Abstract:Rate-dependent plastic deformation behavior of TiZrHfCuNiBe high entropy bulk metallic glass (HE-BMG) is investigated by the nanoindentation and quasi-static compression tests. The experimental results reveal that the pop-in sizes during nanoindentation and the serrations sizes under compression will reduce when the loading/strain increases. The strain rate sensitivity during nanoindentation creep is enhanced as loading rate increases, which represents more homogeneously deformation of TiZrHfCuNiBe HE-BMG at higher loading/strain rate. The average serrations sizes of TiZrHfCuNiBe HE-BMG are significantly smaller than that of traditional bulk metallic glasses. The plastic deformation behavior of the TiZrHfCuNiBe HE-BMG is discussed with respect to the self-organized critical (SOC) state behavior. The results demonstrated that the shear-band interactions of multiple shear bands could affect the SOC behavior and inhomogeneous deformation. Research suggests the shear transformation zone (STZ) sizes become smaller as the loading rate increases based on the statistical analysis. It is ascribed to have a larger shear band density at lower loading/strain rate. The current research is in coincidence with the shear-band patterns shown in microscopic micrographs of specimen surfaces. More shear-banding distributions at the lower loading/strain rate will result in more inhomogeneous deformation.

Strain Rate Response of a Ti-based Metallic Glass Composite at Cryogenic Temperature

Strain-rate-dependent Deformation Behavior in a Ti-based Bulk Metallic Glass Composite Upon Dynamic Deformation

Temperature Dependent Dynamic Flow Behavior of an In-Situ Ti-based Bulk Metallic Glass Composite

Compressive Behavior of Ti_(40)Zr_(25)Ni_8Cu_9Be_(18) Bulk Metallic Glass at Cryogenic Temperature

Tensile Deformation Mechanisms of an In-Situ Ti-based Metallic Glass Matrix Composite at Cryogenic Temperature

Strain Rate Sensitivity and Deformation Behavior in a Ti-based Bulk Metallic Glass Composite

Strain rate response of mechanical behaviors for a Zr-based bulk metallic glass matrix composite

Quasi-static and Dynamic Deformation of an In-Situ Ti-based Metallic Glass Composite in Supercooled Liquid Region

High temperature deformation behaviors of the Zr 63.36 Cu 14.52 Ni 10.12 Al 12 bulk metallic glass

The cryogenic mechanical property deviation of Ti-based bulk metallic glass composite induced by interstitial element

Deformation Behavior of a Ti-based Bulk Metallic Glass Composite in the Supercooled Liquid Region

Deformation Behavior of Zr55.9Cu18.6Ta8Al7.5Ni10 Bulk Metallic Glass Matrix Composite in the Supercooled Liquid Region

Enhanced Strength and Plasticity of A Ti-Based Metallic Glass at Cryogenic Temperatures

Structural transformation and rheological processes in bulk metallic glass Zr41Ti14Cu12.5Ni10Be22.5

Cryogenic Mechanical Property and Deformation Behavior of a Ti-based Metallic Glass Matrix Composite by Three Point Bending Tests

Deformation behavior of a Ti-based bulk metallic glass composite with excellent cryogenic mechanical properties

Strain Rate Dependence of Mechanical Behavior in a CuZr-based Bulk Metallic Glass Composite Containing B2-CuZr Phase

Rate-dependent Plastic Deformation of TiZrHfCuNiBe High Entropy Bulk Metallic Glass

Strain Rate Response of a Zr-based Composite Fabricated by Bridgman Solidification

Mechanical properties of Ti16.7Zr16.7Hf16.7Cu16.7Ni16.7Be16.7 high-entropy bulk metallic glass

Strain-rate effect on yielding behavior of an in-situ Ti-based metallic glass matrix composite upon dynamic compression