Abstract:This study used an analytical model to investigate the factors that affect the reconstruction accuracy composed of the baseline length, lens focal length, the angle between the optical axis and baseline, and the field of the view angle. Firstly, the theoretical expressions of the above factors and measurement errors are derived based on the binocular three-dimensional reconstruction model. Then, the structural parameters’ impact on the error propagation coefficient is analyzed and simulated using MATLAB software. The results show that structural parameters significantly impact the error propagation coefficient, and the reasonable range of structural parameters is pointed out. When the angle between the optical axis of the binocular camera and the baseline is between 30° and 55°, the ratio of the baseline length to the focal length can be reasonably reduced. In addition, using the field angle of the view that does not exceed 20° could reduce the error propagation coefficient. While the angle between the binocular optical axis and the baseline is between 40° and 50°, the reconstruction result has the highest accuracy, changing the angle out of this range will lead to an increase in the reconstruction error. The angle between the binocular optical axis and the baseline changes 30° through 60° leads to the error propagation coefficient being in a lower range. Finally, experimental verification and simulation results show that selecting reasonable structural parameters could significantly reduce measurement errors. This study proposes a model that constructs a binocular three-dimensional reconstruction system with high precision. A portable three-dimensional reconstruction system is built in the article.

Optimum structural design of binocular sensor

Structural parameter design and accuracy analysis of binocular vision measuring system

Structural Parameters Optimal Design and Accuracy Analysis for Binocular Vision Measure System

Layout optimization of binocular stereo vision measuring system

Analysis and Application on Uncertain Zone in Binocular Vision

Optimal Design On Effective Viewing Field And Structure Layout Of Two-Ccds Vision Sensor

Structure Design of Binocular Vision Sensor Using Mono-camera with Mirrors

Precise and Robust Binocular Camera Calibration Based on Multiple Constraints

Study on High-Precision Inspection Multi-Vision Cameras Space Layout

The analysis of the structural parameter influences on measurement errors in a binocular 3D reconstruction system: a portable 3D system

Research on Structural Parameter Optimization of Binocular Vision Measuring System for Parallel Mechanism

Accuracy Analysis of Binocular Vision System

Analysis on Structural Parameters of Binocular Stereo Vision System

System Structural Error Analysis in Binocular Vision Measurement Systems

Multi-camera Layout Design on Large Scope Visual Inspection and Its Data Registration

A Comparative Study on Omni-Directional Vision Sensors Satisfying Single Viewpoint Constraint Condition

Modeling and Optimal Design of Double-CCD Vision Sensor

Precise Calibration Of Binocular Vision System Used For Vision Measurement

Calibration Error Simulating Analysis of Binocular Vision Based on Pinhole Camera Model

Analysis of Imaging Optical Characteristics of Vision Sensor with Single Camera and Double Spherical Mirrors

CALIBRATING BINOCULAR VISION SENSOR WITH ONE-DIMENSIONAL TARGET OF UNKNOWN MOTION