Abstract:NiAl intermetallics is considered to be a potential high temperature structural material based on a high melting point, low density, high thermal conductivity, excellent oxidation and hot-corrosion resistance at elevated temperatures [1–4], but its high temperature strength is insufficient for the majority of actual applications. The tensile ductility and fracture toughness at ambient temperatures are often also unsatisfactory [5, 6]. The solid solution strengthening, precipitation strengthening, directional solidification and single crystal technique have been explored to improve its high temperature strength. Although significant progress has been achieved, the ambient tensile ductility and fracture toughness often deteriorate as a result. On the other hand, the ductility and toughness can also be improved by microalloying, macroalloying and plastic secondary phase additions, but this is at the expense of the strength [4–7]. In other words, it is very difficult to compromise its high temperature strength and ambient temperature ductility. This severely restricts its operating temperature and deteriorates its machinability. It is significant to explore novel fabricaturing techniques for NiAl intermetallic alloy to improve its comprehensive mechanical properties. Preparing intermetallic matrix composite is an effective method to produce engineering NiAl intermetallic alloy and to improve its high temperature strength and retain ambient temperature ductility simultaneously [8, 9]. Good ductility can be obtained through adequately alloying the intermetallic matrix while the strength is improved with the reinforcements. The casting, combustion synthesis, powder metallurgy and mechanical alloying are major methods for preparing NiAl intermetallic matrix composites. Nevertheless, in many cases, the mechanical bonding due to no interfacial reaction, or the brittle reactive products existing at the interface between matrix and reinforcement due to excessive interfacial reaction often result in weak interfacial bonding so that whole properties

Effect of Pre-Oxidation of TiNi Fibers on the Interfacial and Mechanical Property of TiNif/Al Composite

Microstructure of Multilayer Interface in an Al Matrix Composite Reinforced by TiNi Fiber.

Effect of Tin Coating on Microstructure of Ti-F/Al Composite

The Oxidation Behaviour of Tic Matrix Ni3al and Fe40al Toughened Composites at High Temperatures

High temperature oxidation behavior of Ti2AlN/TiAl composite

Mechanical Properties and Oxidation Characteristics of TiNiAl(Nb) Intermetallics

The effect of nickel coating on the mechanical properties and failure modes of continuous carbon fiber reinforced aluminum matrix composites

HIGH TEMPERATURE OXIDATION BEHAVIOR OF Fe40Al/TiC COMPOSITES

Investigation of interfacial thermal stabilities of Nbf/TiAl composites with and without Al2O3 coating in interface

Microstructure Evolution and Oxidation Behaviour of Tif / TiAl 3 Composites

Effect of surface modification on interfacial microstructures and mechanical properties of continuous CF/Al composites

Oxidation Performance and Interdiffusion Behavior of a Pt-Modified Aluminide Coating with Pre-deposition of Ni

Microstructure, Mechanical and Tribological Properties of NiAl Matrix Composites with Addition of BaO/TiO2 Binary Oxides

Effect of heat treatment parameters on microstructure evolution, tensile strength, wear resistance, and fracture behavior of Ni–Ti multilayered composites produced by cross-accumulative roll bonding

Preparation and Mechanical Properties of TiN-Al<sub>2</sub>O<sub>3</sub> Refractory Composites

Manufacture and Properties of AlON-TiN Particulate Composites

Microstructure evolution, mechanical properties, and strengthening mechanisms of heat-resistant Al-based composite reinforced by a combination of AlN and TiN particles

Direct Laser Fabricated in Situ TiC Particulate Reinforced Ni30Al20Fe Intermetallic Matrix Composite

Effect of TiB2 on Microstructure, Mechanical Properties and Oxidation Resistance of TiAl-based Alloys

Study on Microstructure and Mechanical Properties Modification of Cu-Ti3AlC2 Composites by Ni Element

Ni Interlayer Induced Strengthening Effect in Alumina/alumina Joint Bonded with Ti/Cu/Ni/Cu/Ti Composite Foils