Abstract:Based on the response of a bridge to various excitations, Structural Health Monitoring (SHM) systems can provide comprehensive, real-time insight into their condition. While collected data usually represents the response to a combination of known and unknown loads, modified data, cleaned of the effects of dynamic loadings, can be made to represent the response of the structure to only constant dead loads and slowly changing and easily measured cyclic thermal loads. While it is often common to separate the effect of these two loads, the proposed method suggests that it is advantageous to consider the combined effect. Furthermore, once a limited amount of response data due to these loads has been collected, their combined effect can be easily predicted.A simplified model, consisting of the key structural components of a cable-stayed bridge, a beam, an inclined cable, and a bearing, and a more complex, that of a Finite Element cable-stayed bridge model, were used to evaluate the ability of the proposed method for identifying changes in these three elements. Beam damage was simulated as a flexural stiffness reduction for part of the beam, cable damage as an axial stiffness reduction of the cable and the bearing damage as a stiffness increase of a horizontal spring supporting the free to roll end of the beam. Using the model, it was shown that the behavior of two parameters, the slope and the intercept taken from the beam strain-temperature curve, can be used to not only identify change/damage to these members, but more importantly, determine the nature of the change/damage. Combined with the fact that the method has limited requirements for collecting, storing, and processing data, the proposed methodology represents a very promising Damage Identification tool.

Damage Detection Method for Long Span Cable-Stayed Bridge Based on Model Updating

Damage Detection for Long-Span Cable-Stayed Bridge

Structural Damage Detection of Cable-Stayed Bridges Using Changes in Cable Forces and Model Updating

Vibration-Based Damage Detection Of Cable-Stayed Bridges

Damage identification of main girders for long span cable-stayed bridge based on flexibility matrix

Multi-scale Damage Analysis for a Steel Box Girder of a Long-Span Cable-Stayed Bridge

Structural performance degradation of cable-stayed bridges subjected to cable damage: model test and theoretical prediction

Multi-scale finite element model updating of highway bridge based on long-gauge strain response

Multi-level finite element modeling of long-span bridges for structural damage diagnosis and safety evaluation

A Study of Damage Diagnosis Technique for Cable-Stayed Bridge

Comprehensive Dynamic Indexes For Damage Detection Of Cable-Stayed Bridges

Time-varying damage model and fatigue reliability assessment for box-girder of long-span steel bridge

Damage identification of a large-span concrete cable-stayed bridge based on genetic algorithm

Identification of Damages in Stay Cables of Long-Span Cable-Stayed Bridges

Damage Detection in Long Suspension Bridges Using Stress Influence Lines

Failure Patterns and Ultimate Load-Carrying Capacity Evolution of a Prestressed Concrete Cable-Stayed Bridge: Case Study

Structural Damage Detection for the Main Girder of Cable-stayed Bridges Based on Mahalanobis Distance Cumulants

Time history analysis-based nonlinear finite element model updating for a long-span cable-stayed bridge

Damage Detection Strategy Using Strain-Mode Residual Trends for Long-Span Bridges

Damage identification in cable-stayed bridges based on the redistribution of dead and thermal loads