Abstract:Eight typical LiMnPO4 nanocrystals with tunable morphologies have been controllably synthesized by varying the feeding sequence and the ratio of the reactants in an EG-assisted solvothermal approach. It is found that with the decrease of the OH− concentration induced by the primary LiOH/H3PO4 ratio, the predominately exposed planes of LiMnPO4 evolve from (010) for nanospindles to (100) for nanoplates in Li–P–Mn feeding sequence, and to both (010) and (100) for nanorods in Mn–P–Li feeding sequence. Further decrease of the OH− concentration hardly affects the formation of pure-phase LiMnPO4 but results in significant changes in the morphology with distinctly increased particle size. The electrochemical properties of the corresponding LiMnPO4/C composites are remarkably dependent on their particle size. By applying the Mn–P–Li sequence and the LiOH/H3PO4 ratio of 2.7–3.0, the as-prepared LiMnPO4/C nanorods exhibit superior rate capability (more than 105mAhg−1 at 10C) and remarkable cycling stability (a capacity retention of up to 93% after 100 cycles at 0.5C) among all the samples, owing to their small length of less than 60nm along the [010] direction. The results also confirm that excess LiOH amount is indeed required to yield LiMnPO4 crystals with small particle size and attractive electrochemical properties.

Ordered Limpo4 ( M = Fe, Mn) Nanorods Synthesized From Nh4mpo(4)Center Dot H2o Microplates By Stress Involved Ion Exchange For Li-Ion Batteries

Hydrothermal Synthesis of Monodispersed LiMnPO4 (010) Nanobelts and [001] Nanorods and Their Applications in Lithium-Ion Batteries

Ascorbic Acid-Assisted Solvothermal Synthesis of LiMn 0.9 Fe 0.1 PO 4 /C Nanoplatelets with Enhanced Electrochemical Performance for Lithium Ion Batteries

Hydrothermal Synthesis of Monodispersed LiMnPO4 (010) Nanobelts and [001] Nanorods and Their Applications in Lithium-Ion Batteries: Hydrothermal Synthesis of Monodispersed LiMnPO4 (010) Nanobelts and [001] Nanorods and Their Applications in Lithium-Ion Batteries

Hydrothermal Synthesis of Stamen-Like Limnpo4 Nanostructures Self-Assembled with [001]-Oriented Nanorods and Their Application in Li-Ion Batteries

Hydrothermal Synthesis of Flower-Like LiMnPO4nanostructures Self-Assembled with (010) Nanosheets and Their Application in Li-ion Batteries

Controllable Synthesis of Limnpo4 Nanocrystals: Morphology Evolution and Their Size-Dependent Electrochemical Properties

High-performance LiMnPO4 nanorods synthesized via a facile EG-assisted solvothermal approach

Controllable preparation of nanosized LiMnPO4/C with rod‐like morphology by hydrothermal method with excellent electrochemical performance

Facile Synthesis of Carbon-Limnpo4 Nanorods with Hierarchical Architecture As a Cathode for High-Performance Li-ion Batteries

Controllable Synthesis and Morphology Evolution of Hierarchical LiFePO4 Cathode Materials for Li-ion Batteries

LiMn2O4 Nanorods, Nanothorn Microspheres, and Hollow Nanospheres as Enhanced Cathode Materials of Lithium Ion Battery

Synthesis of flower-like LiMnPO 4/C with precipitated NH 4MnPO 4·H 2O as precursor

Deep Eutectic Solvent Synthesis of LiMnPO4/C Nanorods as a Cathode Material for Lithium Ion Batteries

Preparation of Nano-Structured Lifexmn1-Xpo4 (X=0, 0.2, 0.4) by Reflux Method and Research on the Influences of Fe(Ii) Substitution

Solvothermal-assisted Morphology Evolution of Nanostructured LiMnPO 4 As High-Performance Lithium-Ion Batteries Cathode

LiMPO4 and Derived NaMPO4 (M = Mn, Fe, Mg) with Excellent Electrochemical Properties for Lithium/sodium Ion Batteries

Electrochemical Performance of Nanocrystalline Limpo4 Thin-Films Prepared by Electrostatic Spray Deposition

Synthesis of Electrochemically Active LiMnPO4 Via MnPO4·H2O with Different Morphology Prepared by Facile Precipitation

Synthesis of Nano-Sized Limnpo4 and in Situ Carbon Coating Using A Solvothermal Method

LiMn1-xFexPO4 Nanorods Grown on Graphene Sheets for Ultra-High Rate Performance Lithium Ion Batteries