Abstract:The blends composed of polyamide 6 (PA6) and polyamide 66 (PA66) were obtained using two different preparation methods, one of which was the melt-mixing through a twin-screw extruder and the subsequent injection molding; and the other, the in situ blending through anionic polymerization of epsilon-caprolactam in the presence of PA66. For the former, there existed a remarkable improvement in toughness but a drastic drop in strength and modulus; however, for the latter, a reverse but less significant trend of mechanical properties change appeared. Various characterizations were conducted, including the analyses of crystalline morphology, crystallographic for-in, and crystallization and melting behaviors using polarized optical microscopy (POM), wide-angle X-ray diffraction (WAXD), and differential scanning calorimetry (DSC), respectively; observation of morphology of fractured surface with scanning electron microscope (SEM); measurement of glass transition through dynamic mechanical analysis (DMA); and the intermolecular interaction as well as the interchange reaction between the two components by Fourier transform infrared spectrometry (FT-IR) and C-13 solution NMR. The presence and absence of interchange reaction was verified for the in situ and melt-mixed blends, respectively. It is believed that the transreaction resulted in a drop in glass transition temperature (T,) for the in situ blends, contrary to an increase of T, with increasing PA66 content for the melt-mixed ones. And the two kinds of fabrication methods led to significant differences in the crystallographic form, spherulite size and crystalline content and perfection as well. Accordingly, it is attempted to explain the reasons for the opposite trends of changes in the mechanical properties for these two blends. (c) 2007 Wiley Periodicals, Inc.

Effect of Glass Fibers with Different Surface Properties on the Morphology and Properties of Polyamide 6/poly(butylene Terephthalate) Blends

Polyamide 6 Composite with Highly Improved Mechanical Properties by PEI-CNT Grafted Glass Fibers Through Interface Wetting, Infiltration and Crystallization

Effect of PPO‐g‐MA on Structures and Properties of PPO/PA6/short Glass Fiber Composites

Polystyrene reinforced by self-welded glass fibers: Kinetics of polyamide 6 preferential segregation

Structure and Perpormance of Polyamide 6 Composites Reinforced by Glass Fiber Compounded with Nano-Sio2 or Canbon Nanotubes

Sustainable Basalt Fibers vs. Traditional Glass Fibers: Comparative Study on Thermal Properties and Flow Behavior of Polyamide 66-Based Composites

Preparation of PBT/POE‐g‐GMA/PP Ternary Blends with Good Rigidity–toughness Balance by Core–shell Particles

Ternary Polymer Composites: PA6,6/maleated SEBS/glass Beads

Thermoplastics reinforced by self-welded glass fibers: Effect of interfacial affinity on preferential segregation

Influence of Preparation Methods on the Structures and Properties for the Blends Between Polyamide 6co6t and Polyamide 6: Melt‐mixing and In‐situ Blending

Morphology, Thermal And Mechanical Properties Of Glass Fiber-Reinforced Crosslinkable Poly(Arylene Ether Nitrile)

Influence Of Different Compatibilizers On The Morphology And Properties Of Pa6/Pet/Glass Fiber Composites

Effects of Zinc Oxide Nanoparticles on the Morphology and Viscoelastic Properties of Polyamide 6/poly(butylene Terephthalate) Blends

Mechanical and tribological properties of PA66/PPS blend. III. Reinforced with GF

NYLON 6 COMPOSITES REINFORCED WITH GLASS FIBER/ETHYLENE-MALEIC ANHYDRIDE COPOLYMER/MULTIWALLED CARBON NANOTUBE HYBRID STRUCTURES BY ELECTROSTATICAL ABSORPTION

Influence of Preparation Methods on Structure and Properties of PA6/PA66 Blends: A Comparison of Melt‐mixing and in Situ Blending

Toughening of Poly (butylene Terephthalate) with Epoxy-Filled Poly (ethylene–octene) Copolymer

Morphology and electrical properties of polypropylene/polyamide 6/glass fiber composites with low carbon black loading

Modification on Glass Fiber Surface and Their Improved Properties of Fiber-Reinforced Composites Via Enhanced Interfacial Properties

Reinforcement effect of glass fiber modified by tannic acid and polyethyleneimine on polyamide 6 composites with no volatile organic compounds emission

Morphology and Properties of Bio-Based Poly (lactic Acid)/high-Density Polyethylene Blends and Their Glass Fiber Reinforced Composites