Abstract:In this study, the microstructural evolution, particularly precipitation behavior, and mechanical properties of cast Al–Li–Cu–Cd–Mn–Zr–Ti alloy during heat treatment are systematically examined. It provides a detailed discussion of the underlying mechanisms involved. After aging at 160 °C for 24 h, the alloy exhibits an excellent combination of strength and elongation, surpassing other cast Al–3Li–2Cu–X alloys reported in the literature. The microstructural evolution and mechanical properties of cast Al–Li–Cu–Cd–Mn–Zr–Ti alloy during heat treatment are investigated systematically. In these findings, it is shown that the as‐cast alloy exhibits fine and equiaxed grains. During the solid solution treatment, Al20Cu2Mn3 dispersoids effectively restrict grain growth, and reducing the solid solution time has a similar effect. Subsequently, the precipitation behavior and its effect on the mechanical properties during the aging process are revealed. Al3(Ti, Zr) particles are uniformly distributed throughout the matrix, acting as nucleation sites for δ′, θ′, and T1 precipitates. Overtime, δ′ precipitates gradually coarsen and decrease in number, and some δ′ precipitates attach to Al3(Ti, Zr) particles, forming core–shell Al3(Li, Ti, Zr) phases. At the same time, plate‐shaped θ′ and T1 precipitates emerge and coarsen. After aging at 160 °C for 24 h, the alloy exhibits an excellent combination of strength (yield strength =293.3 ± 4 MPa, ultimate tensile strength =468.0 ± 3 MPa) and ductility (elongation =9.6 ± 0.4%), surpassing those reported in other cast Al–3Li–2Cu–X alloys. Critically, the underlying mechanisms behind the microstructure and mechanical properties are discussed extensively, providing valuable insights for the advancement of cast Al–Li alloys.

On the microstructure and tensile properties of rapidly solidified Al-Li alloy by spray deposition processing

Microstructure and tensile properties of rapidly solidified Al-3.8Li-0.8Mg-0.4Cu-0.13Zr alloy prepared by spray deposition

The Effect of Al on Microstructure and Properties of Cu-15Ni-8Sn During the Aging

Age precipitation phase in rapidly solidified Al-Li alloy made by spray deposition process

Microstructure evolution and precipitation characteristics of spray-formed and subsequently extruded 2195 Al-Li alloy plate during solution and aging process

Microstructure of Rapidly Solidified Al-3.8li-0.8mg-0.4cu-0.13zr Alloy by Spray Deposition Processing

Microstructures and tensile properties of spray-deposited high-strength aluminium alloys

Microstructural evolution and mechanical properties of the rapidly-solidified and hot-extruded 2196 Al-Li alloy

Microstructures and Cryogenic Mechanical Properties of Spray Deposited 2195 Al–Cu–Li Alloy with Different Heat Treatments

Hot compressive deformation behavior and microstructural evolution of the spray-formed 1420 Al–Li alloy

Achieving High Performance by Optimized Heat Treatment in a Spray Formed Al–Zn–Mg–Cu Alloy

Microstructure Evolution and Mechanical Properties of Spray-Deposited Al–21. 47Si-4. 73Fe-2. 5Cu-0. 9mg Alloy

Microstructure characteristics of an ultra-high strength extruded Al-4.7Cu–1Li-0.5Mg-0.1Zr–1Zn alloy during heat treatment

Influence of Li addition on mechanical property and aging precipitation behavior of Al-3.5Cu-1.5Mg alloy

Microstructural evolution, precipitation behavior and mechanical properties of a novel Al–Zn–Mg–Cu–Li–Sc–Zr alloy

Microstructure and Properties of 50si50al Alloy by Spray Forming

Properties And Microstructure Of Cu-15ni-8sn Alloy Prepared By Spray Forming

Uncovering Microstructure Evolution and Dynamic Softening Mechanism of Spray-Deposited AlZnMgCu Alloy Under Thermal Deformation

Effects of Mg and Cu on Microstructures and Properties of Spray-Deposited Al-Zn-Mg-Cu Alloys

Precipitation behavior of an Al–Cu–Li–X alloy and competing relationships among precipitates at different aging temperatures

Microstructural Evolution, Precipitation Behavior, and Mechanical Property Response of Cast Al–Li–Cu–Cd–Mn–Zr–Ti Alloy