Abstract:A 5-DoF fully parallel machining robot (PMR) with attitude coupling motion property holds the potential to realize the high-efficiency and high-quality machining of complex parts with curved surfaces. Mechanistically, this type of 5-DoF fully PMR can achieve no singularity in the workspace after optimum design, allowing the mobile platform to be adjusted to an arbitrary orientation directly and flexibly. To full leverage these mechanical characteristics, the concept of planning orientation paths in a unit spherical coordinate system was proposed in our previous work, thereby enhancing orientation adjustment efficiency. However, challenges in toolpath continuity and computational simplicity still persist. In light of this concern, constraint equations were formulated to ensure continuity between two adjacent B-splines, and a configuration of control points was established to maintain controllable curvature. Building on this, a symmetrical arrangement strategy was introduced to set shape limits for fitted B-splines to achieve high-order continuity, and a corresponding toolpath planning method was developed. To decrease computational complexity during feedrate scheduling, a system of linear constraints was utilized to calculate the feedrate for each point, with the feedrate calculation and interpolation occurring concurrently to generate the motion trajectory in real time. Trajectory planning for S-shaped toolpaths was conducted using the proposed method and the commercial ISG CNC kernel, with comparison results demonstrating that our method significantly improves motion efficiency, reduces computational complexity, and mitigates feedrate and acceleration fluctuations. This study offers a more efficient and effective trajectory planning approach, significantly contributing to the advancement of 5-DoF PMR technology.

Double NURBS five-axis tool path planning with equal distance based on dual quaternion

Non-redundant tool trajectory generation for surface finish machining based on geodesic curvature matching

A Real-Time Dual NURBS Interpolator with Optimised Control of Flexible Acceleration and Deceleration for Five-Axis CNC Machining

An Algorithm To Generate Compact Dual Nurbs Tool Path With Equal Distance For 5-Axis Nc Machining

Dual-Bézier path smoothing and interpolation for five-axis linear tool path in workpiece coordinate system

Double B-Spline Curve-Fitting and Synchronization-Integrated Feedrate Scheduling Method for Five-Axis Linear-Segment Toolpath

Smooth Non-Uniform Rational B-spline (NURBS) Machining with Kinematic Limit for Short Linear Segments

Enhancing Five-Axis CNC Toolpath Smoothing: Overlap Elimination with Asymmetrical B-splines

A Dual NURBS Curve Five-Axis Interpolator with Interval Division under Axial Kinematic Constraints

Dual NURBS Curve Interpolation Algorithm for 5-Axis Machining

Five-axis Tool Path Generation in CNC Machining of T-spline Surfaces

An Analytical Decoupled Corner Smoothing Method for Five-Axis Linear Tool Paths.

Smoothing interpolation of five-axis tool path with less feedrate fluctuation and higher computation efficiency

Toolpath Smoothing with Reduced Curvature and Synchronized Motion for Hybrid Robots

A Symmetrical Arrangement Strategy Based Real-Time Toolpath Planning Method for a 5-Dof Fully Parallel Machining Robot

Analytical Curvature-Continuous Dual-Bézier Corner Transition for Five-Axis Linear Tool Path

Realization of a 5-Axis NURBS Interpolation with Controlled Angular Velocity

A Real-Time C3 Continuous Tool Path Smoothing and Interpolation Algorithm for Five-Axis Machine Tools

Global smoothing for five-axis linear paths based on an adaptive NURBS interpolation algorithm

Five-axis Toolpath Interpolation Method with Kinematic Corner Smoothing and Time Synchronization

Non-isometric dual-spline interpolation for five-axis machine tools by FIR filtering-based feedrate scheduling using pseudo curvature under axial drive constraint