Abstract:Optical crystals grown by Czochralski technique from a solute-rich melt usually suffer defects of melt inclusion or bubble core defects, which severely affect the optical, thermal and mechanical properties of the material. It is well known that the formation of melt inclusion or bubble core is highly related to species distribution in the growth system especially at the solidification interface and the shape of the growth interface. This paper has examined the flow pattern and solidification interface changes by changing the forced convection, e.g., crystal rotation and by changing the natural convection, e.g., inserting a horizontal disk plate. The relative effect of fluid-flow convection modes in the melt associated with crystal rotation rate is represented by a dimensionless parameter, Gr/Re-2. Increasing the rotation rate will cause the solid-liquid interface change from the convex shape to concave. When the crystal rotation rate is relatively low and natural convection is strong, Gr/Re-2 is large. In this case, the concentration of species pertinent to melt inclusion moves down along the axis of rotation. When the crystal rotation rate is increased, the value of Gr/Re-2 decreases. The precipitated composition spreads over the growing interface may then be swiped away from the growth interface by increased crystal rotation. Melt inclusion-free crystals can thus be obtained. The relationship between Gr/Re-2 and growth interface shape change is achieved by numerical simulations. The stagnant point location as a function of crystal rotation is also presented, which shows that the stagnant point moves outward by increasing Reynolds number and/or reducing Grashof number. From such understanding, the interface shape and melt inclusion position can then be controlled through control of Gr/Re-2 in the growth system. Many times, it is, however, not practical in the experiments to use a high rotation rate for optical crystal growth since high rotation rate will introduce the striation defects. A new design to reduce natural convection is then proposed to improve the effect of crystal rotation and to control the solidification interface shape. Numerical simulations have been performed to demonstrate the possibility of the new design. Results show that such design is very effective and practical to control the melt inclusion and the solidification interface shape.

Structure design of a new type tank furnace with better operation performances

Non-linear mapping and multi-objective optimization of leading flow structure in plate-fin heat exchanger

Study on the Characteristics of Molten Glass in a Float Glass Process with a New Structure

Numerical Simulation of Temperature Field of Melting Pools with Different Horizontal Width in the Bottom of Float Glass Furnace

A new type of heating furnace adopting controllable hybrid technique

Numerical Investigation of the Glass Melt Flow with Different Location of Water-Bag in Float Glass Furnace

New similarity criteria for model experiment of glass melt flow and heat transfer in tank furnaces

Application of Numerical Simulation and New Fining Index in Operating Parameters Optimization of Float Glass-Melting Furnace

Space numerical simulation of full oxygen combustion flame in glass melting furnace based on flue gas preheating

System design and hot zone optimization of monocrystalline silicon directional solidification furnace for PV application

3D finite element analysis on overall structure of new basic oxygen furnace system

Numerical analysis of thermohydraulic behavior in a directional solidification furnace

Analysis on phase distribution and flow field morphology in double side blown gas-liquid mixture flows with high temperature and high density melt

Numerical modeling and parameter optimization of the combustion chamber in a tower-type zinc refining furnace

Structure Improvement of Floating Head Heat Exchanger Based on Computational Fluid Dynamics

Melting assessment on the effect of nonuniform Y-shaped fin upon solid–liquid phase change in a thermal storage tank

Structure Optimization Research Based on Numerical Simulation of Flow Field in Ammonia-Based Wet Sintering Flue Gas Desulfurization

Control Of Flow Pattern And Solidification Interface Shape In An Induction Heated Czochralski Crystal Growth System

Inverse design of operational parameters for iron-rich phase separation from solid waste melts in induction furnace through transport phenomena analysis and multi-objective optimization

Coupled fluid-thermal-structural analysis during the air cooling for glass tempering

Optimization design of structure of bottom spray quenching tank