Abstract:A mixed-potential type gas sensor using stabilized zirconia (YSZ) and a sensing electrode (SE) that consists of the new type composite oxide Ni3V2O8 was developed for ammonia (NH3) detection at elevated temperature, such as 650°C. The Ni3V2O8 materials were synthesized from Ni(NO3)2·6H2O and NH4VO3 through the sol–gel method. Ni3V2O8 sintered at different temperatures was also characterized using X-ray diffraction (XRD) and field-emission scanning electron microscopy (FESEM). The present study mainly focused on the effect of sintering temperature of SE materials (800°C, 1000°C, 1200°C) on NH3 sensing characteristics. Results showed that the Ni3V2O8 calcined at 1000°C exhibited the largest sensitivity in an NH3 concentration range of 50–500ppm at 650°C. The response for the sensor attached with a Ni3V2O8-SE sintered at 1000°C to 100ppm of NH3 was approximately −62mV. Moreover, ΔV almost varied linearly with the logarithm of NH3 concentration in the range of 50–500ppm, which the slope was −96mV/decade. Furthermore, the present sensor also displayed small drifts over 30 days and cross-sensitivities in the presence of various interfering gases. The high-sensing characteristics of the sensor attached with a Ni3V2O8-SE sintered at 1000°C to NH3 are explained in terms of the micro-structure of the SE and the high electrocatalytic activities induced by the beneficial effect of the interaction between the Ni and V two metal oxides.

Sub-ppm H2S Sensor Based on YSZ and Hollow Balls NiMn2O4 Sensing Electrode

Sub-ppb Mixed Potential H2S Gas Sensor Based on YSZ and Nd2AO4 (a=cu, Ba and Ni) As a New Type of Sensing Electrode

YSZ-based Solid Electrolyte Type Sensor Utilizing ZnMoO4 Sensing Electrode for Fast Detection of Ppb-Level H2S

YSZ-based mixed potential H2S sensor using La2NiO4 sensing electrode

An Enhanced YSZ Gas Sensor through Optimizing Electrode Thickness for ppb-level H2S Detection

Sub-Ppm H2s Sensor Based On Nasicon And Cocr2-Xmnxo4 Sensing Electrode

A Mixed-Potential Gas Sensor with Heterojunctions Based on Co3O4/ZnO/Y2O3 Nanocomposite for Low Concentration H2S Detection

Sensing Characteristics And Mechanism Of Hydrogen Sulfide Sensor Using Stabilized Zirconia And Oxide Sensing Electrode

A Mixed-Potential Type NH <sub>3</sub> Sensor Based on Spinel Zn <sub>2</sub>SnO <sub>4</sub> Sensing Electrode

NiO-CuO Hydrangeas-Like Composite Derived from Ni/Cu Bimetallic MOFs for Sensitive Detection of H2S at Room Temperature

Hydrogen Sulfide Sensor Using Stabilized Zirconia and Oxide Sensing Electrode

Stabilized Zirconia-Based Mixed Potential Type Sensors Utilizing MnNb2O6 Sensing Electrode for Detection of Low-Concentration SO2

Optimizing Triple Phase Boundary in Ysz Based Electrochemical Gas Sensor for Sensing Ppb-Level H2s at Low-Temperature

Amperometric H2S Sensor Based on a Pt-Ni Alloy Electrode and a Proton Conducting Membrane

Sensitive, Selective, and Fast Detection of Ppb-Level H2S Gas Boosted by ZnO-CuO Mesocrystal.

Solid-state potentiometric H2S sensor combining NASICON with Pr6O11-doped SnO2 electrode

Heterostructured NiO/ZnO Nanorod Arrays with Significantly Enhanced H2S Sensing Performance

Mixed-potential Type NH3 Sensor Based on Stabilized Zirconia and Ni3V2O8 Sensing Electrode

High Performance H2S Sensor Based on Ordered Fe2O3/Ti3C2 Nanostructure at Room Temperature

ZnO Nanoparticle-Based MEMS Sensors for H2S Detection

Mixed-potential type NH 3 sensor based on stabilized zirconia and Ni 3 V 2 O 8 sensing electrode