Abstract:Dissimilar lap joining of AZ31B Mg alloy to Cu-Ni coated Ti-6Al-4V was carried out by laser welding-brazing method. The effect of Cu and Ni contents on interfacial reaction and joint fracture load were analyzed. For the joint in which the Ni coating (15.36 mu m) was thicker than the Cu coating (5.47 mu m), thick intermetallic compound (IMC) composed of a mixture of light gray Al-Ni-Ti + Ti3Al + Ti2Ni phases mingled with dark gray Ti3Al was produced at the interface. In comparison, a mixed interfacial reaction layer consisted of Ti2Ni and Ti3Al was formed from the direct irradiation zone to the weld toe zone of the joint with comparable Ni and Cu coating thicknesses (10.78 mu m Cu-9.30 mu m Ni). In this case, the thickness of the mixed layer was below the critical thickness of 10 mu m. For the joint in which the Cu coating is much higher than the Ni coating thickness (17.12 mu m Cu-4.23 mu m Ni), Ti3Al and Ti2Ni mixed reaction layer was produced at the brazed interface of direct irradiation zone, whereas, only Ti3Al phase was formed at the middle zone. At the weld toe zone, Ti2Cu uneven interfacial reaction layer was evolved. With increasing Cu and decreasing Ni coating thicknesses, the fracture load first increased and then slightly decreased, the maximum tensile-shear fracture load attained 2020 N for joints with comparable Cu and Ni coating thicknesses. This is twofold higher than that of uncoated joint. The tensile-shear investigation showed that the joint would fracture at the fusion zone when the coating thickness of Ni was comparable or higher than Cu. In contrast, interfacial failure was observed when the thickness of Cu was much higher than the Ni. For the joint with interfacial failure mode, tear ridge was observed from the fracture surface, whereas, the fusion zone fracture surfaces was noted to display a typical dimple feature.

Intermediate Layer Characterization and Fracture Behavior of Laser-Welded Copper/aluminum Metal Joints

Microstructure Characterization and Mechanical Properties of Laser-Welded Copper and Aluminum Lap Joint

Microstructural characteristics and mechanical properties of laser-welded copper and aluminum

Effect of process parameters on microstructure and properties of laser welded joints of aluminum/steel with Ni/Cu interlayer

Tensile resistance, microstructures of intermetallic compounds, and fracture modes of welded steel/aluminum joints produced using laser lap welding

Unravelling Asymmetrical Microstructure Evolution and Tensile Fracture Mechanism in Laser Welding of Dissimilar 2219/2195 Aluminum Alloys

Interfacial microstructure and reaction mechanism with various weld fillers on laser welding-brazing of Al/Cu lap joint

Microstructures and Mechanical Behavior of Aluminum-Copper Lap Joints

Study of the Brittleness Mechanism of Aluminum/steel Laser Welded Joints with Copper and Vanadium Interlayers

Formation Mechanism and Control of Solidification Cracking in Laser-Welded Joints of Steel/Copper Dissimilar Metals

Microstructural, Porosity and Mechanical Properties of Lap Joint Laser Welding for 5182 and 6061 Dissimilar Aluminum Alloys under Different Place Configurations

The Microstructures and Mechanical Properties of Dissimilar Laser Welding of Copper and 316L Stainless Steel with Ni Interlayer

The Influence of Adjustable Ring-Mode Laser on the Formation of Intermetallic Compounds and Mechanical Properties of Ultra-Thin Al-Cu Lap Welded Joints

Laser pressure welding of dissimilar aluminium and copper: microstructure and mechanical property

Effect of lap configuration on the microstructure and mechanical properties of dissimilar ultrasonic metal welded copper-aluminum joints

Effect of Copper-Nickel Interlayer Thickness on Laser Welding-Brazing of Mg/Ti Alloy

Microstructures and Mechanical Properties of Ti<sub>3</sub>Al-Nb/SUS301L Laser-Welded Joint with V and Cu Interlayer

Effects of Different Types of Interlayers on the Interfacial Reaction Mechanism at the Cu Side of Al/Cu Lap Joints Obtained by Laser Welding/Brazing

Microstructure Evolution and Mechanical Properties of Friction Stir Spot Welded Dissimilar Aluminum-Copper Joint

Effect of Welding Speed on Microstructural Evolution and Mechanical Properties of Laser Welded-Brazed Al/brass Dissimilar Joints

Effect of Cu/Ni Foil Interlayer on Microstructure and Mechanical Properties of Laser Welded Aluminum/steel Joints