Generalized NURBS Curves and Surfaces.

Q Wang,W Hua,GQ Li,HJ Bao

DOI: https://doi.org/10.1109/gmap.2004.1290061

2004-01-01

Abstract:A representation, the generalized NURBS (G-NURBS), is proposed for modeling parametric curves and surfaces. G-NURBS provides a unified framework for traditional parametric curve and surface. G-NURBS surface based on arbitrary irregular mesh can represent closed surface or trimmed surface with only one surface patch.

What problem does this paper attempt to address?

Point-normal Subdivision Curves and Surfaces

Xunnian Yang

DOI: https://doi.org/10.1016/j.cagd.2023.102207

IF: 1.368

2023-01-01

Computer Aided Geometric Design

Abstract:This paper proposes to generalize linear subdivision schemes to nonlinear subdivision schemes for curve and surface modeling by refining vertex positions together with refinement of unit control normals at the vertices. For each round of subdivision, new control normals are obtained by projections of linearly subdivided normals onto unit circle or sphere while new vertex positions are obtained by updating linearly subdivided vertices along the directions of the newly subdivided normals. Particularly, the new position of each linearly subdivided vertex is computed by weighted average of end points of circular or helical arcs that interpolate the positions and normals at the old vertices at one ends and the newly subdivided normal at the other ends. The main features of the proposed subdivision schemes are three folds: (1) The point-normal (PN) subdivision schemes can reproduce circles, circular cylinders and spheres using control points and control normals; (2) PN subdivision schemes generalized from convergent linear subdivision schemes converge and can have the same smoothness orders as the linear schemes; (3) PN C2 subdivision schemes generalizing linear subdivision schemes that generate C2 subdivision surfaces with flat extraordinary points can generate visually C2 subdivision surfaces with non-flat extraordinary points. Experimental examples have been given to show the effectiveness of the proposed techniques for curve and surface modeling.
Matrix Weighted Rational Curves and Surfaces

Xunnian Yang

DOI: https://doi.org/10.1016/j.cagd.2015.11.005

IF: 1.368

2015-01-01

Computer Aided Geometric Design

Abstract:Rational curves and surfaces are powerful tools for shape representation and geometric modeling. However, the real weights are generally difficult to choose except for a few special cases such as representing conics. This paper presents an extension of rational curves and surfaces by replacing the real weights with matrices. The matrix weighted rational curves and surfaces have the same structures as the traditional rational curves and surfaces but the matrix weights can be defined in geometric ways. In particular, the weight matrices for the extended rational Bézier, NURBS or the generalized subdivision curves and surfaces are computed using the normal vectors specified at the control points. Similar to the effects of control points, the specified normals can be used to control the curve or the surface's shape efficiently. It is also shown that matrix weighted NURBS curves and surfaces can pass through their control points, thus curve or surface reconstruction by the extended NURBS model no longer needs solving any large system but just choosing control points and control normals from the input data.
Variational Surface Design under Normal Field Guidance

Weidong Wu,Xunnian Yang

DOI: https://doi.org/10.1016/j.jcde.2015.03.001

2015-01-01

Journal of Computational Design and Engineering

Abstract:This paper proposes a novel method for shape design of a Bezier surface with given boundary curves. The surface is defined as the minimizer of an extended membrane functional or an extended thin plate functional under the guidance of a specified normal field together with an initial prescribed surface. For given boundary curves and the guiding normal field, the free coefficients of a Bezier surface are obtained by solving a linear system. Unlike previous PDE based surface modeling techniques which construct surfaces just from boundaries, our proposed method can be used to generate smooth and fair surfaces that even follow a specified normal field. Several interesting examples are given to demonstrate the applications of the proposed method in geometric modeling.
G1 continuous approximate curves on NURBS surfaces

