Abstract:Existing studies on the seismic responses of long-span cable-stayed bridges under strong earthquake excitations have mostly been performed through numerical methods. In this work, a shaking-table experiment was conducted based on a long-span cable-stayed bridge with a main span of 1088 m and typical inverted-Y-shaped towers. The test model had a total length of 59.65 m and a height of 9.1 m. Micro-concrete was used for the model to meet the payload limit of the shaking tables. Pretest numerical analyses were carried out and the results showed that both the flexural and compressive/tensile properties of the column elements had effects on the seismic responses of the inverted-Y-shaped towers. Thus, the frequently used scaling strategy for conventional columns, with only strictly scaled sectional flexural stiffness and bending moment capacity, is not suitable for structures with stable triangle frames. The steel girder was designed to have properly scaled flexural stiffness, and the decreased strain responses in turn allowed the simplification of the cable system. A total of 28 pairs of cables were used for the bridge model compared to 136 pairs of cables for the prototype bridge, and 42 and 50 additional mass blocks were utilized for the girder and for each of the model towers, respectively. The errors induced by the simplification of the cable system and the additional lumped mass were no greater than 8% when compared with the theoretical mass distribution. Based on the white-noise tests, the identified natural modes of the scaled bridge model are consistent with those extracted from the numerical simulation. The observed failure mode matched well with the numerical prediction, and comparative responses between the numerical simulation and experimental test were shown. These results validated the design of the scaled bridge model.

Numerical and Experimental Study of Free Vibration Characteristics of a Cable-Stayed Bridge

Dynamic characteristics and seismic response analysis of cable-stayed bridges taking into account cable lateral vibration

Dynamic Responses of Cable-Stayed Bridges to Vehicular Loading Including the Effects of the Local Vibration of Cables

NONLINEAR VIBRATION OF STEEL AND CFRP CABLES OF LONG SPAN CABLE-STAYED BRIDGE UNDER VEHICULAR LOADS

Finite element analysis and test study of dynamic behavior of a cable-stayed bridge

Study on Typical Dynamic Characteristics of a Long-span Prestressed Concrete Cable-stayed Bridge

Estimation of Main Cable Tension Force of Suspension Bridges Based on Ambient Vibration Frequency Measurements

Experimental-Numerical Analysis on the Cable Vibration Behavior of a Long-Span Rail-Cum-Road Cable-Stayed Bridge under the Action of High-Speed Trains

Modeling and Parametric Analysis of In-Plane Free Vibration of a Floating Cable-Stayed Bridge with Transfer Matrix Method

Study on Effect of Cable Vibration on Dynamic Behavior of Cable-Stayed Bridges

Vibration-Based Damage Detection Of Cable-Stayed Bridges

Effect of Cable Vibration on Aerostatic Response and Dynamics of a Long Span Cable-Stayed Bridge

VIBRATION CHARACTERISTICS ANALYSIS OF CABLE-STAYED BRIDGES BY THE SUPER-ELEMENT METHOD

Dynamic Analysis and Test of Bridge Tower of Suspension Bridge Before and After Cable Installed

Modeling and Analysis of the In-Plane Vibration of a Complex Cable-Stayed Bridge

Finite Element Analysis and Experimental Study on Dynamic Characteristics of Bridge Structures

Modeling, dynamics, and parametric studies of a multi-cable-stayed beam model

Dynamic Characteristic Research of Cable-Stayed Bridges Considering Cable Local Vibration: Dynamic Behavior Analysis of Northern Channel Bridge in Hangzhou Bay

Influence of Structural System Measures on the Dynamic Characteristics of a Multi-Span Cable-Stayed Bridge

Design and Validation of a Shaking-Table Test Model on a Long-Span Cable-Stayed Bridge with Inverted-Y-shaped Towers

Baseline finite element modeling of a large span cable-stayed bridge through field ambient vibration tests