Abstract:The polyamide 6 (PA6)/KCl composites were prepared by the melt blending method. The effect of KCl content on the crystallization behavior, as well as the rheological and mechanical properties of the composities was studied by differential scanning calorimeter (DSC), advanced rheometer (ARES-G2), Fourier fransform infrared spectrometer (IR) and universal testing machine. The mechanism of confined crystallization was also systematically investigated. The mechanical property results show that the tensile strength and notch impact strength increased first and decreased finally with the increase of KCl content. When the amount of KCl was 3 phr, the tensile strength and notch impact strength of the PA6/KCl composities reached the maximum values of 82. 67 MPa and 7. 34 kJ/m(2), respectively, which presented 10. 8% and 34. 68% improvement compared to those of the pure PA6. The dynamic mechanical property measurement results demonstrated that the storage modulus of the composite materials was higher than that of pure PA6 in the measuring temperature range, and the storage modulus of the composites increased with the increase of KC1 content. The crystallization behavior results reveal that with the addition of KCl content, the temperature of nucleation, the growth temperature of crystal, the melt temperature of crystal and the glass transition temperature of spherulites dramatically decreased. The density and the rate of nucleation also decreased gradually, the crystallization ability of PA6/KCl composites decreased and the crystallinity decreased from 20. 30% to 19. 34%, the crystallization induction time gradually increased. The rheological property results showed that with the increase of KCl content, the composites exhibited zero shear viscosity and pseudo plastic fluid behavior, and the phenomenon of shear thinning became more and more obvious, the changes in relaxation mechanism led to the gradually increase in the characteristic relaxation time tau(1), tau(2) and tau(3).

Mechanical Properties, Crystallization and Melting Behaviors of Carbon Fiber-Reinforced PA6 Composites

Effects of Carbon Fiber Content on the Crystallization and Rheological Properties of Carbon Fiber-Reinforced Polyamide 6

Mechanical Properties and Nonisothermal Crystallization of Polyamide 6/carbon Fiber Composites Toughened by Maleated Elastomers

Structure and Perpormance of Polyamide 6 Composites Reinforced by Glass Fiber Compounded with Nano-Sio2 or Canbon Nanotubes

Investigation of the nanostructure and nanomechanical properties of the interphase in carbon fiber reinforced polyamide-6 composite

A Comparative Study of the Crystalline Structure and Mechanical Properties of Carbon Fiber/polyamide 6 Composites Enhanced With/without Silane Treatment

Reinforcement of polyamide 6 with carbon fiber surface modified by a polar cross-linked network interfacial phase

Properties of oriented carbon fiber/polyamide 12 composite parts fabricated by fused deposition modeling

Graphite fluoride reinforced PA6 composites: Crystallization and mechanical properties

Improved Thermal and Mechanical Properties of Carbon Fiber Filled Polyamide 46 Composites

Crystallization and Melting Behavior of Multi‐walled Carbon Nanotube‐reinforced Nylon‐6 Composites

Interfacial Enhancement and Composite Manufacturing of Continuous Carbon-Fiber-Reinforced PA6T Composites via PrePA6T Ultrafine Powder

Properties of Polymer Composites Reinforced by Self-welded Carbon Fiber Networks

Construction of double grafted interfacial layer to improve thermal and mechanical properties of short carbon fiber reinforced polyamide 6 composites

Effect of fiber surface treatment with silane coupling agents and carbon nanotubes on mechanical properties of carbon fiber reinforced polyamide 6 composites

The study on microstructure and mechanical properties of multi-component composite based on HDPE

Toughening Behavior and Morphology Study of PA6/thermal Liquid Crystalline Polyamide Blends

Inherent relationship between process parameters, crystallization and mechanical properties of continuous carbon fiber reinforced peek composites

Polyamide 6 Composite with Highly Improved Mechanical Properties by PEI-CNT Grafted Glass Fibers Through Interface Wetting, Infiltration and Crystallization

Crystallization and Rheological Behaviors of Amino-Functionalized Multiwalled Carbon Nanotubes Filled Polyamide 6 Composites

Studies on the Crystallization and Properties of PA6/Potassium Chloride Composites