YangYi-Jun,ZengWei,YangCheng-Lei,MengXiang-Xu,YongJun-Hai,DengBailin

IF: 3.652

2012-01-01

Computer-Aided Design

Abstract:Curves on surfaces play an important role in computer aided geometric design. In this paper, we present a parabola approximation method based on the cubic reparameterization of rational Bezier surf...
Subdivision Algorithm and G1 Condition for C-Bézier Curves

樊建华,邬义杰,林兴

DOI: https://doi.org/10.3321/j.issn:1003-9775.2002.05.009

2002-01-01

Abstract:C-Bézier curves are an extension of cubic Bézier curves. In addition to having many properties that Bézier curves have, they have the adjustable shape parameter, α, and can represent arcs precisely. This paper presents the subdivision algorithm and G1 condition of C-Bézier curves based on the analysis of C-Bézier basis functions and terminal properties. The results have definite geometric meanings that are useful for the shape modification and representation of C-Bézier curves. The results can also be extended to surface modeling with C-Bézier.
Unified Representation of Curves and Surfaces

Aizeng Wang,Gang Zhao,Chuan He

DOI: https://doi.org/10.3390/math9091019

IF: 2.4

2021-01-01

Mathematics

Abstract:In conventional modeling, shared control points can be employed to realize a unified representation for an object consisting of only curves or only surfaces touching one another. However, this method fails in treating the following two cases: (a) a system consisting of detached curves or surfaces; (b) a system having both curves and surfaces. The purpose of the present paper is to develop a new theoretical tool to solve such problems. By introducing the definitions of naked knot and I-mesh, the concept of I-spline is put forth, which is, in essence, an expanded B-spline or T-spline. It is verified by examples that the naked knots make I-splines flexible and effective in transforming different surfaces and/or curves into a unified one, especially in the above two cases.
Representing Quadric Surfaces Using NURBS Surfaces

Qin Kaihuai

DOI: https://doi.org/10.1007/bf02948971

1997-01-01

Abstract:A method for representing quadric surfaces using NURBS is presented. By means of the necessary and sufficient conditions for NURBS curves to precisely represent circular arcs and other conics, quadric surfaces can be represented by NURBS surfaces with fewer control vertices. The method can be used not only for NURBS surface representation of quadric surfaces, but also for rounding polyhedrons. Many examples are given in the paper.
Construct Smooth Surfaces Based on Manifold

Qing Wang,Hujun Bao

2006-01-01

Ruan Jian Xue Bao/Journal of Software

Abstract:In this paper, the regular domain of traditional parametric surface is generalized to manifold, and a new method is proposed to construct smooth surface based on this domain manifold. This method uses shortest distance to build base function, and creates arbitrary topology smooth surfaces directly without split and joint. The result surfaces based on this method can be controlled easily in locally area, and a lot of algorithms used in NURBS surface also can be applicable here. The experimental results show that the construct method can easily generate complex surface.
Expression of block matrixes of cubic NURBS surface and its application in surface design

Xin-rui GAO,Shu-sheng ZHANG,Zeng-xuan HOU

DOI: https://doi.org/10.3969/j.issn.1000-7024.2005.04.031

2005-01-01

Abstract:The expression of block matrixes of cubicand square NURBS surfaces and itsapplication insurface design is mainly discussed. The coefficient matrixes of cubic and square NURBS base functions and the expression of block matrixes of cubic NURBS surface are given. From this expression, the relationship among parametric zone, patch, and control points can be easily understood. This is very important to the free form deformation and its solutions. It is proved to be high efficient and reliable under Java2.0 and Java3D environment.
The multivariate quartic NURBS surfaces

LiChong-Jun,WangRen-Hong

IF: 2.872

2004-01-01

Journal of Computational and Applied Mathematics

Abstract:In this paper, we construct a kind of multivariate quartic nonuniform rational B-spline (NURBS) surfaces by using bivariate quartic B-spline bases in the multivariate spline space S42(Δmn(2)), and ...
General Resolution of Modification of NURBS Volume and Surface

