Abstract:Steel plate shear walls (SPSWs) have been widely employed in practical engineering projects. The steel plates inevitably endure axial loads due to the gravitational forces and structural settling. However, vertical pre-compressive loads have detrimental effects on the buckling behavior and shear resistance of the steel plates. Instead of strengthening the SPSWs to resist the vertical loads, a new type of vertically-flexible stiffened steel plate shear wall (VFS-SPSW) is proposed to minimize these adverse effects. The incorporation of hollow steel tube reduces the vertical compressive stiffness of the VFS-SPSW, leading to a decrease in the proportion of axial compressive loads transmitted to the steel plate wall from the boundary frame. Consequently, this feature facilitates the installation of VFS-SPSW without the necessity of awaiting the completion of the upper structure. In this paper, finite element (FE) analysis is conducted to obtain a threshold out-of-plane bending stiffness ratio for the stability of the VFS-SPSW. Subsequently, a formula for threshold out-of-plane bending stiffness ratio is proposed, including parameters of the ratio of torsional to bending stiffness and aspect ratio of the subpanel. Then, the anchoring mechanism of hollow steel tube to the tensile field of the steel plate is investigated. The threshold in-plane anchor stiffness ratio is defined to ensure the full development of the tension field in the steel plate. A formula for predicting this ratio is proposed by theoretical and numerical analysis. Finally, the reduction factor of vertical compressive stiffness for the VFS-SPSW at the threshold in-plane anchor stiffness ratio is calculated. The results indicate that the vertical compressive stiffness of the VFS-SPSW, which meets the threshold stiffness design requirements, can be decreased to below 50% of the traditional stiffened SPSW, while ensuring that the reduction in ultimate shear stress remains within the limit of 5%.

Behavior of Steel Plate Shear Walls with Pre-Compression from Adjacent Frame Columns

Experimental study and numerical simulation of seismic performance of stiffened thin steel plate shear walls considering the effect of vertical load on frame column

Analytical Model for Steel Frame-Reinforced Concrete Infill Slit Wall System

ELASTIC STABILITY OF STEEL PLATE SHEAR WALL WITH CROSS STIFFENERS IN SHEAR

Design of Vertically Stiffened Steel Plate Walls under Combined Uniaxial Compression and Shear Loads

STIFFENER STIFFNESS AND ELASTIC BUCKLING STRESS OF STEEL PLATE SHEAR WALL

Design of horizontal stiffeners for stiffened steel plate walls in compression

Shear Stability and Resistance Design of Novel Vertically-Flexible Stiffened Steel Plate Shear Walls

Effects on Structural Behavior of Steel Plane Shear Wall(SPSW) with Opening Considering Axial Compression of the Column During Construction

Experimental Study of Steel Plate Composite Shear Wall Units under Cyclic Load

Numerical study of steel plate shear walls with diverse construction configurations

Shear Resistance of Stiffened Steel Corrugated Shear Walls

Compressive Behavior of Slender Profiled Double-Skin Composite Walls

Experimental study on three types of steel plate shear walls under cyclic loading

Characteristics of the wall–frame interaction in steel plate shear walls

An Overview of Current State-of-the-art in Behavior and Design Theory for Unstiffened or Buckling-Restrained Steel Plate Shear Walls

Interaction behaviour of buckling-restrained steel plate shear wall and boundary composite frame

Seismic Analysis and Design of Composite Shear Wall with Stiffened Steel Plate and Infilled Concrete

Experimental and Numerical Investigation of Cross-Shaped Buckling-Restrained SPSWs with Composite Structure

The Analysis of Lateral Displacement Target of Unstiffened Steel Plate Shear Wall Based on the Performance Designing

Shear Resistance Design of Prefabricated Corrugated Steel Plate Shear Walls with Reinforced Boundary Elements