determine the interbundle strength and microscopic failure process for various CNT macroarchitectures. Raman data are used to predict the moduli of CNT films and fibers, and to illustrate the influences of the twisting geometries on the fibers' mechanical performances.
Raman Spectra Of Nanocrystalline Carbon Nitride Synthesized On Cobalt-Covered Substrate By Nitrogen-Atom-Beam-Assisted Pulsed Laser Ablation

Ning Xu,Fuming Cui,Hao Lin,Zhifeng Ying,Jiada Wu,Yuancheng Du,Fuming Li

DOI: https://doi.org/10.1063/1.1483914

IF: 2.877

2002-01-01

Journal of Applied Physics

Abstract:Nanocrystalline carbon nitride films were synthesized on cobalt-covered Si(111) wafers using a nitrogen-atom-beam-assisted pulsed laser ablation method. Raman spectroscopy and other analyses showed that as-synthesized films were constructed primarily from nanometer-sized beta-C3N4 and CNx crystallites. Catalyzation by the cobalt in the synthesis process is considered to play an important role in the formation of nanocrystalline beta-C3N4. The effect of the experimental conditions on the characters of the as-synthesized films has been discussed. (C) 2002 American Institute of Physics.
Complex structure of the carbon arc discharge for synthesis of nanotubes

V Vekselman,M Feurer,T Huang,B Stratton,Y Raitses

DOI: https://doi.org/10.1088/1361-6595/aa7158

2017-06-06

Plasma Sources Science and Technology

Abstract:Comprehensive non-invasive spectroscopic techniques and electrical measurements of the carbon arc revealed two distinguishable plasma synthesis regions in the radial direction normal to the arc axis. These regions, which are defined as the arc core and the arc periphery, are shown to have very different compositions of carbon species with different densities and temperatures. The colder arc periphery is dominated by carbon diatomic molecules (C2), which are in the minority in the composition of the hot arc core. These differences are due to a highly non-uniform distribution of the arc current, which is mainly conducted through the arc core populated with carbon atoms and ions. Therefore, the ablation of the graphite anode is governed by the arc core, while the formation of carbon molecules occurs in the colder arc periphery. This result is consistent with previous predictions that the plasma environment in the arc periphery is suitable for synthesis of carbon nanotubes.

physics, fluids & plasmas
Properties of Carbon Nanotube Field Emission

陈绍凤,夏善红,宋青林,胡平安,刘云圻,朱道本

DOI: https://doi.org/10.3969/j.issn.1674-4926.2003.z1.037

2003-01-01

Chinese Journal of Semiconductors

Abstract:Carbon nanotube has its advantages as a cathode material for field emission. Good adhesion between the carbon nanotubes and the substrate is obtained by thermal treatment. Testing curves are obtained by measuring the properties of field emission . In addition, the experimental results are analysed, and methods for improving uniformity of the carbon nanotubes are reported.
Observation of Lamellar Like Fringes and Barkhausen Effects in Iron-Carbon Filled Vertically Aligned Carbon Nanotubes

Ayoub Taallah,Maureen Willis,Jian Guo,JiaChen Xia,Mu Lan,Sijie Zhang,Shanling Wang,Yi He,Gang Xiang,Filippo S. Boi

DOI: https://doi.org/10.1063/1.5074117

IF: 2.877

2018-01-01

Journal of Applied Physics

Abstract:Observations of lamellar like fringes in iron-carbon-filled vertically aligned carbon nanotubes (CNTs) produced by pyrolysis of ferrocene and rapid cooling methodologies (controlled quenching) have been investigated. The quantitative phase analysis of encapsulated Fe3C, γ-Fe, and α-Fe by X-ray diffraction reveals that controlling the phase-percentage leads to control of the crystal habit and of magnetic properties. Large coercivities and variable saturation magnetizations were observed. In addition, we reported a thorough study of the hysteresis behavior, the Barkhausen effect which has to be possibly associated with the formation of interfacial-defects in the crystal areas in contact with CNT layers.
Carbon Nanotube As the Core of Conical Carbon Fiber: Fabrication, Characterization and Field Emission Property

