Abstract:Experimental, numerical and analytical methods were used to investigate the effects of the blade trailing edge thickness on the profile loss of ultrahigh-lift low-pressure turbine blades. Two cascades, the T106C and the T2, were studied. The loss obtained based on the data at the blade trailing edge plane and the plane 0.3 Chord downstream of the trailing edge agree with each other for T106C blade with and without upstream wakes at different Reynolds numbers. The blade profile losses were broken down as the suction surface boundary loss, the pressure side boundary loss and the mixing loss downstream of the trailing edge for six Reynolds numbers. Trailing edge thicknesses varying from 1.4% to 4.7% pitch were investigated at a Reynolds number of 210,000. It was found that the flow distributions across the passage at the trailing edge planes were highly nonuniform. In particular, and as a result, the trailing edge base pressure was higher than the mixed-out static pressure, so the contribution of the base pressure to the mixing loss downstream of the trailing edge plane was to reduce the loss. When the trailing edge thickness increases, there are three main effects: (1) the area with high base pressure region increases, which tends to reduce the downstream mixing loss; (2) the base pressure reduces, which tends to increase the loss; and (3) the flow diffusion downstream of the trailing edge, which tends to increase the loss. The overall result is the combined effect. For the T106C cascade, increasing the trailing edge thickness from 1.9% pitch to 2.8% pitch has a small effect on the loss. Further increasing the trailing edge thickness increases the loss. The T2 blade has a higher lift than the T106C blade, so the effects of the base pressure in reducing the mixing loss downstream of the trailing edge is more evident. The experimental results show that the profile loss first decreases and then increases as the trailing edge thickness increases. CFD, using the transition k-ω SST model and the k-ω SST model, provides good predictions of the aerodynamic performance. It was used to study the cases with trailing edge thicknesses of 1.4% pitch and 2.9% pitch. The profile loss is almost the same for these two trailing edge thickness. The results show that it is possible to use thicker blade trailing edges in low pressure turbines without aerodynamic penalty. This can lead to benefits in terms of mechanical integrity and manufacturing cost reductions.

The Chordwise Lean of Highly Loaded Turbine Blades

Les and Cdns Investigation of T106c Low Pressure Turbine

Roughness Effects on Flow Losses of a High-Lift Low-Pressure Turbine Cascade

Statistical Investigations of Profile Error Impact on Flow and Performance of a Low-Pressure Turbine Cascade

Flow fields and losses downstream of an ultra-highly loaded turbine cascade with bowed blades

Secondary Flow Reduction By Blade Redesign And Endwall Contouring Using An Adjoint Optimization Method

Effects of Leaning and Curving of Blades with High Turning Angles on the Aerodynamic Characteristics of Turbine Rectangular Cascades

Experimental Investigation of the Aerodynamic Performance of Bowed Blades in High-turning Linear Turbine Cascades

Effects of Blade Curve on Turbine Cascade Performance

The Blade Curving Effects in a Turbine Stator Cascade With Low Aspect Ratio

Blade Bowing Effect on Aerodynamic Performance of a Highly Loaded Turbine Cascade

The Effects of Trailing Edge Thickness on the Losses of Ultrahigh Lift Low Pressure Turbine Blades

The Effects Of Trailing Edge Thickness On The Losses Of Ultra-High Lift Lp Turbine Blades

Experimental investigation on the influence of bowed blade in ultra-highly loaded turbine cascade

Influence of Blade Lean Together with Blade Clocking on the Overall Aerodynamic Performance of a Multi-Stage Turbine

Analysis of the Mechanism Governing the Migration of Boundary Layers in a Highly-loaded Turbine Cascade Controlled By Using Bowed Blades

Experimental and Numerical Investigations for Dual−Cavity Tip Aerodynamic Performance in the Linear Turbine Cascade

A numerical investigation of application of bowed blade to control flow separation on highly loaded turbine

Wind Tunnel Testing and Modeling Implications of an Advanced Turbine Cascade

Comparative Experimental Investigation on Aerodynamic Performance of Steam Turbine Cascades, Part I - Rotor Blades

Investigation of non-axisymmetric endwall contouring in a high loaded turbine stator cascade