Abstract:In this study, three cationic surfactants (hexadecyltrimethylammonium chloride, hexadecyldimethylbenzylammonium chloride, and octadecyltrimethylammonium chloride) were used to modify montmorillonite and polyethylene (PE)/maleic anhydride grafted polyethylene (PE-g-MAH)/organic-montmorillonite (Org-MMT) nano-composites, prepared by two blending processes (direct-melt blending and solution blending). X-ray diffractometry and transmission electron microscopy were used to investigate the intercalation behavior and microstructure of composites. Mechanical properties were also tested. It was found that the intercalation effect of PE/PE-g-MAH/Org-MMT could be enhanced by increasing the content of PE-g-MMT, using the silicate modified by a cationic surfactant with a benzyl group or long alkyl chain, adopting the solution-blending method or using high-density polyethylene as matrix. The degree of crystallinity of composites and the crystalline thickness perpendicular to the crystalline plane [like (110) and (200)] decreased with increasing amounts of PE-g-MAH and, under certain prescription, the crystalline thickness of the composite made by the solution method was much smaller than that made by direct-melt blending. This clearly showed that Org-MMT and PE-g-MAH had a heterogeneous nucleation effect on crystallization of PE from the melt, resulting in a decrease of crystalline thickness, and the heterogeneous nucleation effect was more evident in the nanocomposite made by the solution-blending method than in that made by the direct-melt intercalation process. The tensile strength initially increased and then decreased with increasing contents of PE-g-MAH. The maximum value in tensile strength (23.3 MPa) was achieved when the concentration of PE-g-MAH was 6 wt %. The impact strength increased concomitantly with the content of PE-g-MAH; it was 122.2 J/m when the concentration of PE-g-MAH was 9 wt %. (C) 2004 Wiley Periodicals, Inc.

Characterization And Anticorrosive Properties Of Poly(2,3-Dimethylaniline)/Na1-Montmorillonite Composite Prepared By Emulsion Polymerization

Preparation and Characterization of Polyaniline/Mmt Conductive Composites

Effect of Surface Modification of Montmorillonite on the Properties of Rigid Polyurethane Foam Composites

Effect of the Phosphorus–Nitrogen-Containing Quaternary Ammonium Salt Structure on the Flammability Properties of Poly(methyl Methacrylate)/montmorillonite Nanocomposites

Polyethylene/maleic Anhydride Grafted Polyethylene/organic‐montmorillonite Nanocomposites. I. Preparation, Microstructure, and Mechanical Properties

In-situ AFM and EIS study of a solventborne alkyd coating with nanoclay for corrosion protection of carbon steel

Nanoclay, intumescent flame retardants, and their combination with chemical modification for the improvement of the flame retardant properties of polymer nanocomposites

Mechanical and corrosion protection properties of polymer–clay nanocomposite coatings for mild steel in marine environment

Preparation and Corrosion Resistance of OMMT/EP Composite Coatings in Sulfur-Containing Sodium Aluminate Solution

Enhanced anticorrosion property of epoxy resin membrane by nano-organic montmorillonite

Influence of the Addition of Montmorillonite in an Epoxy Powder Coating Applied on Carbon Steel

Nano Na-Montmorillonite @ Polyaniline Hybrid Composite: Effect of Nano Na-Montmorillonite Content on Structure, Thermal Stability and Electrical Properties

Extraction of accurate structure-factor amplitudes from Laue data: wavelength normalization with wiggler and undulator X-ray sources.

Poly(amic Acid)–clay Nacrelike Composites Prepared by Electrophoretic Deposition

Nano MgFe2O4 Incorporated PAn Hybrid Composite Containing Nano Montmorillonite: Effect of Nano MgFe2O4 Content on Structure, Thermal Stability, Electrical and Magnetic Properties

Advanced fabrication and characterization of AMMT nano clay reinforced tri-functional epoxy nanocomposites for superior thermal and mechanical properties

Polyimide/montmorillonite nanocomposites based on thermally stable, rigid-rod aromatic amine modifiers

Preparation and Characterization of Polymer-Clay Nanocomposite Films

Anticorrosive Properties of Oligoaniline Containing Photocured Coatings

A Novel Method for Manufacturing High‐Performance Layered Silicate/Epoxy Nanocomposites Using an Epoxy–Diamine Adduct to Enhance Compatibility and Interfacial Reactivity

Enhancement of active anti-corrosion properties of waterborne epoxy resin by mussel bionic modified halloysite nanotube