Abstract:Direct numerical simulations are performed to investigate the flow around an inclined thin square plate with a chord length-thickness aspect ratio of L/td = 50. The plate is inclined around its axis of symmetry in two approaches, which are denoted as the IS (lines connecting the midpoints of opposite edges) and IL (diagonal lines) conditions, respectively. The inclination angle (α) is considered between 0° and 60°, where α = 0° refers to the condition that the flow is normal to the plate. The Reynolds number (Re) based on the equivalent diameter (ld = 4L2 cos α/π) is in the range of 50≤Re≤350. In the considered Re-α space, four flow regimes, namely, steady state, periodic state, quasi-periodic state, and chaotic state, are all observed under both the IS and IL conditions. The periodic state with a low frequency modulation is observed under the IS condition but occurs at higher Re beyond the considered range under the IL condition. Overall, the critical Reynolds numbers at different bifurcations under the IS condition are lower than those under the IL condition. Compared to the IS condition, the flow under the IL condition tends to lose symmetry more easily, even for some cases in the periodic state area at α≤15°. Furthermore, a detailed comparison suggests that the critical Reynolds numbers at different bifurcations for the square plate are generally higher than those for the circular disk.

Numerical study of turbulent flow around twin plate at large attack angle

Numerical study of flow past an axisymmetric body with a ring wing at various attack angles

Numerical Simulation of Separated Flows over Slender Body at High-Angle-of-attack with K-Ε Model Comforming Realizability

Study on Flow Field in an Elbow Draft Tube by 3D Numerical Simulation

Numerical Analysis of Turbulence Characteristics in a Flat-Plate Flow with Riblets Control

Numerical Study of an Oscillatory Turbulent Flow over A Flat Plate

Direct Numerical Simulations on the Flow Past a Thin Square Plate

Numerical analysis of turbulent forced convection and fluid flow past a triangular cylinder with control plate using standard $κ$-$ε$ model

Numerical Study of Flow Characteristics Behind a Stationary Circular Cylinder with a Flapping Plate

Numerical Study of the Flow and Heat Transfer of a Rectangular-tube Turbulent Impinging Jet Flow

Numerical Simulation of Flow Around Square Cylinder Using Different Low-Reynolds Number Turbulence Models

Numerical Simulation for Transonic Flows at High Incidence Around a Complete Fighter with Two-Equation K-G Model

Numerical Study on Flow and Heat Transfer Characteristics of 3D Turbulent Impinging Jets

Analysis of Turbulent Separated Flows for the NREL Airfoil Using Anisotropic Two-Equation Models at Higher Angles of Attack

Modelling Of Impinging Flow And Heat Transfer In A Confined Narrow Gap

Numerical Simulation of 3D Flow in a Turbine Cascade at Large Incidence

Assessment of Six Turbulence Models for Modeling and Predicting Narrow Passage Flows, Part 2: Pin Fin Arrays

Direct Numerical Simulations on the Flow Normal to a Plate with Transit Shape from Circular Disk to Triangle

The numerical simulation of separated flow at large attack angles for a wind turbine airfoil

Numerical Analysis of Flows Past Two Parallel Flat Plates in the Free-Molecular Regime

Numerical Study on Flow Structure Around Slender with Sharp Nose at Lower Incidences