Abstract:Proceedings of the Institution of Mechanical Engineers, Part C: Journal of Mechanical Engineering Science, Ahead of Print. This paper aims to optimize a fuzzy logic controller (FLC) active seat suspension applied to an articulated truck semi-trailer seat to improve ride comfort considering the energy consumption of the controller. The proposed truck model is a linear truck with 13 degree-of-freedom (DOF). Two objective functions are defined seat root mean square (RMS) acceleration related to ride comfort and controller RMS force pertaining to the energy consumption of the controller. The Pareto Front is obtained for these two objective functions using the multi-objective optimization method in MATLAB. The optimization is based on the Non-Dominated Sorting Genetic Algorithm (NSGA-II), which has been proposed as a powerful decision space exploration engine based on a genetic algorithm (GA) for solving a multi-objective function problem. Technique for Order of Preference by Similarity to Ideal Solution (TOPSIS), which is simple and effective, selects a set of optimal controller parameters. In addition, considering the changes of effective parameters in the truck, including trailer load and location, tyres' stiffness and the driver's mass, has been investigated to provide Monte Carlo sensitivity analysis of these parameters on objective functions. Finally, using ISO 2631-1, the ride comfort and controller required force levels before and after optimization are compared. The results of this optimization indicate a significant improvement in ride comfort and controller force which has been different in various conditions of truck speed and road classes. The results have shown that the maximum amount of improvement in ride comfort is about 25% which happens on Class-C road (at the truck speed of 60 km/h), and the control force reduction peaks at around 60%, which occurs on Class-A road (at the truck speed of 60 km/h). The simulation is validated by MSC-ADAMS software.

Multi-Objective Optimization of Vehicle Air Suspension Based on Simulink-Mfile Mixed Programming

Parameters optimization of interconnected hydro-pneumatic suspension for road comfort and road-friendliness based on genetic algorithm

Multi-objective and Multi-criteria Decision Optimization of Automobile Suspension Parameters

Road-friendliness of interconnected hydro-pneumatic suspension based on ADAMS/Simulink/AMESim

Pareto Optimal Solution of Vehicle Suspension Optimization

Vibration Performance Optimization of the Semi-Active Suspension with Fuzzy Control Method

Multi-objective optimization of the suspension system parameters of a full vehicle model

Multi-objective optimization study of vehicle suspension based on minimum time handling and stability

Efficiency improvement of vehicle active suspension based on multi-objective integrated optimization

Multiobjective Optimization of an Off-Road Vehicle Suspension Parameter through a Genetic Algorithm Based on the Particle Swarm Optimization

A new multi-objective optimization method for full-vehicle suspension systems

Multi-objective H2/H∞ control of uncertain active suspension systems with interval time-varying delay

An approach for multi-objective optimization of vehicle suspension system

Multi-fidelity surrogate-based optimal design of road vehicle suspension systems

Multi-Objective Lightweight Optimization of Parameterized Suspension Components Based on NSGA-II Algorithm Coupling with Surrogate Model

Active suspension LQR control based on modified differential evolutionary algorithm optimization

Improving ride comfort and road friendliness of heavy truck using semi-active suspension system

Study on the coordination control of active suspension employing linear motor based on co-simulation

Coordinate Control of Vehicle Semi-Active Suspension Based on Adams/Car and Matlab/Simulink

A multi-objective optimization method based on NSGA-II algorithm and entropy weighted TOPSIS for fuzzy active seat suspension of articulated truck semi-trailer

Active Control of Vehicle Suspension Systems Based on Modal Decomposition Method