Abstract:Reinforced concrete (RC) shear walls are the major lateral load-carrying structural components in high-rise buildings. Under strong earthquake motions, the axial loads of RC walls are not constant axial compression, but may be in tension, resulting in the axial load of RC walls varying from compression to tension. In this study, three RC slender wall specimens (shear-to-span ratio λ = 2.0) were tested to study the effect of the fluctuating range and loading patterns of variable axial forces on their cyclic behavior, including failure modes, hysteretic response, strength and deformation capacity. Test results indicated that the final failure of RC slender walls subjected to variable axial forces was controlled by flexural failure in the compressive-flexural direction. The hysteretic curves of RC slender walls were asymmetric and substantively different from the hysteretic curves of RC slender walls with constant axial loads. The fluctuating range of axial forces had a limited influence on the shape of hysteretic curves, while the loading patterns significantly changed the shape of these hysteretic curves. Under the variable axial forces, the lateral strength and deformation capacity of RC slender walls depended on the fluctuating range of axial forces, while loading patterns had limited influence when the fluctuating range of axial forces kept constant. The loading patterns had a limited influence on the lateral stiffness of RC slender walls, while the increase of fluctuating range of axial forces increased the difference between compressive-flexural and tensile-flexural lateral stiffness. No matter in tensile-flexural or compressive-flexural directions, the assumption that the wall section remains plane after deformation is suitable for RC slender walls under the variable axial forces, and enables reasonable estimations of yielding and peak strength. Finally, a finite element model was developed for predicting the cyclic behavior of RC walls under the variable axial loads.

Influence of Creep and Drying Shrinkage of Reinforced Concrete Shear Walls on the Axial Shortening of High-Rise Buildings

Shrinkage and Creep of Sustainable Self-Compacting Concrete with Recycled Concrete Aggregates, Fly Ash, Slag, and Silica Fume

Time-dependent Deformations of Concrete Columns under Different Construction Load Histories

Numerical Analysis of Drying Shrinkage in Long Reinforced Concrete Structure

Time Dependent Strain Development of Early Age Concrete under Step-By-Step Load History

Structural Analysis of High-Rise Reinforced Concrete Building Structures During Construction

Shear behavior of reinforced concrete walls under variable axial tension‐compression and cyclic lateral loads

Simulation and analysis of infilled-wall cracks' development by shrinkage using semi-discrete and whole type model

Shear Behaviour of Reinforced Concrete Structural Walls with Eccentric Openings under Cyclic Loading: Experimental Study

The influence of steel reinforcement on creep and shrinkage of concrete columns

Influences of Shrinkage,Creep,and Temperature on the Load Distributions in Reinforced Concrete Buildings During Construction

Seismic behavior of reinforced concrete slender walls subjected to variable axial loads

Analytical Prediction and Experimental Research on Shrinkage Cracking of Restrained Early-Age Concrete

EXPERIMENTAL INVESTIGATION ON CONCRETE PERFORATED BRICK WALL SHINKAGE AT DIFFERENT AGES

Early-age stress analysis of a concrete diaphragm wall through tensile creep modeling

EXPERIMENTAL AND NUMERICAL ANALYSIS OF EARLY-AGE STRESS IN CONCRETE DIAPHRAGM WALL OF UNDERGROUND STRUCTURES

Decoupling of Autogenous Shrinkage and Tensile Creep Strain in High Strength Concrete at Early Ages

Coupled Axial Tension-Shear Behavior of Reinforced Concrete Walls

Study of the influence of shrinkage, creep and temperature difference on super high-rise structural deformation

Theoretical Method for Predicting the Failure Mode of Reinforced Concrete Shear Walls Subjected to Axial Tension and Cyclic Lateral Loads

Stresses Due To Autogenous Shrinkage And Drying Shrinkage In Hsc And Its Evaluation