Abstract:The graphical abstract is about transient thermal stress fields of different component materials at different moments of time, changes in relative density and open porosity of ceramic materials at different B4C volume fractions and changes in mechanical properties of ceramic materials at different holding times. In addition, the graphical abstract has information on SEM morphology of specimen sections at different sintering temperatures and SEM images of crack propagation in the TiB2‐20 vol% B4C ceramics. A finite model incorporating microstructure was developed to investigate the thermal shock resistance of TiB2‒B4C composite ceramic cutting tool materials. Numerical simulations were conducted to analyze changes in the transient temperature field and thermal stress field during the thermal shock process. TiB2‒B4C composite ceramic tool materials were fabricated using discharge plasma sintering technology. With different B4C contents, different sintering temperatures and holding times as study variables, optimization of the sintering process parameters and ceramic material components was achieved through testing the mechanical and microscopic morphology of the ceramics. Thermal shock water quenching experiments were performed, and the strength‐decay method was employed to assess the thermal shock resistance of TiB2‒B4C ceramics. The findings indicate that the optimal sintering conditions are temperature of 1700°C and holding time of 5 min. The TiB2‒B4C ceramic material containing 20 vol% B4C exhibits superior comprehensive mechanical properties and thermal shock resistance, and its relative density, fracture toughness, hardness, and flexural strength were 99.3%, 6.8 MPa m1/2, 22.8 GPa, and 598 MPa, respectively. The critical thermal shock temperature difference falls within the range of 400°C‒500°C.

Preparation of TiB2/WC/h-BN micro-nano composite gradient self-lubricating ceramic tool material

Nanostructured Diamond-Tic Composites with High Fracture Toughness

Microstructure and performance optimization of Al2O3/TiC/TiB2/h-BN@Al2O3 self-lubricating ceramic tool materials

Effect of TiB_2 content on microstructure and mechanical properties of in-situ fabricated TiB_2/B_4C composites

Mechanical property and cutting performance of (W,Ti)C based ceramic composites with the addition of nano-sized CaF2

Design, optimization, and verification of self‐lubricating ceramic tool microstructure by MC method

Design and optimization of TiB2‐based ceramic tool materials based on fuzzy theory

Mechanical properties, microstructure and crack healing ability of Al2O3/TiC/TiB2/h-BN@Al2O3 self-lubricating ceramic tool material

Microstructure and Mechanical Properties of TiN–TiB2–hBN Composites Fabricated by Reactive Hot Pressing Using TiN–B Mixture

Optimization of sintering parameters for fabrication of Al2O3/TiN/TiC micro-nano-composite ceramic tool material based on microstructure evolution simulation

Microstructure and Toughening Mechanisms of Al2O3/(W, Ti)C/graphene Composite Ceramic Tool Material

Preparation of WC-TiC-Ni3Al-CaF2 functionally graded self-lubricating tool material by microwave sintering and its cutting performance

High-Pressure synthesis of Al2O3-cBN-hBN Self-lubricating ceramic

Preparation of WC@graphene reinforced titanium diboride‐based composite ceramic materials fabricated via SPS

Synthesis and Mechanical Properties of TiB2/Ti2AlN Composites Fabricated by Hot Pressing Sintering

Preparation and cutting performance of Ti(C7, N3)/TiB2/WC cermet tool material

Mechanical properties and thermal shock resistance of TiB2‒B4C composite ceramic tool materials at microscopic scale

Mechanical properties and cutting performance of laminated graphene composite ceramic tools

Mechanical and tribological properties of hot-pressed h-BN/Si3N4 ceramic composites

Preparation and characterization of Si3N4-based composite ceramic tool materials by microwave sintering

Microstructure and Mechanical Properties of Cu Matrix Composites Reinforced by TiB2/TiN Ceramic Reinforcements