Abstract:Ventilated cavitating flows are investigated via direct numerical simulations, using a coupled level set and volume of fluid method to capture the interface between the air and water phases. A ventilated disk cavitator is used to create the cavity and is modelled by a sharp-interface immersed boundary method. The simulation data provide a comprehensive description of the two-phase flow and the air leakage and vortex shedding processes in the cavitating flow. The mean velocity of the air phase suggests the existence of three characteristic flow structures, namely the shear layer (SL), recirculating area (RA) and jet layer (JL). The turbulent kinetic energy (TKE) is concentrated in the JL in the closure region, and streamwise turbulent fluctuations dominate transverse fluctuations in both SL and JL. Budget analyses of the TKE show that the production term causes the TKE to increase in the SL due to the high velocity gradients, and decrease in the JL due to streamwise stretching effects. Air leakage and vortex shedding occur periodically in the closure region, and the one-to-one correspondence between these two processes is confirmed by the velocity and volume fluid spectra results, and the autocorrelation function of the air volume fraction. Moreover, the coherent flow structures are analysed using the spectral proper orthogonal decomposition method. We identify several fine coherent structures, including $SL_{KH}$ induced by the Kelvin–Helmholtz instability, $SL_{out}$ associated with large-scale vortex shedding, $SL_{in}$ associated with small-scale vortex shedding, and $SL_{r}$ associated with upstream turbulent convection. The present study complements previous research by providing detailed descriptions of the turbulent motions associated with the violent mixing of air and water, and the complex interactions between different characteristic structures in cavitating flows.

Numerical Study on Flow Structure Around Slender with Sharp Nose at Lower Incidences

Numerical Study of Flow Structure on Rotational Symmetrical Slender Bodies

Numerical Study on Flow Structure of a Shallow Laminar Round Jet

Numerical Computations of the Flow in A Finite Diverging Channel

Numerical Simulation for Effects of Mach and Reynolds Number on Flow over Medium Radius Leading Edge Delta Wing

Numerical Analysis of Low-Reynolds-number Flow over Airfoil

A Physical Model of Asymmetric Vortices Flow Structure in Regular State over Slender Body at High Angle of Attack

Numerical investigation on three-dimensional flow-field characteristics of propeller slipstream

Numerical Simulation Study on Asymmetry Detached Flow of a Slender Body at High Angles of Attack

Numerical investigation of the round jet in crossflow at high velocity ratios with special emphasis on the evolution of vortex structures

Experimental Study of Non-Stationarity in the Flow over Slender Body at High Angles of Attack

3-D Flow Characteristics Of Asymmetric Vortices Over An Ogive-Cylinder And Its Structural Model

Influence of Nose Bluntness on Behaviors of Multi-Asymmetric Vortices Flow over Slender Body

Aerodynamic Analysis and Design Numerical Simulation of the Vortex Flow over a Common Research Model with Flying-Wing Configuration

Numerical and Experimental Investigations of Bistable Flow over a Slender Body of Revolution

Numerical Simulation of Separated Flows over Slender Body at High-Angle-of-attack with K-Ε Model Comforming Realizability

Three Dimensional Numerical Simulation Of Flow Around Four Circular Cylinders In An In-Line Square Configuration

Symmetric Vortical Structure and Its Topological Stability

Development and Evolution of Flow over Three-Dimensional Cylinder

Simulation-based Study of Low-Reynolds-number Flow Around a Ventilated Cavity

Numerical Simulations of Steady Flow over a Circular Cylinder Near a Boundary