Abstract:Numerical investigations of combined impingement and film cooling based on different turbulence models have been carried out and compared in the present study. The specific test case combines the complex flow physics of the jet impinging, turning and subsequent mixing with hot mainstream, which consists of jet shear layer separation, wall boundary layer transition, coolant jet detachment and reattachment. The turbulence models employed are the k  − standard, RNG, and realizable models, the k − standard, SST, and Transition SST models, and the t l k − k − model. Numerical tests have been performed at three representative blowing ratios from low to high for each turbulence model. The computed cooling effectiveness from  equation models tend to be underpredicted at low blowing ratio while numerical profiles of cooling effectiveness achieve considerable agreement with the measured experiment data at moderate and high blowing ratios. In addition, the computed results from  equation models reasonably match the measured data at low blowing ratio but cooling effectiveness are markedly underpredicted at moderate and high blowing ratios. In contrast, those results from the t l k − k − model agree fairly well with those of the experiment at various blowing ratios. Owing to the nature description of the pre-transitional streamwise fluctuations in the laminar kinetic energy, the solutions from t l k − k − model clearly reveal the complex flow physics in the combined impinging and film cooling in the confined region, where the jet shear layer separation, boundary layer transition, coolant detachment and reattachment co-exist. However, the large number of specified parameters in the t l k − k − model still needs to be further optimized to reach the enhanced agreement with experimental data and obtain extensive applications for combined cooling schemes.

Numerical Analysis of Flows Past Two Parallel Flat Plates in the Free-Molecular Regime

Numerical Study of Heat Flux Reduction Mechanism of the Counterflowing Jet in Rarefied Flows

Numerical Simulation of Gases over Flat Plate Using Two-Temperature Nonlinear Coupled Constitutive Relations

Numerical Analysis of the Micro-Couette Flow Using a Non-Newton–fourier Model with Enhanced Wall Boundary Conditions

Numerical Study of Multi-Plates Separating Flow and Characteristics

A Parallel Fictitious Domain Method for the Interface-Resolved Simulation of Particle-Laden Flows and Its Application to the Turbulent Channel Flow

Numerical Analysis of the Laminar Heat Transfer and Flow Situation Around a Square Rod Spacer in a Flow Passage.

A Three-Dimensional Fictitious Domain Method for Direct Numerical Simulations of Particle-Laden Flows with Heat Transfer

Hypersonic flow and heat transfer of a micro-rough plate in the near-continuum regime

Numerical Simulation Of The Flows Over Two Tandem Cylinders By Lattice Boltzmann Method

Numerical simulation of the free surface flow passing two hydrofoils

Numerical Study Of The Unsteady Aerodynamics Of Freely Falling Plates

Effect of End Shape on Flow and Heat Transfer Characteristics of Two Parallel Plates

Numerical Simulation of Flow Past a Triangular Prism with Fluid–structure Interaction

Analytical and numerical approach for the analysis of heat transfer of squeezing flow between two parallel plates

Numerical Simulation of the Flow and Heat Transfer Characteristics of Sweeping and Direct Jets on a Flat Plate with Film Holes

A Finite Analytic Numerical Method in PDF Model for Two-phase Flows and Simulation of Wall Jet Loaded with Solid Particles

Numerical analysis of two-dimensional MHD flow and heat transfer of generalized Maxwell fluid through a rectangular pipe

Parametric optimization and case study of nanofluid flow between two parallel plates in the presence of Darcy Brinkman Forchheimer: Sensitivity analysis

Numerical Study of the Flow and Heat Transfer of a Rectangular-tube Turbulent Impinging Jet Flow

NUMERICAL INVESTIGATION OF DIFFERENT TURBULENCE MODELS APPLIED IN COMBINED IMPINGEMENT AND FILM COOLING