Abstract:The external piping system which connects power devices, valve control devices, actuators, etc. is an essential system on the aero engine. Under the combined effects of high fluid pressure and external vibration, multiaxial fatigue failure is the main factor that seriously affects the safety of the piping system. The objective of this paper is to establish the multiaxial fatigue life model for the typical welded fuel pipe of the piping system by combining fatigue testing, simulation and theoretical analysis which is of great guiding significance for the engineering application of the piping system. Firstly, the fatigue limits of welded fuel pipes under no and 13.5 MPa internal pressure are obtained by rotational bending fatigue tests using the up-and-down method. Three additional stress levels of rotational bending fatigue tests under no internal pressure are supplemented and then the S-N curve is further obtained by the group method. Since the corresponding fracture surface of the specimens locates at the weld toe near the fixed end, peak stress method is adopted to evaluate the fatigue performance of the weld toe on the pipe specimens. In addition, by comparing the fatigue limit with no and 13.5 MPa internal pressured pipes, it is obvious that the equivalent uniaxial stress corrected by Gerber formula is not applicable for the multiaxial fatigue condition which is caused by the combined effect of fluid pressure and displacement load. The local stress concentration factor caused by the weld toe is determined and based on Findley critical plane model, the multiaxial fatigue life model is established which simultaneously takes the local stress concentration effect, mean stress effect and multiaxial stress effect into consideration. The results of rotational bending fatigue tests under 13.5 MPa internal pressure are within the triple error dispersion band and the accuracy of the proposed life model are verified.

Investigation of low-cycle fatigue life for pressure vessel by damage mechanics approach

Study on the Prediction Method of the Ultra-Low-Cycle Fatigue Damage of Steel

A New Approach to Low-Cycle Fatigue Damage Based on Exhaustion of Static Toughness and Dissipation of Cyclic Plastic Strain Energy During Fatigue

A New Approach for Studying Fatigue Damage

An approach to investigating evolution of fatigue damage on surface of structural steel based on microhardness

Effects of low-cycle fatigue on static mechanical properties, microstructures and fracture behavior of 304 stainless steel

Continuum Damage Model of Low-Cycle Fatigue and Fatigue Damage Analysis of Welded Joint

A new damage variable for low-cycle fatigue of metallic materials

Cumulative damage model for steel weld under low-cycle fatigue

A Fatigue Damage Accumulation Model Based on Continuum Damage Mechanics and Ductility Exhaustion

Experimental Investigation of Fatigue Behaviour for Welded Joint with Mechanical Heterogeneity

Damage Cumulation Analysis of Welded Joints under Low Cycle Loadings

Low-Cycle Fatigue Life Prediction Of 10crni3mov Steel And Undermatched Welds By Damage Mechanics Approach

Fatigue Performance Testing and Life Prediction of Welded Fuel Pipes

A Continuous Low Cycle Fatigue Damage Model and Its Application in Engineering Materials

A Life Prediction Model for Low Cycle Fatigue Based on Continuum Damage Mechanics

A CDM model for remaining fatigue-lifetime prediction of ductile metals

A Combined Fatigue-Ductile Damage Model with Optimized Parameters for Predicting the Mechanical Response of High-Cr Steels at High Stress Levels

Mesomechanics Analysis of Fatigue Damages

Low Cycle Fatigue Damage Evolution & Life Estimate of 10CrMo910 Steel

Bi-variable Damage Model for Fatigue Life Prediction of Metal Components