Abstract:VO2 nanobelts with metal–semiconductor properties were prepared through low temperature hydrothermal reaction and post annealing. X-Ray diffraction (XRD), scanning electron microscopy (SEM), high resolution transmission electron microscopy (HRTEM), differential scanning calorimetry (DSC) and UV-vis-NIR spectrophotometry were employed to investigate the evolution of structure, morphology and properties of the VO2 nanobelts. The results illustrate that the pure VO2 (B) nanobelts can be obtained by hydrothermal reaction. The shape of the nanobelts evolves with hydrothermal temperature, time and reactant concentration. With the increasing of hydrothermal temperature from 160 °C to 200 °C, the nanobelts become homogenous and regular. The regular nanobelts are also obtained by the decrease of V2O5 concentration. Samples prepared at 200 °C over 48 h have superior morphology and crystallinity. After annealing, VO2 (B) can be transformed into VO2 (M), which is dependent on the hydrothermal conditions. Samples prepared at 160 °C over 48 h and 180 °C over 48 h can be transformed into VO2 (M) at 450 °C over 2 h, while samples obtained at 200 °C over 48 h should be annealed at 500 °C for 2 h. The nanobelts are transformed into irregular nanostructures, nanorods and nanobelts at the hydrothermal temperatures of 160 °C, 180 °C and 200 °C, respectively. However, samples prepared at 200 °C over 48 h with a V2O5 concentration of 0.0125 M can keep the intact nanobelts after annealing. The DSC analysis proves that the VO2 (M) shows good phase transition behavior around 68 °C and the phase transition temperature can be reduced to 58 °C by 0.5 at% tungsten doping. After mixing the VO2 (M) with acrylic resin, the visible transmission of the VO2 composite coating on glass is up to 52.2% and the solar modulation at 2000 nm is up to 31.5%, which means that it is a good candidate for smart windows.

Preparation Of Tungsten-Doped Vo2 (M) Nanoparticles Through Sol-Gel Method And Hydrothermal Synthesis

Low Temperature Synthesis of Vanadium Pentoxide Nanocrystallines by Sol-Gel Method

A Facile Process to Prepare One Dimension VO2nanostructures with Superior Metal–semiconductor Transition

A liquid approach for the synthesis of M phase VO2 nanocrystals: Facile synthesis, characterization and reaction mechanism

The Influence of Temperature on Preparing Tungsten Doped Vanadium Dioxide Films by Sol-Gel Method

Preparation and Thermochromic Property of Tungsten-Doped Vanadium Dioxide Particles

Synthesis of Tungsten-Doped Vanadium Dioxide Using a Modified Polyol Method Involving 1-Dodecanol

One-pot Hydrothermal Synthesis of Vanadium Dioxide Nanoparticles

Phase, Microstructure, Thermochromic, and Thermophysical Analyses of Hydrothermally Synthesized W-Doped VO2 Nanopowder

Structural phase transition of tungsten-doped vanadium dioxide nanopowders prepared by thermolysis

Reactivity of Vanadium Nanoparticles with Oxygen and Tungsten

Synthesis of VO<sub>2</sub> Nanocrystalline via Hydrothermal Method

Effects of Preparation Parameters on Room Temperature Formation of Vanadium-Doped Tio2 Nanocrystalline Powder

Sol-gel synthesis and characterization of tungsten-molybdenum solid solution nanoparticles

Accelerated microwave-assisted synthesis and in situ X-ray scattering of tungsten-substituted vanadium dioxide (V1−xWxO2)

Tungsten-doped vanadium dioxide thin film synthesis by alternate layer-by-layer growth and post-deposition annealing

Preparation of Transparent, Hard Thermochromic Polysiloxane/tungsten-Doped Vanadium Dioxide Nanocomposite Coatings at Ambient Temperature

The Structure and Electrochemical Performance of V2O5 Powder Prepared by Hydrothermal Synthesis at Various Acidification Conditions

Microwave Hydrothermal Preparation of VO2

Fabrication of V-Doped TiO2 Nanoparticles and Photocatalytic Studies under Visible Light

Preparation and Photocatalytic Activity of Vanadium-doped Nano-TiO_2