Abstract:In this paper, a four-probe measurement system is implemented and verified for the carriage slide motion error measurement of a large-scale roll lathe used in hybrid manufacturing where a laser machining probe and a diamond cutting tool are placed on two sides of a roll workpiece for manufacturing. The motion error of the carriage slide of the roll lathe is composed of two straightness motion error components and two parallelism motion error components in the vertical and horizontal planes. Four displacement measurement probes, which are mounted on the carriage slide with respect to four opposing sides of the roll workpiece, are employed for the measurement. Firstly, based on the reversal technique, the four probes are moved by the carriage slide to scan the roll workpiece before and after a 180-degree rotation of the roll workpiece. Taking into consideration the fact that the machining accuracy of the lathe is influenced by not only the carriage slide motion error but also the gravity deformation of the large-scale roll workpiece due to its heavy weight, the vertical motion error is thus characterized relating to the deformed axis of the roll workpiece. The horizontal straightness motion error can also be synchronously obtained based on the reversal technique. In addition, based on an error separation algorithm, the vertical and horizontal parallelism motion error components are identified by scanning the rotating roll workpiece at the start and the end positions of the carriage slide, respectively. The feasibility and reliability of the proposed motion error measurement system are demonstrated by the experimental results and the measurement uncertainty analysis.

Measurement method of the rolling angle

Survey of rolling angle measurement methods

Measurement Method of the Roll Angle

High-Accuracy Method for Measuring Two-Dimensional Angles of A Linear Guideway

Eccentricity Parameter Identification of Angle Sensors for Articulated Arm CMMs

Roll angle measurement based on common path compensation principle

A Three-dimension High-Precision and Non-contact Dynamic Angular Displacement Measurement System based on Heterodyne Interference

A New Method to Eliminate the Misalignment Angle in Dynamic Goniometer Based on Fiber Optic Gyro

1502 Precision Measurement of Vertical Straightness of a Roll Workpiece on an Ultra-Precision Lathe

Implementation and Verification of a Four-Probe Motion Error Measurement System for a Large-Scale Roll Lathe Used in Hybrid Manufacturing

Evaluation of Relative Vertical Error Motions of a Bench Center by Using an Optical Micrometer

Precision Roll Angle Measurement System Basedon Autocollimation

A Novel Method of Rolling Angle Measurement

Measurement Method for Roll Angular Displacement with A High Resolution by Using Diffraction Gratings and A Heterodyne Interferometer

Measurement and Characterization of Rotational Errors of Aerostatic Bearings in Subnanometer Accuracy

Angle Measurement Based on Orthogonally Polarized Lasers

Measurement Error Analysis for Machine Tool Roll Error Measurement Due to Inclined Half Wave Plate

A New Error Measurement Method to Identify All Six Error Parameters of A Rotational Axis of A Machine Tool

Full-scale Measurement of CNC Machine Tools

A Field Calibration Method to Eliminate the Error Caused by Relative Tilt on Roll Angle Measurement

High-precision dynamic measurement of roll angle based on digital holography