Abstract:Conventional stator–magnet moving-iron transverse-flux linear oscillatory machines (CSMTLOMs) are widely applied in directly-drive reciprocating devices due to the merits of easy fabrication and robust mover. However, in order to keep the mover vibrating at a certain resonance frequency to save the energy and enlarge the output power, they still suffer from a higher requirement on spring stiffness due to their thick and heavy mover core, which would also narrow the frequency band with a high power factor due to the large inertial energy storage of the heavy mover. Hence, to reduce the mover core weight to reduce the demand of the spring and improve the operation performance, an improved linear oscillatory machine featured by a spoke-type interior permanent magnet inner stator (ISMTLOM) is proposed. Benefiting from its separated two stators, the tangential flux in the radial plane can return through the inner stator core, so that the yoke of the mover core can be eliminated directly. Then, to analytically investigate the influence of the special axial local saturation effect, the segmental equivalent magnetic circuit (EMC) model of the ISMTLOM is established, wherein a saturation coefficient is introduced to quantitatively consider the local saturation effect on the output force. Consequently, several important size parameters are optimally selected when keeping the same outer diameter and copper loss as that of the CSMTLOM. Afterward, the three-dimension finite element algorithm (3D FEA) is adopted for the electromagnetic performance validation and comparison. Finally, it is found that the nonlinear segmental EMC corrected by the saturation coefficient can quickly predict the output force more accurately within the wide load range, and benefiting from the topology improvement, the ISMTLOM has the merits over the CSMTLOM in its smoother output force, much lighter mover core, and less demand of mechanical spring stiffness, whilst preserving the similar output force density.

Design and Analysis of A Tubular Linear Oscillating Motor for Directly-Driven Eha Pump

Design and Analysis of an Improved Halbach Tubular Linear Motor with Non-Ferromagnetic Mover Tube for Direct-Driven EHA

Design and Analysis of Linear Oscillating Motor for Linear Pump Application-Magnetic Field, Dynamics and Thermotics

Design of A Tubular Linear Oscillating Motor with A Novel Compound Halbach Magnet Array

Hybrid Thermal Modeling Of Tubular Linear Oscillating Motor Based On Sectionalized Equivalent Thermal Circuit

Modeling and Optimization for Submersible Pump Tubular Linear Motor Based on Dynamic Load Analysis

Design And Analysis Of A Direct Load Sensing Electro-Hydrostatic Actuator

Structure Innovation and Material Optimization of Annular Linear Induction Electromagnetic Pump Based on Temperature Field Constraints

Design of A Novel Permanent Magnet Linear Synchronous Motor with Segmented Armature Core for Ropeless Lifter

Design of Novel Double-Layer Compound Stator for Tubular Linear Oscillating Motor

Design and Optimization of Self-Compensation Oil Distributor for Hydraulic Motors

Modeling and Experimental Analysis of the Single-Shaft Coaxial Motor-Pump Assembly in Electrohydrostatic Actuators

Design and Test of a Novel Servo Linear Pump

Modeling and Analysis of a Novel Stator-Magnet Moving-Iron Linear Oscillatory Motor

Electromagnetic Design and Analysis of a Stator–Magnet Transverse Flux Linear Oscillatory Machine with Yokeless Mover Core

Analytical Study of Magnetic Field Considering Circumferential Mover Gaps in Tubular Linear Oscillating Motor

Thermal optimization of a tubular linear oscillating motor for directly driven LEHA application

Design and Simulation of Linear Motor Pumping Unit

Design and Optimization of a Permanent Magnet Synchronous Motor for a Two-Dimensional Piston Electro-Hydraulic Pump

Electromagnetic Design of Single-Phase Permanent Magnet Linear Oscillation Actuator Considering Detent Force Minimum

Analytical Modeling of Linear Oscillating Motor with A Mixed Method Considering Saturation Effect