Abstract:Diverse single crystalline spinel LiMn2O4 cathode materials are derived from spherical and cubic MnCO3 precursors using a general pH-mediated chemical precipitation approach. With careful pre-controls over the particle properties of the MnCO3 precursors upon pH adjustment, five LiMn2O4 samples with an average size of 0.5–1.0 μm are obtained. Among these samples, the LiMn2O4 prepared at a pH value of 7.0 exhibits a well-defined truncated octahedral crystal structure in which most surfaces are aligned to the {111} crystalline orientations with minimal Mn dissolution, whereas a small portion of the structure is truncated along the {110} orientations to support Li diffusion. Benefiting from the unique crystal structure, the synthesized LiMn2O4 cathode manifests superior rate capability and prolonged cycle stability, especially at elevated temperatures with a capacity retention of 86.7% after 1000 cycles at 5 C under 25 °C and of 80.7% after 250 cycles at 1 C under 55 °C. These results demonstrate that the morphology of the MnCO3 precursor obtained by using the precipitation method has a significant influence on the crystal structure and electrochemical properties of resultant LiMn2O4. The work described here also shows a great potential in practical industrial applications aimed towards developing high performance LiMn2O4 electrode materials for lithium ion batteries.

Synthesis of Electrochemically Active LiMnPO4 Via MnPO4·H2O with Different Morphology Prepared by Facile Precipitation

Ascorbic Acid-Assisted Solvothermal Synthesis of LiMn 0.9 Fe 0.1 PO 4 /C Nanoplatelets with Enhanced Electrochemical Performance for Lithium Ion Batteries

High-performance Carbon-Coated LiMnPO4 Nanocomposites by Facile Two-Step Solid-State Synthesis for Lithium-Ion Battery

Preparation of Submicrocrystal LiMn2O4 Used Mn3O4 As Precursor and Its Electrochemical Performance for Lithium Ion Battery

Hydrothermal Synthesis of Flower-Like LiMnPO4nanostructures Self-Assembled with (010) Nanosheets and Their Application in Li-ion Batteries

Synthesis of Nano-LiMnPO4 from MnPO4·H2O Prepared by Mechanochemistry

Facile pH-mediated synthesis of morphology-tunable MnCO3 and their transformation to truncated octahedral spinel LiMn2O4 cathode materials for superior lithium storage

Preparation of High Performance Carbon-Coated LiMnPO4 Nanocomposite by an Acetate-Assisted Antisolvent Precipitation Method

Hydrothermal Synthesis of Monodispersed LiMnPO4 (010) Nanobelts and [001] Nanorods and Their Applications in Lithium-Ion Batteries

Solvothermal-assisted Morphology Evolution of Nanostructured LiMnPO 4 As High-Performance Lithium-Ion Batteries Cathode

Hydrothermal Synthesis of LiMn0.79Fe0.2Mg0.01PO4/C Composite Cathode Materials Using Different Li3PO4 Precursors

Synthesis and Electrochemical Performance of LiMnPO4by Hydrothermal Method

Synthesis of flower-like LiMnPO 4/C with precipitated NH 4MnPO 4·H 2O as precursor

Effective New Co-Precipitation Method for Preparing Pure or Ti-Doped LiMn2O4 for Use in Lithium-Ion Batteries

Shape-controlled Synthesis of LiMnPO4 via a Hydrothermal Route and Its Electrochemical Behavior in Lithium Ion Batteries

Synthesis Of Limnpo4 Microspheres Assembled By Plates, Wedges And Prisms With Different Crystallographic Orientations And Their Electrochemical Performance

Synthesis of Nano-Sized Limnpo4 and in Situ Carbon Coating Using A Solvothermal Method

Solvothermal Synthesis of Nano-Limnpo4 from Li3po4 Rod-Like Precursor: Reaction Mechanism and Electrochemical Properties

Controllable preparation of nanosized LiMnPO4/C with rod‐like morphology by hydrothermal method with excellent electrochemical performance

Controllable Synthesis Of High-Performance Limnpo4 Nanocrystals By A Facile One-Spot Solvothermal Process

Electrochemical Study on LiMn2O4 As Cathode Material for Lithium Ion Batteries