Abstract:In electronic packaging industry, it has been reported that compared with nano silver and nano copper, the complementation and coordination of Ag and Cu components enable bimetallic nanomaterials enhanced anti-electromigration and oxidation inhibition characteristics. Ag-Cu solid solution nanoparticles (ACDS NPs) has become an emerging substitution and garnered widespread attention. This research presents the investigation into the size-dependent melting behaviour of ACDS NPs and the effect of elevated temperature during the pressure-free sintering with Ag substrate through molecular dynamics simulations. The melting points of ACDS NPs turn out to be in accordance with Gibbs Thomson equation, based on which the suitable sintering temperatures have been determined within 473 and 773 K. As demonstrated by dynamic trajectories at cross section while sintering, coalescence between NPs occurs with the atomic surface diffusion at the sintering neck along the vacancy concentration gradient. 623 K is estimated to be a threshold temperature of complete integration of NPs at which the crystallographic structure collapses during sintering and recrystallizes at the late sintering stage. The dominant sintering mechanisms transferred from surface diffusion and dislocation-based plastic deformation below 573 K to atomic diffusion above 623 K. Furthermore, the results present incontrovertible dominance of Shockley dislocations and interaction energy on determining mechanical properties of sintered atomistic system. It is also revealed that the systems sintered below 673 K yield significantly lower thermal conductivity attributing to the strong localization of heat carriers for intrinsic amorphous structure than crystalline counterparts above 723 K.

Deep Crystallization Induced High Thermal Conductivity of Low-Temperature Sintered Ag Nanoparticles

Non-Isothermal Crystallization of Aqueous Nanofluids with High Aspect-Ratio Carbon Nano-Additives for Cold Thermal Energy Storage

Atomic Insights into the Sintering Behaviour of Ag-Cu Solid Solution Nanoparticles on Ag Substrate

Synthesis and Low-Temperature Sintering of Tin-Doped Silver Nanoparticles

Sintering of the ultrafine Ag-SnO2 powders prepared by electroless silver plating

Mechanism of Low Temperature Sintering-Bonding Through In-Situ Formation of Silver Nanoparticles Using Silver Oxide Microparticles

Enhanced pressureless bonding by Tin Doped Silver Paste at low sintering temperature

High Electrical and Thermal Conductivity of Nano-Ag Paste for Power Electronic Applications

Rapid preparation of sintered Ag nanoparticles pastes for high-power electronic packaging

Low Temperature Sintering of Silver Nanoparticle Paste for Electronic Packaging

Facile and Scalable Synthesis of Ag Nano‐Flowers That Can Be Sintered below 120 °C

A Study on the Low Temperature Sintering-Bonding Through In-Situ Formation of Ag Nanoparticles Using Ag2o Microparticles

Elucidation of the capillarity-promoted sintering of silver nanoparticles produced by a spark ablation vapor source

Fabrication and Sintering Effect on the Morphologies and Conductivity of Nano-Ag Particle Films by the Spin Coating Method

Low Temperature Sintering-Bonding Through In-Situ Formation of Ag Nanoparticles Using Micro-Scaled Ag_2O Composite Paste

Sintering mechanisms and mechanical properties of joints bonded using silver nanoparticles for electronic packaging applications

Study on the Sintering Characteristics and Application in Cu Bulk Bonding of Ag-nanoparticle Paste

Low Temperature Sintered Silver Nanoflake Paste for Power Device Packaging and Its Anisotropic Sintering Mechanism

Sintering bonding process with Ag nanoparticle paste and joint properties in high temperature environment

Low-Temperature Sintering with Nano-Silver Paste in Die-Attached Interconnection

Improvement of Bondability by Depressing the Inhomogeneous Distribution of Nanoparticles in a Sintering Bonding Process with Silver Nanoparticles