Abstract:Fracture behavior and mechanical properties of SiC nanofiber (SiCNF) reinforced SiC nanocomposites as influenced by the thickness of amorphous carbon (a-C) coatings are studied via molecular dynamics simulations using Tersoff potential. To simulate the condition that a matrix crack arrives at the interface between matrix and coating, a pre-setting matrix crack is created. Results show that the tensile stress-strain curve of nanocomposites without and/or with thin a-C coatings (e.g., t≤ 0.3 nm) demonstrates an abrupt drop after achieving a maximum value, while nonlinear tails appear in the curves of nanocomposites with thick a-C coatings (e.g., t >2.0 nm). It is demonstrated that the SiCNF is penetrated by the matrix crack when it is uncoated and/or coated by a thin a-C layer (t ≤ 0.3 nm) and the nanocomposite fails in a typical brittle mode; whereas the crack deflection path changes and the SiCNF is pulled out from the matrix when the a-C coatings are thick enough (e.g., 4 nm), showing a different fracture mode in nanocomposites. Compared to nanocomposites without an a-C coating, the tensile strength of nanocomposites with a-C coating of 4.0 nm thickness is about four times higher, and the fracture energy increases around an order of magnitude. Furthermore, the average stress concentration factor for SiCNF in nanocomposites, defined as the ratio of tensile strength of single SiCNF to the average stress of the nanofiber in the composite when it is broken, is extracted and shows a decreasing trend with increasing coating thickness, indicating that a-C coating can therefore be expected to simultaneously enhance the tensile strength and fracture energy of the SiCNF/SiC nanocomposites. This work sheds light on the toughening mechanism in SiCNF/C/SiC nanocomposites where a-C coating plays a significant role, indicating that the toughening mechanism in conventional ceramic matrix composites on a microscale is still valid on a nanoscale. Simulation results suggest that coating thickness in material design is efficient for engineering SiCNF/SiC nanocomposites with high strength and toughness.

Fracture and toughening mechanisms in SiC nanofiber reinforced SiC matrix nanocomposites with amorphous carbon coatings

Molecular Dynamics Study on Tensile Behavior of Sic Nanofiber/C/Sic Nanocomposites

Multiscale Investigations into the Fracture Toughness of SiC/graphene Composites: Atomistic Simulations and Crack-Bridging Model

Fracture Behaviour of SiCp/Al Composites with Network Architecture

Study on the fracture behavior and toughening mechanism of Si3N4/SiC(n)/SiC(w) nanocomposites

The Fracture Behaviors of Carbon Nanotube and Nanoscroll Reinforced Silicon Matrix Composites

Fracture behavior of multlayer SiC/C composites

Oxidation-protective and Mechanical Properties of SiC Nanowire-Toughened Si–Mo–Cr Composite Coating for C/C Composites

Dynamic Compressive Fracture of C/SiC Composites at Different Temperatures: Microstructure and Mechanism

Fracture behaviors of Al2O3-SiC composites containing various sizes and fraction of fine SiC particles

Fracture Mechanical and Ablation Behaviors of C/SiC-Cu3Si-Cu Interpenetrating Composites and Their Dependence on Metal Addition and Interface Thickness

Fracture Behavior of Sic/Sic Composites with Different Interfaces

Research Progress on Toughening Mechanism and Interphase Property Testing Methods of SiCf/SiC Ceramic Matrix Composites

Molecular Dynamic Simulations of Toughness Mechanisms for Β-Sic Ceramics

Experimental and Numerical Investigations of Tensile Properties of SiC Particle‐Reinforced Composites

Strengthening-toughening Effect and Mechanism of Si_3N_(4p)-SiC_w/MoSi_2 Composite

Effect of Amorphous Carbon Coatings on the Mechanical Behavior of Silicon Carbide Nanowire

Damage Behavior and Toughening Mechanism of SiCf/SiC-Ti3SiC2 Composites: A Combination of Digital Image Correlation and Acoustic Emission

Transformation of Fracture Mechanism and Damage Behavior of Ceramic-Matrix Composites During Nano-Scratching

Tailoring the toughening effects in two-dimensional nanomaterial-reinforced ceramic matrix composites

Microstructure and mechanical properties of Si3N4f/Si3N4 composites with different coatings