Abstract:When analyzing the dynamic characteristics of marine cables, the static equilibrium state must first be calculated; a dynamic analysis can then be carried out based on the static equilibrium. Since the calculation of the static equilibrium is the basis of dynamic calculation, different methods for the calculation of the static equilibrium will have important impacts on the dynamic response characteristics of cables, which result in cables having different dynamic characteristics. This paper summarizes the research progress in the effects of different methods for the calculation of the static equilibrium on the dynamic response of marine cables during the releasing process, and current methods for their static calculation are more comprehensively developed as well as being more accurate. To study the influence of different static equilibrium calculation methods, with the reference of some specific parameters of a mooring cable, combined with specific sea conditions, through the necessary simplification of the cable releasing process, based on the lumped mass method, mooring cables are discretized into the lumped mass model, and dynamic analysis models of the releasing process of mooring cables under three methods for the calculation of the static equilibriums (the fast static equilibrium calculation method, the analytic catenary calculation method, and the catenary calculation method) are established. The dynamic characteristics of the spatial configurations of mooring cables based on different static equilibrium calculation methods are obtained through time domain coupling analyses. It was found that if the static equilibrium of a cable is calculated, taking into account gravity, buoyancy, wave current resistance, inertia forces, and the axial stiffness of a cable, then the characteristics of a cable during dynamic descent are closest to that of a real situation. The calculation results have a certain guiding significance for specific engineering practices.

Comparative Study on Deepwater Umbilical Overall Response Characteristics

Dynamic Analysis of the Umbilical Cable Pull-in Operation Through J-tube under Different Wave Directions

Influence of Different Static Equilibrium Calculation Methods on the Dynamic Response of Marine Cables during the Releasing Process: Review and a Case Study

Lifting of Horizontal Subsea Pipeline with Diverse Lifting Points in Waves: Hydrodynamic Analysis

Static Analysis of Deepwater Lazy-Wave Umbilical on Elastic Seabed

IMPROVED EMPIRICAL FORMULATION FOR SEABED TRENCH PROFILE AT TOUCHDOWN ZONE AND ITS EFFECTS ON FATIGUE OF STEEL CATENARY RISERS

Influences of Pipelay Parameters on Dynamic Behavior of Deepwater J-Lay System

Analysis Of Subsea Umbilical Mechanical Behavior Under Simultaneous Bending, Tension And Torsion

Theoretical and Finite-Element Study of Mechanical Behaviour of Central, Large-Diameter Umbilical Cables under Tension and Torsion

Dynamic Analysis of Umbilical Cable under Interference with Riser

Lateral buckling of umbilical cable armour under compression and bending

Study on contact force between umbilical and overboarding chute in deepwater S-lay process

Configuration Analysis of Deepwater S-Lay Pipeline

Investigation on Dynamic Response of J-tube Submarine Cable Around Monopile Foundation

Analytical Prediction of Umbilical Behavior under Combined Tension and Internal Pressure

Buckling Response of Offshore Pipelines under Combined Tension and Bending

The Analysis of Mechanical Properties and Lightweight Design of Nonmetallic Armored Umbilical Cable

Parametric study on the mechanical behavior of submarine pipeline for deepwater S-lay operation

Experimental Investigation on Responses Characteristics of a Mooring Line with Imposed Top-End Motions

Numerical Assessment on the Dynamic Behaviour of Submarine Hoses Attached to CALM Buoy Configured as Lazy-S under Water Waves

Analysis on Buckling Performance of Submarine Pipelines During Deepwater Pipe-Laying Operation