Abstract:We report a type of multimode fiber interferometers (MMI) formed in photonic crystal fiber (PCF). To excite the cladding modes from the fundamental core mode of a PCF, a coupling point is formed. To form the coupling point, we used the method that is blowing compressed gas into the air-holes and discharging at one point, and the air-holes in this point will expand due to gas expansion in the discharge process. By placing two coupling points in series, a very simple all-fiber MMI can be implemented. The detailed fabrication process is that the one end of the PCF is tightly sealed by a short section of single mode fiber (SMF) spliced to the PCF. The other end of the PCF is sealed into a gas chamber and the opened air holes are pressurized. The PCF is then heated locally by the fusion splicer and the holes with higher gas pressure will expand locally where two bubbles formed. We tested the RI responses of fabricated sensors at room temperature by immersing the sensor into solutions with different NaCl concentration. Experimental results show that as refractive-index (RI) increases, the resonance wavelength of the MMI moves toward longer wavelengths. The sensitivity coefficients are estimated by the linear fitting line, which is 46nm/RIU, 154mn/RIU with the interferometer lengths (IL) of 3mm and 6mm. The interferometer with larger IL has higher RI sensitivity. The temperature cross-sensitivity of the sensor is also tested. The temperature sensitivity can be as low as -16.0pm/degrees C.

Multi-component-intermodal-interference mechanism and characteristics of a long period grating assistant fluid-filled photonic crystal fiber interferometer.

Implementation and Characterization of Liquid-Level Sensor Based on a Long-Period Fiber Grating Mach–Zehnder Interferometer

Photonic crystal fibre based modal interferometer with four-beam path interference

Mode-Coupling and Propagation in a Deeply-Tapered Few-Period Long-Period Fiber Grating

Inline fiber interference-based refractive-index sensor

A Three-Beam Path Photonic Crystal Fiber Modal Interferometer and Its Sensing Applications

Long-period grating and its cascaded counterpart in photonic crystal fiber for gas phase measurement

Multi-modes Interferometer for Magnetic Field and Temperature Measurement Using Photonic Crystal Fiber Filled with Magnetic Fluid

Photonic crystal fiber refractive-index sensor based on multimode interferometry

Fabrication and Characterization of Femtosecond Laser Inscribed Long-Period Fiber Grating in Few-Mode Fiber

Programmable Long-Period Grating in a Liquid Core Optical Fiber.

Versatile Interferometric Sensor Based on Sandwiched Grapefruit Photonic Crystal Fiber

Cascaded long-period fiber gratings on an all-solid photonic bandgap fiber

Fiber in-line Mach–Zehnder interferometer constructed by selective infiltration of two air holes in photonic crystal fiber

Compact Long Period Fiber Grating Based on Periodic Micro-Core-Offset

Fabrication and Sensing Characteristics of Long-Period Fiber Grating in Capillary Fiber

CO2 laser-written long-period fiber grating with a high diffractive order cladding mode near the turning point

Numerical Investigation on a New Designed Hollow-Core Photonic Crystal Fiber with Large Modal Separation

Ultrasensitive long-period gratings sensor works near dispersion turning point and mode transition region by optimally designing a photonic crystal fiber

Strain and Temperature Characteristics of a Long-Period Grating Written in a Photonic Crystal Fiber and Its Application as a Temperature-Insensitive Strain Sensor