Abstract:In this article, structurally feasible aniline oligomers such as amine-capped trimer (DCTA) and tetramer (DCTAni) were synthesized and used as curing agents for coatings derived from epoxidized cardanol (ECD) and DGEBA (diglycidyl ether of bisphenol A). These two epoxies were optimized to an 80:20 (ECD: DGEBA) ratio to ensure that the coating system has a higher ECD content. The coatings (DCTA 20, DCTA 10, DCTA 5, DCTAni 20, DCTAni 10, and DCTAni 5) were formulated with different ratios of DCTA, and DCTAni with 20, 10, and 5 wt% ratios with respect to BDA (1,4-butane diamine). To evaluate the corrosion resistance of these coatings, steel panels were coated and exposed to a standard 3.5 % NaCl saline solution. Tafel polarization studies revealed that 20 wt% of DCTA/DCTAni provided excellent anti-corrosion properties, with a corrosion rate (C R ) of 3.162 × 10 −6 and substantial improvement in polarization resistance (Rp) up to 128.32 MΩ. Furthermore, EIS analysis demonstrated that the coatings exhibited a maximum charge transfer resistance (R ct ) of 72 MΩ, and 94 MΩ for DCTA-20, and DCTAni -20, respectively. The coatings sustained for 500 h of salt-spray test demonstrated the high performance of these coatings. Mechanical strength and storage modulus were assessed using UTM and DMTA, revealing significantly improved results. Thermal analysis showed improved thermal stability of the epoxy coatings when the BDA percentage was reduced with DCTA/DCTAni and improved glass transition (T g ) temperature. Epoxy coatings on MS (mild steel) panels exhibited excellent abrasion resistance and adhesion to the substrate.

Anticorrosive Properties of Oligoaniline Containing Photocured Coatings

Synthesis and Electrochemical Properties of Electroactive Hyperbranched Poly(Aryl Ether Ketone) Bearing Oligoaniline Segments

Anticorrosion Performance of TiO2/Epoxy Films with Doped Polyaniline and Poly(o-ethoxyaniline) Applied to Carbon Steel in 3.5 wt % NaCl Acid Solution

Electroactive Polyurea Bearing Oligoaniline Pendants: Electrochromic and Anticorrosive Properties

Poly(Aryl Ether) Bearing Electroactive Tetraaniline Pendants And Allyl Groups: Synthesis, Photo-Crosslinking And Electrochemical Properties

Corrosion Protection of Q235 Steel Using Epoxy Coatings Based on Polyaniline Loaded with Benzotriazole

Synthesis and Tunable Properties of Oligoaniline-Functionalized Polyamides

Synthesis and anticorrosive properties of a novel electroactive polyurea containing oligoaniline pendants

Synthesis and Characterization of Polyaniline-Based Polymer Nanocomposites as Anti-Corrosion Coatings

Electronic effects on protective mechanism of electropolymerized coatings based on N-substituted aniline derivatives for mild steel in saline solution

Polyaniline/epoxy coatings with good anti-corrosion properties

Development of polyaniline/chitosan (PANI/CTS) and TiO2-PANI/CTS nanocomposites as anti-corrosion coatings: Synthesis and characterization

Preparation of Environmentally Friendly Anticorrosive Coatings with Aniline Trimer-Modified Waterborne Polyurethane

Leveraging polyaniline grafted micaceous iron oxide as a dual active-barrier pigment for anti-corrosion polymer coatings

Anti-corrosion studies on cardanol epoxy coatings cured with redox-active aromatic trimer and tetramer oligoanilines

Corrosion Protective Coatings from Poly(heterocyclic diphenylamine): Polyaniline Analogues

Halloysite nanotubes-enhanced epoxy acrylate latex emulsion as a novel anticorrosive protective coating for metal surface in 3.5% NaCl solution

Preparation of Polyaniline/Epoxy Composite and Its Anti- Corrosion Performance

Anticorrosive oligoaniline-containing electroactive siliceous hybrid materials

Improving the Protection Performance of Waterborne Coatings with a Corrosion Inhibitor Encapsulated in Polyaniline-Modified Halloysite Nanotubes

Studies of different acid doped polyaniline incorporated into epoxy organic coatings on the Mg alloy