Abstract:Proceedings of the Institution of Mechanical Engineers, Part C: Journal of Mechanical Engineering Science, Ahead of Print. In underground coal mining, there is an urgent need for reducing the noise, hydraulic shock, and leakage of reciprocating pumps. Flow pulsation is strongly dependent on the number of pistons for single-acting reciprocating pumps. Water hydraulic radial piston pumps (RPPs) allow the pistons to be radially distributed, which makes the multi-piston design easier compared to traditional single-acting reciprocating piston pumps. In this study, a novel valve-distributed water RPP was developed in which the star wheel assembled on the camshaft is used to drive the connecting rod-crosshead-piston assembly and realize the reciprocation of the piston and suction-discharge of the pump check valves. Mathematical and numerical models representing the RPP were built using MATLAB and AMESim, respectively. Three-dimensional computational fluid dynamics analyses were performed to investigate the internal flow field of the suction and discharge circuits as well as the flow characteristics of the discharge valve opening. A prototype pump was manufactured and tested for 200 h and then disassembled to evaluate the wear condition. The tested instant flow rates were lower than those obtained from the theoretical and simulation analyses. The experimental results also revealed that the average flow rates were almost independent of the output pressure and that the volumetric efficiency decreased with increasing rotational speed when the output pressure was larger than 25 MPa. Inspecting the disassembled water RPP revealed that scuffing problems occurred in the pistons, whereas the other components remained intact. The findings of this study offer a reference for water hydraulic power units in various applications and for investigating the intensity of water hydraulics.

Simulation on Linear-Motor-Driven Water Hydraulic Reciprocating Plunger Pump

Design and control of the hydraulic reciprocating pump

Flow characteristics simulation and low-noise design of fuel piston pump

Experimental Research on Performance of Water Hydraulic Internal Gear Pump

Simulation on the dynamic pressure and flow of the seawater desalination axial piston pump

Analysis and Experimental Research on Efficiency Characteristics of a Deep-Sea Hydraulic Power Source

Dynamic characteristics of pilot-operated electro-hydraulic flow distribution system

Modeling and Analysis of Hydraulic Controlled Rotary Valve Excitation System

Dynamic Simulation of a Seawater Plunger Pump

New Distributing Mechanism for High Speed Single-Piston Axial Piston Pump

Design and Simulation of Linear Motor Pumping Unit

Low Leakage and High Volumetric Efficiency Research of Seawater Plunger Pump

Research on the Output Characteristic of a New Water Hydraulic Electrohydraulic Motor.

The Design and Analysis of a Hydro-Pneumatic Energy Storage Closed-Circuit Pump Control System with a Four-Chamber Cylinder

Structural Design of a Cross Wobble Plate Driving Axial Piston Pump Based on ADAMS and AMESim Co-simulation

Simulation research on the variable displacement hydraulic motor with variable effective piston stroke for hydraulic propulsion system

Design and experimental validation of a valve-distributed water radial piston pump

Investigation into the Effects of the Variable Displacement Mechanism on Swash Plate Oscillation in High-Speed Piston Pumps

Study on Control Performance of Digital Piston Pump Based on Virtual Prototype Technology

Numerical Simulation and Analysis on Hydraulic Performance in Vertical Canned Motor Pump

Modeling and Simulation on Axial Piston Pump Based on Virtual Prototype Technology