Xin-rui GAO,Shu-sheng ZHANG,Yuan LI,Zeng-xuan HOU

DOI: https://doi.org/10.3321/j.issn:1003-8728.2005.07.010

2005-01-01

Abstract:This paper mainly discusses the relationship among parametric zone, patch or cell and control points under free form deformation of NURBS volume and surface. The modification of a patch or cell within some parametric zone is only related with limited control points. This can reduce the complexity of solutions of free form deformation.
Methods and Techniques for Advanced Curve and Surface Modeling

LZ Ma,ZJ He

DOI: https://doi.org/10.1117/12.235545

1996-01-01

Abstract:This paper concentrates on the modeling of complex surfaces over arbitrary topologies. Methods and techniques newly developed are presented for high-quality curve and surface modeling in CAD system, e.g., composing of rectangular and triangular patches, modeling of closed surfaces over polyhedral topologies, blending free-form surfaces with geometric continuity. The data structure and data exchange are based on STEP, the international standard for external representation of product data. NURBS (Nonuniform Rational B-spline Surface) representation is adopted as a unified approach to advanced curve and surface design.
Advanced Curve and Surface Design in Cad-System Using Step

LZ MA,ZJ HE,JX DONG

DOI: https://doi.org/10.1109/tencon.1993.320056

1993-01-01

Abstract:In this paper, methods and techniques newly developed are presented for high-quality curve and surface modeling in CAD systems. The data structure and data exchange are based on STEP, the international standard for external representation of product data. While accurate algebraic representation is used for lower degree curves and surfaces, NURBS (Nonuniform Rational Bspline Surface) representation is adopted as a unified approach to advanced curve and surface design. We thus have both advantages for accurate shape processing in CAD/CAM and high-quality design of shapes with free-form surfaces.<>
B-spline Expression of Integral Curvature Line on NURBS Surface

Li Hongkun,Wang Guojin,Liu Ligang

DOI: https://doi.org/10.3321/j.issn:1003-9775.2006.03.011

2006-01-01

Abstract:B-spline Expression of Integral Curvature Line on NURBS Surface Li Hong-kun Wang Guo-jin Liu Li-gang (Department of Mathematics, Zhejiiang University, Hangzhou, 310027) (State Key Laboratory of CAD&CG, Zhejiang University, Hangzhou 310027) Abstract This paper presents a systemic formula for computing the integral curvature lines on NURBS surfaces. The discrete normal is used to simplify the calculation of the second fundamental form of the surface largely, which accelerate the Euler iteration process in solving the differential equation of curvature line. The discrete points on the curvature line are then obtained and approximated by a B-spline curve on the NURBS surface within some tolerance based on singular mixed interpolation. Our approach proposed in this paper will help enhance the application and generalization of curvature lines in CAGD and surface modeling.
Uniform B-Spline Curve and Surface with Shape Parameters.

Liu Xumin,Xu Weixiang,Guan Yong,Shang Yuanyuan

DOI: https://doi.org/10.1109/csse.2008.354

IF: 1.094

2010-01-01

Graphical Models

Abstract:In this paper, we have studied in depth a new modeling method of the parameter curve and surface—uniform B-spline surface with shape parameters. Based on this model, we have given an example of Free-form curve modeling, and analyzed the effect that different shape parameters have on the change of the shape of the curves. In light of the theory of computer graphics, we developed a Space Free-form Surface Modeling System (SFSMS) on Microsoft Computer. Through the prototype system, we processed with the Free-form surface modeling, gave examples for its application, and discussed how the adjustment of the shape parameters affects the change of the shape of Free-form surface.
Product Shape Systems Design Based on NURBS Curve and Surface Modelling Theorem

