Abstract:Proceedings of the Institution of Mechanical Engineers, Part B: Journal of Engineering Manufacture, Ahead of Print. Aluminum alloy rings are widely used in aerospace, energy, petrochemical, and equipment applications. The loss of roundness often occurs because of the weak rigidity and unstable plasticity of aluminum alloy rings. Therefore, an online measurement technique for the roundness of aluminum alloy rings is critical for ensuring the processing quality of aluminum alloy rings. In this paper, an online roundness measurement method based on the laser ranging principle and improved particle swarm optimization (IPSO) is proposed with the aid of the rotation of the ring during the rolling process. First, the distance from the outer surface of the ring to the laser rangefinder was measured using a triangular laser rangefinder with the help of the rotation of the ring in the rolling process. Second, the distance data were denoized using an improved Kalman filter algorithm to reduce the influence of random noise on the measurement results. Finally, the roundness and geometric center were evaluated using the IPSO algorithm combined with the minimum zone circle (MZC) method and compared with the results obtained using the standard particle swarm optimization (PSO) algorithm, genetic algorithm (GA), and least square (LS) algorithm. The experimental results show that the roundness measured by the IPSO algorithm is less than 0.06 mm, demonstrating better performance in the roundness evaluation. The measurement method for roundness proposed in this paper is suitable for the online evaluation of large aluminum alloy rings, avoiding the influence of ring size on roundness measurement.

A Novel Method for Uncertainty Evaluation of Roundness Errors Based on Geometrical Product Specification

Study on the Uncertainty of Straightness Errors Base on New Generation Geometrical Product Specification

Implementation Uncertainty Evaluation of Cylindricity Errors Based on Geometrical Product Specification (Gps)

Optimum Geometrical Arrangement of Workpiece in the Ultrasonic Vibration Shoe Center Less Grinding

Method for Cylindricity Errors Evaluation Using Particle Swarm Optimization Algorithm

Method for Measurement Uncertainty Evaluation of Cylindricity Error Based on Good Point Set

Uncertainty Evaluation and Optimization of INS Installation Measurement Using Monte Carlo Method

Parameter Optimization of Roundness Quality Control for Machined Parts Based on Grey relational Analysis

Study on Roundness Error Evaluation with Least-Squares Method Based on Nonlinear Optimization

A Stitching Linear-Scan Method for Roundness Measurement of Small Cylinders

Posture evaluation method for aircraft component based on hole feature

Study on the Measurement of Global Sizes of Cylindrical Parts Using Talyrond 585LT.

Optimization of 3D Tolerance Design Based on Cost–Quality–Sensitivity Analysis to the Deviation Domain

Research on Roundness Detection and Evaluation of Aluminum Hose Tail Based on Machine Vision

An Iterative Minimum Zone Algorithm for Assessing Cylindricity Deviation

Evaluation of roundness error using a new method based on a small displacement screw

Application of Monte Carlo Method in the Measurement Process Design According to Next Generation of Gps

Online measurement method for roundness of large aluminum alloy ring based on laser ranging principle

Robust optimization design for sealing performance of globe-cone joint considering manufacturing and assembly uncertainties

Roundness Evaluation Method Based on Error Transformation and Image Domain

Planar Straightness Error Evaluation Based on Particle Swarm Optimization