Abstract:The increasing complexity of surface has put forward higher demands for CNC machining trajectory generation. The constant scallop height method has the disadvantage of point redundancy during trajectory discretization. Therefore, a non-redundant tool trajectory generation method for surface finish machining is put forward. The cutting row spacing is determined by the geodesic curvature according to scallop height and the convexity or concavity of the local surfaces. The adjacent cutter contact (CC) points with constant scallop height are expressed point by point from the present CC point. The redundant points are removed by maximizing each cutting step length through making the chord error equal to the machining allowable error. The dual NURBS ruled surface is constructed to realize smooth transition of the tool trajectories and tool axis vector. The prototype system taking ACIS R13 and HOOPS V11.0 as modeling kernel has been developed to verify the proposed method. The experiment results proved that the proposed method can realize non-redundant tool trajectory considering tool interference during surface finish machining.

Nurbs Based Polyhedra Rounding Method

NURBS based skinning rounding method

Geometric Subdivision Scheme for Curve Design

Non-redundant tool trajectory generation for surface finish machining based on geodesic curvature matching

NURBS curve fairing based on non-uniform B-spline wavelet decomposition

NURBS Surface Fairing Based on Non-uniform B-spline Multi-resolution Wavelet Decomposition

Equidistant Smoothing of Polyhedra with Arbitrary Topologies

Design Method and Numerical Control Machining Principle for an Arbitrary N-Polygon Noncircular Section

DEFORMING CONVEX HYPERSURFACES BY THE LINEAR COMBINATION OF THE MEAN CURVATURE AND THE N-TH ROOT OF THE GAUSS-KRONECKER CURVATURE

Blending Polyhedra with NURBS

A Novel Method for Uncertainty Evaluation of Roundness Errors Based on Geometrical Product Specification

Representing Quadric Surfaces Using NURBS Surfaces

Generalized NURBS Curves and Surfaces.

A Rational Extension of Piegl's Method for Filling N-Sided Holes

Watertight Trimmed NURBS

A Novel Method of Efficient Machining Error Compensation Based on Nurbs Surface Control Points Reconstruction

A New Nurbs Offset Curves And Surfaces Algorithm Based On Different Geometry Shape

G1 Continuous Approximate Curves on NURBS Surfaces

&Lt;title>unified Approach on NURBS Surface Shape Modification</title>

A new adaptive interpolation scheme of NURBS based on axis dynamics

Machined Nurbs Surface Description Using On-Machine Probing Data