Abstract:Kaolinite-urea intercalation complex was prepared using kaolinite as intercalation host and urea as intercalating agent. The kaolinite-urea intercalation complex was used as precursor to prepare exfoliated kaolinite by deintercalating urea molecules from the interlayers of kaolinite through ultrasonic treatment. X-ray diffraction (XRD) and scanning electron microscopy (SEM) were used to characterize the as-prepared exfoliated kaolinite. A broad 001 diffraction of kaolinite with weak intensity showed the random orientation of kaolinite platelets. SEM micrograph confirmed the exfoliation of kaolinite particles with layer thickness of no more than 50 nm. The exfoliated kaolinite particles were used as filler to poly(ethylene-oxide)/LiClO4 (PEO/LiClO4) system to prepare PEO/kaolinite composites, with the aim to improve the ion conductivity and mechanical property of the PEO matrix. SEM, transmission electron microscopy (TEM), XRD and Fourier transform infrared spectroscopy (FTIR) were used to characterize the PEO/kaolinite composites. SEM and TEM micrographs exhibited a good dispersion of exfoliated kaolinite in PEO matrix. XRD results showed that the crystallinity of PEO was gradually decreasing with increased exfoliated kaolinite content. FTIR analysis indicated that the hydrogen bonding was formed between the oxygen atoms of PEO segments and the hydroxyl groups on kaolinite surface, and this interaction between PEO and kaolinite was beneficial to the decrease in crystallinity of PEO. In order to evaluate the effect of the exfoliated kaolinite on ion conductivity and mechanical property of PEO matrix, AC impedance measurement and mechanical test were carried out. The results indicated that the ion conductivity of the composites gradually increased with increased exfoliated kaolinite content and reached 6.0 x 10(-5) S/cm at filler concentration of 20 wt%. The formation of amorphous region around the exfoliated kaolinite was beneficial for the Li+ ion conduction in PEO matrix. When the exfoliated kaolinite content reached 10 wt%, the formed amorphous regions were connected to each other to form a network for the transport of Li+ in the interconnected amorphous regions, leading to a sharp increase in ion conductivity. Moreover, the prepared composites under different drying temperature exhibited different ion conductivity. The reason was attributed to the change of PEO crystallinity with drying temperature, and the change trend of the ion conductivity was consistent with that of PEO crystallinity. Under the drying temperature of 95 degrees C, the as-prepared composite possessed high ion conductivity (6.8 x 10(-5) S/cm). In addition, the Young's modulus and tensile strength of the composites were improved because of the introduction of the exfoliated kaolinite into EPO matrix. The composites showed the maximal increase of 256% and 121% in Young's modulus and tensile strength, i.e., to 165.1 MPa and 6.743 MPa respectively, compared to PEO/LiClO4 (46.3 and 3.047 MPa). Therefore, the exfoliated kaolinite was a promising filler to prepare PEO based polymer electrolyte.

Preparation and properties of poly(2,3-dimethylaniline)/organic-kaolinite nanocomposites via in situ intercalative polymerization

In-situ Synthesis, Thermal and Mechanical Properties of Biobased Poly(ethylene 2,5-Furandicarboxylate)/montmorillonite (PEF/MMT) Nanocomposites

In Situ Polymerization of Poly(methyl Methacrylate)/clay Nanocomposites in Supercritical Carbon Dioxide

Characterization And Anticorrosive Properties Of Poly(2,3-Dimethylaniline)/Na1-Montmorillonite Composite Prepared By Emulsion Polymerization

Characterization and Anticorrosive Properties of Poly(2,3-Dimethylaniline)/na+-montmorillonite Composite Prepared by Emulsion Polymerization

The Role of Exfoliated Kaolinite on Crystallinity, Ion Conductivity, Thermal and Mechanical Properties of Poly(ethylene Oxide)/kaolinite Composites

Synthesis and anticorrosion property of poly(2,3-dimethylaniline)/organic-attapulgite nanofibers via self-assembling and graft polymerization

Preparation and Characterization of Poly(ethylene-oxide)/Kaolinite Composite Electrolyte

Formation of 0.84 Nm Hydrated Kaolinite as an Environmentally Friendly Precursor of a Kaolinite Intercalation Compound

Development of Polymer/Kaolinite Nanocomposites

Synthesis of Polymer Montmorillonite Nanocomposites Byin Situintercalative Polymerization

Preparation and characterization of poly(propylene carbonate)/montmorillonite nanocomposites by solution intercalation

Preparation and Thermal Properties of Poly(2,3-dimethylaniline)/ZrO2 Composite

Preparation and Anticorrosion Property of Poly(2,3-Dimethylaniline) Modified by Nano-Sio2

Polypropylene/montmorillonite nanocomposites I. Preparation, characterizsation and dynamic mechnical properties

Preparation and Characterization of Poly(Vinyl Chloride)/Organoclay Nanocomposites by in Situ Intercalation

Novel polyacrylonitrile/Na-MMT/silica nanocomposite: Co-incorporation of two different form nano materials into polymer matrix

Intercalated PS/Na+-MMT Nanocomposites Prepared by Ultrasonically Initiated In Situ Emulsion Polymerization

Preparation and properties of poly (methyl methacrylate) nanocomposites

Novel polyacrylonitrile nanocomposites containing Na-montmorillonite and nano SiO2 particle

Preparation and performance study of polyurethane/ kaolinite nanocomposite insulation materials