Abstract:The highly branched poly(thioether-urethane) acrylate (BPTUA) was synthesized through an “oligomeric A2+B3” approach. The thiol-endcapped difunctional oligomeric A2 was obtained by the addition reactions of isophorone diisocyanate with 1,4-butanediol, and then further with 1,4-butanediol bis(thioglycolate). Trimethylolpropane triacrylate was used as a B3 monomer. The addition conduct of 1,6-hexanediol diacrylate with 1,4-butanediol bis(thioglycolate) was introduced into the polymeric chain for preparing the modified BPTUA (m-BPTUA). The molecular structures were characterized with FT-IR and 1H NMR spectroscopy, and GPC analysis. The number average molecular weights (Mns) of BPTUA and m-BPTUA were experimentally measured to be 13,500gmol−1 and 17,900gmol−1 with the polydispersity indices of 1.86 and 1.94, respectively. A series of UV-curable resins were fabricated based on bisphenol-A epoxy diacrylate (EB600) and tripropylene glycol diacrylate with the addition of either BPTUA or m-BPTUA in different ratios, and exposed to a UV lamp for obtaining the cured films in the presence of 1-hydroxycyclohexylphenyl ketone as a photoinitiator. From the photo-DSC measurements, the polymerization rate at the peak maximum decreased, whereas the final unsaturation conversion in cured film increased, along with the increase of either BPTUA or m-BPTUA. The elastic modulus in the rubbery plateau and the glass transition temperature from DMTA, as well the tensile strength and Young's Modulus of UV-cured film decreased with increasing either BPTUA or m-BPTUA loading, whereas the elongation at break, flexibility and strike performance were greatly enhanced. Moreover, for the m-BPTUA series, the enhancive effects on the properties were much more obviously than the BPTUA series. The water swelling test and thermogravimetric analysis indicated that the water absorption resistance and the oxidative stability of cured films were improved by the incorporation of thioether linkage into the crosslink networks.

Structural effect of thiol-compounds on the thiol-ene based UV curable adhesive

Studies on Adhesion Performance of Epoxy Resin/Polymercaptan Toughened with Propoxylated Glycerin Triglycidyl Ether

Synthesis of Thermally Degradable Epoxy Adhesives

Effects of Active Diluents on Solidifying Process of UV-curing Reaction for Polyurethane Acrylate

Preparation and Properties of Thiol-Ene UV-Curable Fluorinated Emulsion

Studies on the influence of soft-segment structure on the properties of polyurethane adhesive

Effect of the Presence of a Silane Coupling Agent on Reaction Kinetics of Cationic Thermopolymerization of Epoxy Resin Adhesive

Effect of Silane Coupling Agent on Adhesion Properties between Hydrophobic UV-curable Urethane Acrylate and Acrylic PSA

Photopolymerization behavior and properties of highly branched poly(thioether-urethane) acrylates used for UV-curing coatings

Preparation of fluorescent UV-curable adhesives containing AIEgen-modified monomer

Effect of Polyurethane Derivatives on Performance of Poly(vinyl acetate) Emulsion Adhesive

Synthesis and Characterization of Hyperbranched and Organosilicone Modified Waterborne Polyurethane Acrylates Photosensitive Resin

Study in Curing Properties of Two-Component Solvent-Free Polyurethane Adhesive

Photothermal synergistic curing of one-component epoxy resin adhesive based on active monomer mechanism

Ultraviolet curing of liquid polysulfide thiourethane acrylate

Photo-Curing Kinetics and Cured Film Properties of UV Curable Waterborne Polyurethane Based on TMPME and BTEA

Thiol–epoxy/thiol–acrylate Hybrid Materials Synthesized by Photopolymerization

Investigation of Thiol-Ene Addition Reaction on Poly(Isoprene) under Uv Irradiation: Synthesis of Graft Copolymers with "V"-Shaped Side Chains

Influence of thiol and ene functionalities on thiol-ene networks: Photopolymerization, physical, mechanical, and optical properties

Synthesis and application of reactive polybutadiene modifiers and their application in structural adhesives

Synthesis and Properties of UV Curable Polyurethane Acrylates Based on Two Different Hydroxyethyl Acrylates