Abstract:The vacuum surface flashover voltage of dielectric material irradiated by electron beam is very low, which is the key scientific issue for developing high-voltage and high power spacecraft technology. This paper proposes a novel research way of considering the combined impact of incident kinetic electrons flowing to dielectric surface and deposited electrons in dielectric surface layer on dc surface flashover performance in vacuum. The experiments on dc surface flashover of polyimide in vacuum after electron irradiation and during electron irradiation were investigated. The experimental results indicated flashover voltage showed a distinctly different variation tendency under the two cases. The dc surface flashover voltage of polyimide after electron irradiation became higher than that without electron irradiation, because of the effect of deposited electrons in dielectric surface layer. During electron irradiation, the dc surface flashover voltage exhibited a dramatic drop from 26.9 kV (energy: 5 keV) to 10.5 kV (energy: 30 keV). Furthermore, the surface flashover characteristics exerts different changes for incident electrons of different energies levels. It has been experimentally indicated that the energy and incident trajectory of incident kinetic electrons flowing to polyimide surface are altered by the combined action of the reverse electric field created by deposited electrons and the applied electric field. As a result, the surface flashover characteristics were changed. This work provides a new insight into the vacuum surface flashover of dielectric material under electron irradiation, and can be used as the research basis of surface flashover mitigation methods in space environment.

Studies and applications of plastics-sealed diodes irradiated with high energy electrons

Using 12 MeV electron beams to develop silicon P+NN+ high frequency rectifying diodes

Study of Irradiation Induced Changes of Electrical and Functional Characteristics in Ge Doped Si Diodes

Electron-beam-induced current evidence for room-temperature photoluminescence of silicon pn diode

Study of the Leakage Current Degradation Based on Stacking Faults Expansion in Irradiated SiC Junction Barrier Schottky Diodes

Study of Leakage Current Degradation Based on Stacking Faults Expansion in Irradiated SiC Junction Barrier Schottky Diodes

Electron beam irradiation enhanced varistor properties in ZnO nanowire

Investigation of the synergistic effects on 4H-SiC junction barrier Schottky Diodes after multiple irradiation

High-Dose Electron Radiation and Unexpected Room-Temperature Self-Healing of Epitaxial SiC Schottky Barrier Diodes

Effect of gamma-ray irradiation on lateral charge motion on surface of laminated polymer insulating materials

Design and experimental study of electron beam treatment for composite insulator sheds

Effect of Electron Irradiation on Dc Surface Flashover of Polyimide in Vacuum

Effect of Neutron Irradiation on Current-Voltage Characteristics of Packaged Diodes Based on 6H-SiC pn Structures

Production of High-Tension High-Power Switch Transistorsby High Energy Electron Irradiation

Concurrent Enhancement of Breakdown Strength and Dielectric Constant in Poly(vinylidene Fluoride) Film with High Energy Storage Density by Ultraviolet Irradiation.

Effect of High-Energy Electron Irradiation on the Microstructure and Properties of Polyetherimide

Computational Study of Cathode Plasma Dynamics in High-Power Electron Beam Diodes by Particle-in-cell Simulations

Mechanism Study on Highly Efficient Polymer Light-Emitting Diodes Utilizing Double-Layered Alkali Halide Electron Injection Layer

Research on two typical intense current self-pinching diodes

Influence of High Current Pulsed Electron Beam Irradiation on Ni-P Electroless Plating

Calculations of single particle displacement damage currents in ultra-low leakage current diode