Abstract:A novel modification method was proposed to carry out efficient and continuous long‐chain branching of polyamide 6, so as to provide more abundant functions for polyamide 6 materials. To improve melt strength and toughness of polyamide 6 (PA6), an on‐line UV radiation method is introduced into reaction extrusion to induce free radical reaction for efficient preparation of long‐chain branched PA6 materials. Trimethylolpropane triacrylate and glycidyl methacrylate are adopted as chain extenders to synergistically introduce long‐chain branches onto PA6 macromolecules. Gel permeation chromatography results show the increase of molecular weight of PA6, implying the successful graft of chain extenders onto molecular chains. Based on rheological measurement results, modified PA6 exhibits better melt strength than pure PA6 owing to a larger storage modulus. The elongation at break and impact strength of modified PA6 at T1G1 are about 5.3 and 2.2 times those of pure PA6, respectively, without sacrificing tensile strength. According to Fourier transform infrared spectroscopy results, we propose reaction mechanisms between trimethylolpropane triacrylate/glycidyl methacrylate and PA6 under on‐line UV radiation. This study offers a practical approach for the efficient preparation of long‐chain branched PA6, thereby broadening the potential applications of the material. Highlights An on‐line UV radiation method is introduced into reaction extrusion. The melt strength and toughness of polyamide 6 are realized simultaneously at low cost. The synergistic effect mechanism of trimethylolpropane triacrylate and glycidyl methacrylate is proposed. Provides a feasible way to efficiently prepare long‐chain branched polyamide 6.

In Situ Ester-Amide Exchange Reaction Between Polyamide 6 and Ethylene-Vinyl Acetate Rubber During Melt Blending

Study on ester-amide exchange reaction between PBS and PA6IcoT

Synergetic Effect of a Reactive Compatibilizer and Organo-montmorillonite on the Dispersion of Polyamide 6 /Polydimethylsilicone Blend with a High Viscosity Ratio

Synthesis of novel poly(aminophosphonate ester)s flame retardants and their applications in EVA copolymer

Effect of compatibilizer and polyhedral oligomeric silsesquioxane on mechanical, thermal, and morphological properties of polyamide6/poly (ethylene-co-vinyl acetate) composites

Reactive processing of PA6/EPDM‐MA blends as modifier for application and development of high‐performance polypropylene

Periodic Ethylene-Vinyl Alcohol Copolymers Via ADMET Polymerization: Synthesis, Characterization, and Thermal Property

Preparation and Characterization of Graft Copolymer EVA-g-PU

TRANSAMIDATION IN THE in Situ BLENDING OF POLYAMIDE 1212 WITH POLYAMIDE 6 THROUGH ANIONIC POLYMERIZATION OF CAPROLACTAM

Thermal–oxidative Degradation and Accelerated Aging Behavior of Polyamide 6/epoxy Resin‐modified Montmorillonite Nanocomposites

IMPROVEMENT OF TOUGHENING AND MECHANICAL PROPERTIES EQUILIBRIUM FOR PA6/VERSIFY BLENDS BY VERSIFY-g-(MAH-co-St)

Reactive Extrusion of Polyamide 6 Using a Novel Chain Extender

Compatibilization Effect of PP-g-(MAH/VAc) on Polypropylene/Polyamide 6 Blends

Facile synthesis of polyamide 6 (PA6)-based thermoplastic elastomers with a well-defined microphase separation structure by melt polymerization

Maleic Anhydride-Grafted Isotactic Polybutene-1 and Modified Polyamide 6

Preparation and characterization of long‐chain branched PA6 by UV‐irradiation of included methacrylate monomers after extrusion

Thermal, mechanical and physical properties of chain extended recycled polyamide 6 via reactive extrusion: Effect of chain extender types

Fabrication of robust polyamide 6 with local cross‐linked structure via dynamic vulcanization

Thermoplastic Elastomeric Blends of Nylon-6/Acrylate Rubber: Influence of Interaction on Mechanical and Dynamic Mechanical Thermal Properties

Microstructures and Mechanical Properties of Polypropylene/polyamide 6/Polyethelene-Octene Elastomer Blends

Synthesis of an Addition-Crosslinkable, Silicon-Modified Polyolefin via Reactive Extrusion Monitored by In-Line Raman Spectroscopy