Abstract:Moisture transport as well as evaporation and condensation are key mechanisms in the energy management of many processes occurring in different porous media. The role of moisture varies significantly among several applications such as food drying, concrete heating, deep geological barriers, and smouldering combustion of wet fuels. Currently, there is a lack of numerical models able to accurately predict these processes within a complex porous matrix. A one-dimensional numerical model was developed to predict the transient and spatial movement of evaporative and condensation fronts in an air heated inert porous bed partially saturated with water. The results showed that by introducing simple calibration constants in the effective thermal properties, the model was able to accurately predict experimental results. The numerical results revealed that temperatures rapidly increase to boiling conditions because of vapour condensation. Moreover, the model identified that the temperature plateau occurred because all the available energy was used to evaporate water. Evaporative cooling was also predicted and showed a rapid temperature decrease when air was initiated. When the air supply was initiated along with the heater, evaporative cooling resulted in a temperature plateau lower than air-off conditions. This was caused because vapour was carried forward much faster by the forced air, resulting in lower condensation and consequently lower energy released. Overall, this work provides a valuable representation in space and time of the key moisture transport processes in the gas phase as well as key phase-change and heat transfer processes occurring in porous media.

Numerical simulation of the transport phenomena due to sudden heating in porous media

Investigation of the transient heat and mass transfer process in unsaturated porous media around a buried pipe

Numerical Simulation for Tortuosity of Porous Media

Numerical investigation of vapor–liquid heat and mass transfer in porous media

Numerical Simulation of the Melting of Solid Particles in Thermal Convection with a Modified Immersed Boundary Method

Numerical simulation of the freezing process of concrete

Numerical simulation of natural convective heat and mass transfer in porous media

Numerical Simulation of Fluid Flow and Heat Transfer Processes

Numerical Simulation and Verification of Water and Heat Transport in the Lateral Hyporheic Zone of River-Groundwater under Water Exchange Conditions

Numerical Simulation on Subcooled Pool Boiling

Simulation of gas flow and heat transfer in micro Poiseuille flow

Numerical model of multiphase percolation flow through porous media in the thermal recovery process and its application

Modeling and Numerical Investigation of Transient Two-Phase Flow with Liquid Phase Change in Porous Media

Reactive direct simulation Monte Carlo modeling of gas reactive transport in three dimensional porous fibrous media across rarefied to continuum regimes

Numerical Simulations of Heat Explosion With Convection In Porous Media

An effective thermal conductivity model for the three-phase porous media based on the numerical simulation

Numerical Modeling for Electrical Transport Properties of Saturated Porous Media with Lattice Gas Automation

Numerical simulation of temperature rise within hydrogen vehicle cylinder during refueling

Multiphase modelling of water evaporation and condensation in an air-heated porous medium

Numerical Simulation on the Shock Wave/Boundary Layer Interaction with Heating/Cooling Effect

Thermal Transport in Aquifer - a Nonlinear Three-dimensional Model and Its Application