Abstract:The human wrist, a complex articulation of skeletal muscles and two-carpal rows, substantially contributes to improvements in maneuverability by agilely performing three-degree-of-freedom (3-DOF) orienting tasks and regulating stiffness according to variations in interaction forces. However, few soft robotic wrists simultaneously demonstrate dexterous 3-DOF motion and variable stiffness; in addition, they do not fully consider a soft-rigid hybrid structure of integrated muscles and two carpal rows. In this study, we developed a soft-rigid hybrid structure to design a biomimetic soft robotic wrist (BSRW) that is capable of rotating in the x and y directions, twisting around the z -axis, and possessing stiffness-tunable capacity. To actuate the BSRW, a lightweight soft-ring-reinforced bellows-type pneumatic actuator (SRBPA) with large axial, linear deformation ( η lcmax =70.6%, η lemax =54.3%) and small radial expansion ( η demax =3.7%) is designed to mimic the motion of skeletal muscles. To represent the function of two-carpal rows, a compact particle-jamming joint (PJJ) that combines particles with a membrane-covered ball-socket mechanism is developed to achieve various 3-DOF motions and high axial load-carrying capacity (>60 N). By varying the jamming pressure, the stiffness of the PJJ can be adjusted. Finally, a centrally positioned PJJ and six independently actuated SRBPAs, which are in an inclined and antagonistic arrangement, are sandwiched between two rigid plates to form a flexible, stable, and compact BSRW. Such a structure enables the BSRW to have a dexterous 3-DOF motion, high load-carrying ability, and stiffness tunability. Experimental analysis verify 3-DOF motion of BSRW, producing force of 29.6 N and 36 N and torque of 2.2 Nm in corresponding rotations. Moreover, the range of rotational angle and stiffness-tuning properties of BSRW are studied by applying jamming pressure to the PJJ. Finally, a system combining a BSRW and a soft enclosing gripper is proposed to demonstrate outstanding manipulation capability in potential applications.

Design and Simulation of A Pam Based Bionic Elbow Joint

Modeling and simulation of humanoid lower limb based on Pneumatic Artificial Muscle

Design and Compliance Control of Rehabilitation Exoskeleton for Elbow Joint Anchylosis

An Upper-Limb Power-Assist Exoskeleton Using Proportional Myoelectric Control

Design and Simulation Experiment of Rigid-Flexible Soft Humanoid Finger

Enhancing the Performance of a Biomimetic Robotic Elbow-and-Forearm System Through Bionics-Inspired Optimization

A Novel Elbow-Inspired Cable-Driven Tensegrity Joint: Bionic Design, Coupled Kinematics, and Load Performance

Design and Analysis of a Bionic Two-Dof Joint for Dual-Arm Manipulator

Design and Control of an Upper Limb Bionic Exoskeleton Rehabilitation Device Based on Tensegrity Structure

Design and Simulation of a 3-DOF Dexterous Joint Actuator Based on Multi-Drive Hierarchical Output and Spherical Rotation Mechanism

Design of a Bionics Shoulder Joint Driven By Pneumatic Muscle Actuators

Kinematics and Dynamics Analysis of a 3-DOF Upper-Limb Exoskeleton with an Internally Rotated Elbow Joint

Bio-inspired Control of a Rehabilitation Robot Actuated by Pneumatic Artificial Muscles

Design and Position Control of a Bionic Joint Actuated by Shape Memory Alloy Wires

Design and Mechanics Simulation of Bionic Lubrication System of Artificial Joints

An Anthropomorphic Musculoskeletal System with Soft Joint and Multifilament Pneumatic Artificial Muscles

Biomimetic soft robotic wrist with 3-DOF motion and stiffness tunability based on ring-reinforced pneumatic actuators and a particle jamming joint

All-Fabric Bi-directional Actuators for Multi-joint Assistance of Upper Limb

Modeling and control of a curved pneumatic muscle actuator for wearable elbow exoskeleton

Bionic Design to Reduce Driving Power for a Portable Elbow Exoskeleton Based on Gravity-balancing Coupled Model