Abstract:Understanding the mechanism of the iron-carbon reactive wetting process is very important to understand the interaction between molten iron and carbonaceous materials in the ironmaking process. In this paper, the method of ReaxFF molecular dynamics simulation was used to study the microscopic mechanisms involved in the iron-carbon reactive wetting process. The study examines spreading area, contact angle, microscopic atomic structure, and the interfacial processes. It was found that the wetting process between molten iron and graphite is different for the different crystal orientations of graphite. The wettability of molten iron on the graphite prism plane is better than that on the basal plane. However, the degree of corrosion of molten iron on the graphite basal plane is greater, which is directly related to the way of exfoliation of atoms at different crystal orientation planes. The exfoliation of carbon atoms in the graphite basal model is more complicated, and there are two steps. The iron atoms are in contact with the graphite layer, leading to the formation of defects, which in turn destroy the graphite structure. Then, the iron atoms come into contact with the unsaturated carbon in the pores of the graphite, thereby exfoliating the carbon atoms from the graphitic structure. And the carbon atom exfoliation method in the graphite prism model is relatively simple.

A study of the reactivation process of iron in acid solution

A Study on Transition of Iron from Active into Passive State

Quantitative Analysis of Iron Dissolution during Repassivation of Freshly Generated Metallic Surfaces

Impedance investigation of the anodic iron dissolution in perchloric acid solution

An ac impedance study of the anodic dissolution of iron in sulfuric acid solutions containing hydrogen sulfide

In situ Monitoring of pH at the Electrode|Electrolyte Interface During the Anodic Dissolution of Iron in Acidic Solutions

Effect of citric acid as a chelating agent on anodic behavior of pure iron with potentiostatic polarization and cyclic voltammetry methods

INFLUENCE OF CONCENTRATION OF HCO3- TO ANODIC REACTION OF X70 STEEL

EIS analysis on the anodic dissolution kinetics of pure iron in a highly alkaline solution

Passivation and Depassivation of HPB335 Carbon Steel in Simulated Concrete Pore Solution

Separation and Kinetic Study of Iron Corrosion in Acidic Solution Via a Modified Tip Generation/substrate Collection Mode by SECM

Micro-electrolysis of Cr (VI) in the nanoscale zero-valent iron loaded activated carbon.

H3O+-dependent morphological change in the electrochemical deposition of iron

Problems on the Study of Anodic Films on Pb in Sulfuric Acid Solution(Ⅰ)

Investigation of chloride-induced depassivation of iron in alkaline media by reactive force field molecular dynamics

Pii: s0375-9601(00)00794-5

The Study of the H2O2 During Oxygen Reduction Process on Typically Corroding Metal Surface Using Tip Generation-Substrate Collection Mode of SECM

A study of the reduction process of anodic PbO2 film on Pb in sulfuric acid solution

Electrochemical behaviour of chromium in acid solutions with H2S

Interaction of Mechanical and Electrochemical Factors During Corrosion-Fatigue of Fe-26cr-1mo Stainless-Steel in 1m H2so4 Solution

The dissolutive wetting behavior between liquid iron and carbonaceous materials: Experiment and ReaxFF molecular dynamics simulation