Abstract:To diagnose the state of stay cables, a vibration-based model-free damage diagnosis method of stay cables using the changes in natural frequencies is further proposed and validated. The structural frequency is rapidly and easily acquired; moreover, it is simple and reliable for damage diagnosis. The frequency would change after the stay cable is damaged, so the frequency change could be used as the damage index. However, the stay cables are very long in long-span cable-stayed bridges, and their frequencies are very small; the frequency change due to small damage of the stay cable would be submerged by the surrounding noise and error of parameter identification process. A temporary diagonal steel bar–based method is used to solve this issue. The steel bar is installed with one end on the stay cable close to the bottom anchor head and the other end on the bridge deck; thus, the stay cable is divided into a short part and a long part by the steel bar. The frequency of a stay cable with a given tension force increases with the decrease in its length; according to the qualitative analysis, the frequency of the short part increases dramatically, and the local frequency change of the short part due to the same damage in the whole stay cable is amplified dramatically; thus, the small damage of a stay cable can be diagnosed easily. Numerical simulations of a stay cable selected from a cable-stayed bridge and a laboratorial stay cable are used to validate the method and also give a recommended rule for design of the temporary diagonal steel bar; experimental validation has also been conducted. All the results indicate that the proposed method works very well in damage diagnosis of stay cables. The proposed method is an output-only, model-free, fast and economical damage diagnosis method for stay cables.

Identification of Damages in Stay Cables of Long-Span Cable-Stayed Bridges

Dynamic Responses of Cable-Stayed Bridges to Vehicular Loading Including the Effects of the Local Vibration of Cables

Damage Detection for Long-Span Cable-Stayed Bridge

Vibration-Based Damage Detection Of Cable-Stayed Bridges

Multi-scale Damage Analysis for a Steel Box Girder of a Long-Span Cable-Stayed Bridge

Finite element analysis and test study of dynamic behavior of a cable-stayed bridge

Structural Damage Detection of Cable-Stayed Bridges Using Changes in Cable Forces and Model Updating

Experimental and Numerical Studies on A Test Method for Damage Diagnosis of Stay Cables

Damage identification of main girders for long span cable-stayed bridge based on flexibility matrix

Study on Typical Dynamic Characteristics of a Long-span Prestressed Concrete Cable-stayed Bridge

Performance Variations of A Cable-Stayed Bridge with Damaged Cables

Numerical and Experimental Study of Free Vibration Characteristics of a Cable-Stayed Bridge

Multiple Damaged Cables Identification in Cable-Stayed Bridges Using Basis Vector Matrix Method

Damage identification of a large-span concrete cable-stayed bridge based on genetic algorithm

An Improved Static Residual Force Algorithm and Its Application in Cable Damage Identification for Cable-Stayed Bridges

MULTI-SCALE DAMAGE ANALYSIS FOR STEEL BOX GIRDER OF LONG-SPAN CABLE-STAYED BRIDGES

Structural performance degradation of cable-stayed bridges subjected to cable damage: model test and theoretical prediction

Static Load Test and Calculation on Multi-tower Cable-Stayed Bridge with Tie-down Cables

Nonlinear Static Analysis of Long-Span Cable-Stayed Bridges under Dead Loads

Multi-level finite element modeling of long-span bridges for structural damage diagnosis and safety evaluation