Abstract:In this study, an output-only method for extraction of modal macrostrain and damage identification of bridges under ambient excitation is presented. It is theoretically proved that the modal macrostrain within the gauge length of a long-gauge macrostrain sensor is uniquely determined by the peak value of the power spectral density (PSD) of dynamic macrostrain response. Then damage occurred within the gauge length of a sensor can be identified by the ratio change between the peak value of PSD of this sensor response and that of the reference sensor response. The damage extent has also been verified to have corresponding relationship with the ratio change. Numerical simulation was carried out to confirm the feasibility of the proposed method. Analysis results of the numerical simulation reveal that the maximum error of the identified modal macrostrain relative to that of the modal analysis is 3%. Results of simulation show that the proposed PSD-based method can not only accurately localize the damage but also assess the damage extent. The influence of several typical excitations on real bridges was also investigated that further proves the robustness of the method. It is worth mentioning that only the first-order mode is necessary for the method to identify damage. Finally, the proposed method is employed for condition assessment of a real bridge located in New Jersey, wherein 17 long-gauge macrostrain sensors with the gauge length of 1 m were distributedly arranged along the critical region of the girder. Analysis results of the field measurements further verify that the PSD-based method can be utilized to assess the damage state of structures under ambient excitation.

Damage identification of T-beam bridge based on distributed long-gauge strain mode theory

Damage Identification and Bearing Capacity Evaluation of Bridges Based on Distributed Long-Gauge Strain Envelope Line under Moving Vehicle Loads

Damage Identification Research of Reinforced Concrete Beam Using Strain Response

Damage Identification Analysis of Bridge Beam with Spaced Supports As Quasi-Periodic Structure

Damage Identification Method for Continuous Girder Bridges Based on Spatially-Distributed Long-Gauge Strain Sensing under Moving Loads

Modal Strain Energy-Based Model Updating Method for Damage Identification on Beam-Like Structures

A Two-Step Method for Beam Bridge Damage Identification Based on Strain Response Reconstruction and Statistical Theory

Damage Detection Strategy Using Strain-Mode Residual Trends for Long-Span Bridges

Damage Identification of Multi-Box Steel-Concrete Composite Bridges Based on Modal Curvature Difference Method

Strain-Based Damage-Assessment Method for Bridges under Moving Vehicular Loads Using Long-Gauge Strain Sensing

Damage Identification of Simply-Supported Beam Bridge Based on Deflection Influence Line

A Vibration-Based Approach for Damage Identification and Monitoring of Prefabricated Beam Bridges

Distributed Strain Damage Identification Technique for Long-Span Bridges under Ambient Excitation

Damage Identification Method of Box Girder Bridges Based on Distributed Long-Gauge Strain Influence Line under Moving Load

Damage Identification of a Long-Span Suspension Bridge Using Temperature-Induced Strain Data

Investigation on the damage identification of bridges using distributed long-gauge dynamic macrostrain response under ambient excitation

Structural Identification and Damage Detection Through Long-Gauge Strain Measurements

Damage Identification Based On Dynamic Test For Long-Span Continuous Rigid-Frame Bridge With High Piers In Cold Area

Damage identification method for beam bridge based on mode shape weighted modal flexibility

Modal Analysis Technique for Bridge Damage Detection

Damage Detection Method for Long Span Cable-Stayed Bridge Based on Model Updating