Lu Yawen,Li Jijun,Fang Gu

DOI: https://doi.org/10.3321/j.issn:1002-8331.2006.08.026

2006-01-01

Abstract:This paper deals with the designing of the curve and surface modeling for a product shape system,which integrates NURBS curves/surfaces and solid modeling modules.A lot of hierarchical classes for curves and surfaces are put forward for the convenient of extension and maintenance,and also a practical procedure is discussed in this system.Data sharing is achieved with the link of data importing and exporting to improve the efficiency and to shorten the periods of production designing.In the displaying modules,a displaying class consisting of two display link lists is designed to show graphical objects rapidly.
Construction of Generalized λμ-Ball Curves of Degree n

Bo Du,Xinguang Yuan,Jingyu Zhong,Gang Hu

DOI: https://doi.org/10.1109/icivc55077.2022.9887204

2022-01-01

Abstract:In Computer Aided Geometric Design (CAGD), the representation of curves and surfaces is a research focus. Benefiting from the fast computing speed and excellent properties of the basic functions, the Ball curves and surfaces have been widely used and deeply studied. In this paper, a generalized Ball curve with two parameters is constructed and discussed, called λμ-Ball curves. Firstly, based on the cubic Ball basic function with shape parameters, we derive the λμ-Ball basis functions of degree n by using the recursive algorithm. Then, the properties of λμ-Ball basis functions are discussed. Finally, the G <sup xmlns:mml="http://www.w3.org/1998/Math/MathML" xmlns:xlink="http://www.w3.org/1999/xlink">1</sup> continuity conditions of the generalized λμ-Ball curve are given. The results show that λμ-Ball curve can be adjusted more flexibly by modifying the shape parameters and describing the complex geometry under the G <sup xmlns:mml="http://www.w3.org/1998/Math/MathML" xmlns:xlink="http://www.w3.org/1999/xlink">1</sup> continuity conditions.
A New Nurbs Offset Curves And Surfaces Algorithm Based On Different Geometry Shape

Xu Xiduo,Li Jijun,Zheng Hong

DOI: https://doi.org/10.1109/CAIDCD.2009.5374927

2009-01-01

Abstract:A new approach for computing NURBS offset curves and surfaces was proposed in this paper. First of all, the special NURBS curves and surfaces were recognized to be different with free form ones. The offsets of the special cases were precisely calculated according to their equations. The offset of free form NURBS curves and surfaces were solved using the following steps: (1) Decomposing the NURBS curve and surface into Bezier segments or surface patches; (2) Sampling Bezier segments or surface patches and removing duplicate points; (3) Interpolating the offset points and creating offset curve or surface; (4) Reducing the control points by removing all removable knots with a user defined tolerance. On the premise of keeping the shape of offset curves and surfaces, not only the degree of curve or surface could be freely controlled, but also less number of control points was needed and also duplicate knots were avoided. It was proved in practical engineering that the efficiency and precision were improved mush.

Generalized NURBS Curves and Surfaces.

Point-normal Subdivision Curves and Surfaces

Matrix Weighted Rational Curves and Surfaces

Variational Surface Design under Normal Field Guidance

G1 continuous approximate curves on NURBS surfaces

Subdivision Algorithm and G1 Condition for C-Bézier Curves

Unified Representation of Curves and Surfaces

Representing Quadric Surfaces Using NURBS Surfaces

Construct Smooth Surfaces Based on Manifold

Expression of block matrixes of cubic NURBS surface and its application in surface design

The multivariate quartic NURBS surfaces

General Resolution of Modification of NURBS Volume and Surface

Methods and Techniques for Advanced Curve and Surface Modeling

Advanced Curve and Surface Design in Cad-System Using Step

B-spline Expression of Integral Curvature Line on NURBS Surface

Uniform B-Spline Curve and Surface with Shape Parameters.

Product Shape Systems Design Based on NURBS Curve and Surface Modelling Theorem

Construction of Generalized λμ-Ball Curves of Degree n

A New Nurbs Offset Curves And Surfaces Algorithm Based On Different Geometry Shape