W. Zhang,Z.H. Xi,G.M. Zhang,S. Wang,M.S. Wang,J.Y. Wang,Z.Q. Xue

DOI: https://doi.org/10.1007/s00339-006-3764-0

2006-01-01

Applied Physics A

Abstract:Conical carbon fibers (CCFs) with carbon nanotubes (CNTs) as their cores were grown on graphite substrates with a chemical vapor deposition method. The CNT-cored CCFs were about several tens of micrometers in length. In the interaction with a probe system, the CNT core filaments demonstrated good mechanical strength. Furthermore, field emission currents around 100 μA were also attained from individual CNTs. The growth mechanism of this CNT/CCF combined structure is briefly discussed. Our method has provided a convenient and inexpensive approach to mass assembling CNTs to a carbon substrate.
Confocal Raman spectromicroscopy for tin-core/carbon-shell nanowire heterostructure

Fengping Wang,Ruying Li,Xueliang Sun,Zhifeng Ding

DOI: https://doi.org/10.1016/j.apsusc.2011.09.009

IF: 6.7

2011-01-01

Applied Surface Science

Abstract:High density heterostructures of carbon nanotubes encapsulated single crystalline tin nanowires have been characterized by Raman spectromicroscopy. The morphology, composition and structure of the synthesized nanoheterostructures were examined by using scanning electron microscopy, transmission electron microscopy. The Raman spectra obviously manifest the crystalline nano-graphite within amorphous carbon walls in the heterostructures. The Raman image reproduces the pristine heterostructures of the CNTs as seen in SEM image, which illustrate the single nanowires oriented uniformly grown on micro-graphitic fibers. It was found that the resultant heterostructures are luminescent which was attributed to crystalline nano-graphite embedded in the amorphous carbon matrix, which is a consequence of excitons localization within an increasing number of sp 2 rich clusters. The contrast in the Raman image reflects nonuniform distribution of the graphite cluster size which acts as the radiative centers. The luminescent property was reviewed. The enhanced Raman spectra and luminescent property by the well-defined tin nanowires inside the heterostructures was revealed. © 2011 Elsevier B.V. All rights reserved.
High-resolution Near-Field Raman Microscopy of Single-Walled Carbon Nanotubes.

A Hartschuh,EJ Sanchez,XS Xie,L Novotny

DOI: https://doi.org/10.1103/physrevlett.90.095503

IF: 8.6

2003-01-01

Physical Review Letters

Abstract:We present near-field Raman spectroscopy and imaging of single isolated single-walled carbon nanotubes with a spatial resolution of approximately 25 nm. The near-field origin of the image contrast is confirmed by the measured dependence of the Raman scattering signal on tip-sample distance and the unique polarization properties. The method is used to study local variations in the Raman spectrum along a single single-walled carbon nanotube.

[The Raman Scatting of Carbon Nanotubes].

The study of field emission properties of an individual carbon nanotube

Morphology of Carbon Nanotubes Prepared by Carbon Arc

Carbon Nanotubes Grown on the Surface of Cathode Deposit by Arc Discharge

Synthesis Of Large Quantity Single-Walled Carbon Nanotubes By Arc Discharge

Raman Characterization for the Carbon Nanotubes Synthesis: Defects Determination, Product Thermal Treatment,Process Analysis and Catalyst Design

Morphologies and Microstructures of Carbon Nanotubes Prepared by Self-Sustained Arc Discharging

Raman spectroscopy and field emission measurements on catalytically grown carbon nanotubes

Preparation of Large Amounts of Carbon Nanotubes in Hydrogen Atmosphere by Arc-Discharge

Field emission from Nanocomposite Carbon

[Raman Scattering of Single-Wall Carbon Nanotubes Produced Using Y/Ni Catalyst].

Abnormal Anti-Stokes Raman Scattering Of Carbon Nanotubes

Comparative Raman Study of Carbon Nanotubes Prepared by D.C. Arc Discharge and Catalytic Methods

Carbon Nanotube Fibers: Monitoring a Micromechanical Process in Macroscale Carbon Nanotube Films and Fibers (adv. Mater. 5/2009)

Raman Spectra Of Nanocrystalline Carbon Nitride Synthesized On Cobalt-Covered Substrate By Nitrogen-Atom-Beam-Assisted Pulsed Laser Ablation

Complex structure of the carbon arc discharge for synthesis of nanotubes

Properties of Carbon Nanotube Field Emission

Observation of Lamellar Like Fringes and Barkhausen Effects in Iron-Carbon Filled Vertically Aligned Carbon Nanotubes

Carbon Nanotube As the Core of Conical Carbon Fiber: Fabrication, Characterization and Field Emission Property

Confocal Raman spectromicroscopy for tin-core/carbon-shell nanowire heterostructure

High-resolution Near-Field Raman Microscopy of Single-Walled Carbon Nanotubes.