Abstract:In this study, the amorphous C, ZrB2 and BN single-layer coatings as well as C/BN, C/ZrB2, ZrB2/BN and C/ZrB2/BN composite-coatings were prepared on SiCf by an in-situ synthesis and solution impregnation-pyrolysis method. Subsequently, SiCf/SiBCN composites were fabricated by hot-pressing sintering at 1900 ℃/60 MPa/30 min to explore the influence of different coatings on the microstructure and mechanical performance of resulting composites. After preparation of single-layer coated SiCf, the SiCf(BN) or SiCf(ZrB2) tended to be overlapped with each other, while the dispersion of amorphous C coated SiCf was satisfying. Besides, some uneven areas and attached particles have appeared on fiber surfaces of the SiCf(BN) or SiCf(ZrB2), whereas smooth and dense surfaces of amorphous C coated SiCf were observed. Since the uniformity of ZrB2 coatings can be partially damaged by the subsequent coating process of BN, the composite-coatings of ZrB2/BN and C/ZrB2/BN were thereby not suitable for strengthening SiBCN matrix. The SiCf/SiBCN composites with C/ZrB2 coatings have desirable comprehensive mechanical properties. Nevertheless, the conventional toughening mechanisms like fiber pull-out and bridging, and crack deflection are not available for these composites since the serious crystallization of SiCf leading to great strength loss, resulting in catastrophic brittle fracture.

Strengthening/toughening of 2D C/SiC Composites by Coating

Influence of SiC Coating Thickness on Mechanical Properties of SiCf/SiC Composite

Mechanical Behavior of SiCf/SiC Composites with Alternating PyC/SiC Multilayer Interphases

Effect of the Incorporation of SiC Nanowire with Double Protective Layers on SiC Coating for C/C Composites

Improved antioxidative and mechanical properties of SiC coated C/C composites via a SiO2-SiC reticulated layer

Interfacial modification and oxidation resistance behavior of a CVD-SiC coating for C/SiC composites

Synthesis of coatings on SiC fibers and their effects on microstructure and mechanical properties of SiC f /SiBCN composites

Effect of SiC content on the mechanical behaviour of a three-dimensional needled C/SiC composite

Strengthening and toughening of Ti 5 Si 3 by TiC-coated short carbon fiber: Fabrication, interfacial control, and mechanism of reinforcement

Influence of Si and SiC Coating on the Microstructures and Mechanical Properties of C/C Bolts

In-situ SiC nanowires reinforced SiC-based multicomponent ceramic coating for protecting SiOC/CF composites

Enhanced strength and toughness of SiC/C composite ceramics via SiC@graphene core–shell nanoparticles

A Morphological Study and Effect of Intermediate Phase Formation on Hard and Wear Resistant SiC-Co Composite Coating on Low Carbon Steel via Arc Based Heat Source

Preparation and mechanical behaviors of multiscale SiC nanowires/carbon fiber reinforced silicon oxycarbide ceramic composites

Interfacial Reactions and Mechanical Properties Studies of C-Coated and C/B4C Duplex-Coated SiC Fiber-Reinforced Ti2AlNb Composites

Siliconization elimination for SiC coated C/C composites by a pyrolytic carbon coating and the consequent improvement of the mechanical property and oxidation resistances

Mechanical and thermal shock properties of C f /SiBCN composite: Effect of sintering densification and fiber coating

Low residual stress SiC coatings on C/CA composites by a strategy of matching their expansion behaviors to improve thermal shock resistance

Addition of Si3N4 Strengthens SiC Coatings via Heat Treatment with Nitrogen Gas onto Carbon/Carbon Composites

Damage Mechanism Analysis to the Carbon Fiber and Fiber-Ceramic Interface Tailoring of Cf/ZrC-SiC Using PyC Coating

Self-densification behavior, interfacial bonding and cyclic ablation resistance of HfSi2-ZrSi2 modified SiC/ZrB2-SiC/SiC coating for Cf/SiC composite